1859 questions

I am not getting full gigabit speed on only my computer.

Hello all, happy holidays!

Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.

I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point

1224 views
Dec 27, 2019 at 02:53 AM

My Gmail account in Windows mail won't send.

Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
George

1440 views
Dec 25, 2019 at 07:43 AM

cannot delete HKEY Acronis

Cannot install/activate Acronis s/w due to Registry problem

4972 views
Dec 24, 2019 at 05:54 PM

System Scan

When I am doing a system scan the scanner takes almost 30 minutes or more when it gets to temporary files. Is there something I can do to speed this up?

965 views
Dec 23, 2019 at 12:55 PM

Не получается запустить.

Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)

1354 views
Dec 22, 2019 at 10:39 PM

Windows upgrade

Hi
I am using the BoostSpeed11 product prior to an effort to upgrade from Windows 7 to Windows 10.
I have tried before using the product but get the error message 0x8007042B-0x3000D Failure to migrate data on first boot.
I have just cleaned up the zero bytes folders, traces and duplicate files.
There is some thought that antivirus should be stopped while attempting the upgrade. I am presently using Eset internet security.
When performing the migrate data upgrade are all the files carried over? How much should be backed up?
Any hints you can provide will be gold.
In the event that I finally get the upgrade done which of your products should I install, and is it OK to leave the product I have
installed while performing the upgrade?
Eset has logged the driver checker of yours as a pup.What's the go there?

Regards
Petar

1334 views
Dec 19, 2019 at 08:58 AM

BSOD

I have new core i3 4130 with 500gb hard disk and 8 gb ram with all drivers updated but my windows crashes frequently I have scanned the whole pc no virus found then why is this happening?

1421 views
Dec 19, 2019 at 07:52 AM

slow computer.

hello, im valeri i have to ask why is my computer slow? pls send me the answer
i have to thank this program for helping me and i rly would like if this progarm helps me more
thank u -valeri

1133 views
Dec 18, 2019 at 04:01 PM

Transfer of Auslogics boot-speed and main question about my current laptop situation

Greetings Aus Q,

Go ahead and ding me if this is perceived as more than one question.

Currently, I'm using my old laptop with Win 7 and BIOS date October 2009, with 2 GB memory stick added for a total of 4GB. Over a year ago, I bought a Dell Inspirion 15 3000 (3565). Within the warranty period, on the 1803 or 1809 Win 10 update, something happened. Sent back to Dell, and got motherboard replaced and something else. Other issue was my display. Dell said I broke the display and would not fix it.

Money was tight and I could not replace it and went back to my current laptop on Win 7. I spend too much time trying to keep my Win 7 laptop running at a decent clip with the quality Auslogics boot-speed program.

A) I was surprised when I checked Amazon, they have a great price on replacement displays. If I could get a new display, add an extra 4 GB mem stick to give me 8 GB RAM, and research a compatible( or suggestions from you) quality SSD to rplace my HDD for under $200, or buy new laptop with the necessary chit for my sole proprieter business in the $400-600 price range; what would you do?

B) With Win 7 losing support in a month, and all the Win 10 update problems, I was thinking about transitioning to a Linux distro similar to Windows. Make sense from a security issue position?

C) Is it worth looking for a higher end almost new/used laptop on Craigslist or other avenue?

D) Also, my AUS b-s license, can I transfer it to my Dell or to the new pc?.

Thank you,

Jim Copeland

Content hidden to protect privacy


978 views
Dec 14, 2019 at 09:57 PM

Bluetooth not working

Bluetooth isi not working. Please suggest remedial measures to resolve the issue.

1738 views
Dec 14, 2019 at 03:30 AM

Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it

Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?

1176 views
Dec 13, 2019 at 07:36 PM

Google Drive File Stream Stops Working

How do I prevent BoostSpeed from interfering with Google Drive File Stream? Each time I scan, I lose connection to the Google Drive File Stream and have to uninstall and re-install it.

943 views
Dec 12, 2019 at 02:08 PM

Defragment

How to do offline defrag of system files

1305 views
Dec 12, 2019 at 06:23 AM

Несовместимость Auslogic BootSpeed 11 и противовирусных программ:ESET Internet Security версии 12.2, Dr.Web

Установленная у меня лицензионная программа Auslogic BootSpeed 11 постоянно конфликтует с программой ESET Internet Security версии 12.2, а программа Dr.Web Curelt! просто удаляет Auslogic BootSpeed 11, как несущую угрозу компьютеру (вирусная угроза!). Прошу Вас разовбраться в этой проблеме. С уважением, Шишков Руслан Владимирович

1082 views
Dec 10, 2019 at 03:49 PM

please solve driver problem

my computer show unknown device please solve driver problem

1023 views
Dec 10, 2019 at 02:05 PM

Minecraft

modを使ってマイクラを楽しんでプレイしてるんですが、最近forgeを28.1.76から最新のものに変えたら、起動するんですがメニュー画面まで行かなくなりました。
どうすればいいのでしょうか?
いちおう、エラーログを添付しますので教えて下さい。お願いします。

1106 views
Dec 10, 2019 at 05:25 AM

File transfer software

I thought you guys offered a file-transfer system a while ago. Or am I mistaken?
I want to send a 300 MB video to a colleague, but could not find any reference in the main menu to do so.

1798 views
Dec 10, 2019 at 12:05 AM

Computer freezes up

One of the reasons I purchased Ausilogic is to help me with performance. My computer freezes up for 10 seconds or so every few minutes. I don't know if hardware is failing, if there is a miscatch among compenentry.
How can we use your products to solve it.
So far, I haven't been able to eleminate this problem

5154 views
Dec 09, 2019 at 03:58 PM

How can I keep my pc secure

When updates for win 7 stop, how can I keep my computer safe please. I don't want to upgrade. Thanks.

