1859 questions
Cannot activate
I HAVE PAID FOR on 1/20/22, AND DOWNLOADED BOOST SPEED 12.2.0.0. AND REGISTERED WITH THE SUPPLIED KEY.
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
Not able to install an upgrade for Boostspeed 12.2.0.0
I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
The System Information report for my external backup hard drive above shows the following;
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Delete wrong user
After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
Windows refusing access as administrator
Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
Could not activated my license
I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
Program not registered
As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.
Thank you
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
Content hidden to protect privacy
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
Content hidden to protect privacy
THANK YOU
Aktivation not Possibel
Hi
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Content hidden to protect privacy
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー：
Auslogics BoostSpeed 12
Content hidden to protect privacy
Bluetooth driver
When I bought this I ran a scan and was using my wireless mouse after the scan I was unable to use my mouse. Would this software delete my driver if so how would I get it back?
Background processes
I have the idea that background processes lower the framerates of my flight simulator, leading to stutters. When I examine the resource monitor, I see that about 200 background processes are running, even when totally none program is active. I cannot image why all those processes are neccessary. All those processes have names that doesn't give my any insight in what all those processes are doing. How can I find out which processes I can stop and which are mandatory?
Driver is Unavailable
My Win 10 (64bit) PC can find my Epson printer on my local network, connected by ethernet cable to my router, and installs the "necessary files". However, afterward in my settings it shows the printer with "Driver is Unavailable" and nothing will print. Both my wife's PC and all of our iPhones/iPads have no issues printing so I know it is connected properly and functional. The only device having an issue is my PC. I have removed the printer and reinstalled it multiple times with the same result. I have also downloaded and installed the newest drivers available from Epson for this printer but somehow my computer does not seem to be able to find or recognize them. A support request has been sent to Epson but so far any suggestions from their automated response system have not be successful.
Errors 0x80070091 and 0x8007016a
Can the pro version of Auslagics find and repair the cause of errors 0x80070091 and 0x8007016a?
Dasboard SCAN cannot terminate CHROME.EXE
After running a SCAN, and choosing to resolve the issues that were found, BoostSpeed 13 is unable to terminate Chrome.exe.
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
Unable to update Windows 11 to 22H2....
My computer has stopped being able to use Windows Update to install normal updates, including Windows 11 22H2. All software and drivers are up to date. I have late generation motherboard (Asus Rampage VI Extreme), intel CPU 10980XE, and nVidia 3090. I have followed multiple scripts from the internet to clean out the software update folder. Any ideas?
советы из Youtube не помогают
Имею постоянную проблему с обновлением Windows 11. Посоветуйте действенній алгоритм решения. Или лучше переустановить?
bluetooth dissapeared from device manager after cleanup
Hi,
I did a rigorous cleanup and driver update on a old(er) laptop, after years of limited maintenance. Using Auslogic software (driver update,bootspeed,duplicate finder) and some manual cleaning/updating, Something went wrong, not sure exactly where. Now I can not use/connect bluetooth devices anymore. I tried to solve it by doing some reasearch on the internet but can not find the solution. Otherwise the Laptop is working fine and is a lot faster.
Enclosed you will find some information of the laptop and screenshots of what I think is relevant information.
I also noticed that Bluetooth is not longer available at the 'action center' and 'device manager'. The latter one still shows some bluetooth devices but is hidden and do not seem to be the relevant items.
In 'Settings> bluetooth and other devices', the previously connected bluetooth devices are still there but it clearly states that bluetooth is turned off.
Could you please advise me on how to solve this.
Enclosed a couple of prinscreens of the systems and the above mentioned screens.
FYI I am an experienced user, however certanly not a Windows specialist.
Kind regards.
Perry Parengkuan
I did a rigorous cleanup and driver update on a old(er) laptop, after years of limited maintenance. Using Auslogic software (driver update,bootspeed,duplicate finder) and some manual cleaning/updating, Something went wrong, not sure exactly where. Now I can not use/connect bluetooth devices anymore. I tried to solve it by doing some reasearch on the internet but can not find the solution. Otherwise the Laptop is working fine and is a lot faster.
Enclosed you will find some information of the laptop and screenshots of what I think is relevant information.
I also noticed that Bluetooth is not longer available at the 'action center' and 'device manager'. The latter one still shows some bluetooth devices but is hidden and do not seem to be the relevant items.
In 'Settings> bluetooth and other devices', the previously connected bluetooth devices are still there but it clearly states that bluetooth is turned off.
Could you please advise me on how to solve this.
Enclosed a couple of prinscreens of the systems and the above mentioned screens.
FYI I am an experienced user, however certanly not a Windows specialist.
Kind regards.
Perry Parengkuan
Richiesta di pulizia del browser web
Buonasera,
quando per "risolvere tutti gli elementi" la schermata mi chiede di chiudere tutte le applicazioni aperte, mi elenca n. 5 msedege.exe che non riesco a chiudere né manualmente né col pulsante "chiudi tutto". Utilizzando "Ignora", mi rimangono 214 tracce nel browser web ed il semaforo mi rimane rdi colore rosso.
Cosa posso fare?
Ringrazio anticipatamente per il disturbo.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
Long Boot time and black screen while booting
I have a ACER Nitro 5 laptop (windows 10 home original), mainly for entry level gaming. I am using laptop/desktop from last 12 years and I have moderate knoweldge on S/w issues, how to keep the laptop fast (by defragmenting, registry cleaning etc.). Recently I am facing Boot issues thats getting frustrating. Initially it started with long booting time, it was taking 7-10 minutes to reach to user account (Pin), and during that time the CPU and GPU fan speed was getting super fast (like during heavy usage).
Now from last couple of days, once I switch the laptop on, no display is coming, its just a black screen. However, CPU light was on, Key-board backlit was on and fan was rotating, but no display. If I wait the also nothing happening. Every time I need to force shut down it (by long pressing) and then if I restart again, its getting started properly.
Not sure what's the issue. I have checked prgrams that starts while booting, no issue there. No external device was attaching with my laptop while booting. stopped windown fast boot service also. But no progress.
Please suggest. can it be my HDD (1 TB I have) getting damaged? suggest if any other reason might be there.
Now from last couple of days, once I switch the laptop on, no display is coming, its just a black screen. However, CPU light was on, Key-board backlit was on and fan was rotating, but no display. If I wait the also nothing happening. Every time I need to force shut down it (by long pressing) and then if I restart again, its getting started properly.
Not sure what's the issue. I have checked prgrams that starts while booting, no issue there. No external device was attaching with my laptop while booting. stopped windown fast boot service also. But no progress.
Please suggest. can it be my HDD (1 TB I have) getting damaged? suggest if any other reason might be there.
ignoring cache and thumbnails
Hi guys,
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7