1142 views
Dec 09, 2019 at 03:34 AM

Keep document lists

How can I keep my document lists?

These disappear from my Start/Documents list and the list in each program (Word, Excel).

I have searched and searched and can't find this referenced.

Thank you.

John Zwolanek
Deforest, Wisconsin, USA

Content hidden to protect privacy

605 views
Jan 08, 2023 at 08:25 PM

Getting different kinds of BSOD's

Hello and good morning, I'm not very good at softwares and know-how's on PC but I've tried using this program to probably fix the cause of what could be causing the BSOD's on my PC. After I tried to use the Auslogics Driver Updater, I updated some of the drivers and it asked me to restart so I did. After I restarted, the pc kept giving me a BSOD where it was written something like: Boot device inaccessible. So I couldn't even put the password and login properly. I had to restore the data to a certain point so I could get my pc back. I'm not sure what the problem is yet so I decided to write this message to you and ask for a helping hand.

Thank you in advance for your time,

Pedro
605 views
Nov 05, 2023 at 11:32 AM

Addressing a specific drive

Firstly, what a wonderful piece of software. Always very cautious about programmes which can permanently delete items and never apologise when deleting an incorrect one. So far this is behaving perfectly.

My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.

By chance is this an Australian designed programme?

Sincerely


John Terry
604 views
Nov 14, 2022 at 11:50 AM

Unable to open any image file via photos

I am getting an error when i am double clicking an image file, which normally used to open with "photos" app.

The error is "No such interface supported"

603 views
Oct 27, 2022 at 02:32 PM

USB

USB non détectée dans le gestionnaire de périphérique
603 views
Jan 15, 2023 at 06:21 PM

BoostSpeed always errors off

I installed 3 times and did 3 scans but each time it said:

Error EDrive not found Exception. Drive could not be found.

What can I do?
603 views
Feb 05, 2023 at 04:00 AM

Free disk space issue

I have two external HD of exactly the same size, 3.63 TB, they both hace exactly the same amount of data stored on them both, 1.84 TB, 2240 files, 61 folders. My issue is that the "free space" shows a difference amount, 1.50 TB verse 1.55 TB. I have ensured that recycle bin on them both are empty and ran every program that would make sense with the confines of BoostSpeed 13 and nothing seems to make any difference. This isn't the only example of this sort of thing happening. I'm bewildered. Please advise.

By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
603 views
Apr 03, 2024 at 05:30 PM

メモリーを有効利用

CADソフト等を利用していると、メモリー不足から動作が遅くなり、場合によっては稼働しなくなります。
メモリーは32GB搭載していますが有効に使用できていないようです。
Auslogics BoostSpeed12で、メモリー管理の設定がありますか。

адаптер

Почему не запускается и как обновить
599 views
Feb 14, 2023 at 10:24 AM

проблема с компом

здраствуйте,помогите с проблемой. Компьютер очень сильно глючит ,возможно это связано с устнавления какого то вируса? что можно сделать в ситуации?
599 views
Oct 18, 2022 at 06:30 PM

external hard drive recovery

so i have ran check disk a few times on a external hard drive to see if i can possibly repair the thing and if not recover some things that are still on it. windows does not recognize the drive but 3rd party software does, so as i'm running check disk it sees one bad sector like at somewhat of the begging of the scan then it continues and runs almost to the end of the scan but does'nt qiute finish the scan, instead it suddenly stops, the screen goes black for a second and then it reboots windows and thats it. no log of what happened at the time of crash or the condition of the drive or the end result...nothing. so i'm wondering if you can shed some light on the situation and maybe some remedies if any? thanks, cweklund

P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
598 views
Feb 05, 2023 at 12:28 AM

Spinner GIF Keeps Spinning on Some Websites

Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.

Windows and the browsers are all up-to-date.

When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.

Any suggestions?
598 views
Feb 16, 2023 at 02:57 PM

printer does not print after running Auslogic

can you help to sort out problem with printing after "optimisation" of notebook by running Auslogic. Aslo smart car readerstopped working. Card reader was not recognised, one of the services was disabled by the Booster. Smart card reader problem was solved by enabling the service, but the printer does not work still.
598 views
Oct 20, 2022 at 12:38 PM

Deleting unnecessery mails

how can I delete and tide my email up in the lowest posible time?
597 views
May 07, 2023 at 02:15 AM

Latest update

Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
597 views
Nov 30, 2022 at 02:35 AM

Drive C: - Reports Disk has errors

The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.

Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.

How do I find out what the errors are and how do I repair them?

Regards, Harry McBride
595 views
Jan 26, 2022 at 08:59 PM

Auslogics Boost speed

I subscribed to Boost spoeed 9 a while ago and it worked as expected.. It had a function of Scan Repair and sleep.. good for the end of the day.
However as the program is up dated it no longert has that function and I find I have to buy a new licence for each up date. . With out the scan repair and sleep ,it seems not now wortyh paying for more up dates.
What can i do and shall i lookj for another program that will do that for me

Thank you

Bob Parr
594 views
Jan 28, 2023 at 10:50 PM

Turning on RAM optimization

How do I turn on RAM optimization with Auslogics BootSpeed 13??
594 views
Nov 08, 2022 at 10:40 PM

Ping

What are some efficient ways to lower ping when gaming on windows 10?
593 views
May 29, 2023 at 07:14 PM