1897 questions

Not able to install an upgrade for Boostspeed 12.2.0.0

I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0

923 views
Jan 27, 2022 at 03:38 PM

проблема с регистрацией

Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
974 views
Jan 26, 2022 at 10:24 PM

Drive C: - Reports Disk has errors

The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.

Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.

How do I find out what the errors are and how do I repair them?

Regards, Harry McBride
619 views
Jan 26, 2022 at 08:59 PM

System Information Report

The System Information report for my external backup hard drive above shows the following;

ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail

What does this mean and how do I fix it?
990 views
Jan 26, 2022 at 08:33 PM

Lizenz

Warum wurde meine Lizenz gesperrt ich kann das Programm nicht mehr öffnen ich habe im Dezember 2021 verlängert und gekauft. Bitte um Freischaltung. Danke
831 views
Jan 26, 2022 at 07:56 PM

Delete wrong user

After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
866 views
Jan 26, 2022 at 04:58 PM

Unable to activate Auslogics Bootspeed 12 PRO Version

I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
832 views
Jan 26, 2022 at 12:46 PM

Windows refusing access as administrator

Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
810 views
Jan 26, 2022 at 09:34 AM

ユーザー制御

デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。

1297 views
Jan 26, 2022 at 09:10 AM

Could not activated my license

I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
968 views
Jan 26, 2022 at 02:49 AM

Program not registered

As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.

Thank you
694 views
Jan 25, 2022 at 08:58 PM

Activating Software Problem

I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce

Content hidden to protect privacy

1022 views
Jan 25, 2022 at 05:18 PM

BOOT SPEED PRO

I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?

LICENCE N°:

Content hidden to protect privacy


THANK YOU

852 views
Jan 25, 2022 at 02:26 PM

Aktivation not Possibel

Hi

I did try to activate the pro version.
Reslult: The product has been activated

But in realatiy is the green botten still here and its not working as should when activated.

Regards
Kurt
1220 views
Jan 25, 2022 at 11:00 AM

Auslogics 12 is blocked by Windows 10

Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
1063 views
Jan 25, 2022 at 08:52 AM

Программа была заблокирована администратором

Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
523 views
Jan 25, 2022 at 08:36 AM

About Auslogics BoostSpeed 12

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

Content hidden to protect privacy

980 views
Jan 25, 2022 at 06:59 AM

Hirosuke Kajiyama

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

License key ライセンスキー:
Auslogics BoostSpeed 12

Content hidden to protect privacy

1079 views
Jan 25, 2022 at 06:46 AM

Pro version ?

Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.

Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
973 views
Jan 25, 2022 at 06:01 AM

Admin. Blocked

When trying to open Boostspeed, I am getting a popup stating Admin Blocked, go to an Administrator Integrator.exe. How can I clear this. If I re-download the basic program will open, when I type in my registration code, I'm sent to the store pager in AOL. Any help with this problem would be appreaciated.
Thank You
James Elder
1061 views
Jan 25, 2022 at 05:56 AM

Disk Defrag

HI,i have noticed a few times now that when all disks are checked my C; SSD disk gets stuck at around 71% and doesnt complete.All other SSD: ( D; E; ) finish. Even then when i stop the optimisation and uncheck disks E and D then try running just C; it still gets stuck. The only way then is to restart my PC and run optimisation only on C; it finishes the run. Its only a small hick up but i thought it best to make you aware of this/
597 views
Jul 13, 2023 at 07:26 PM

Fehlermeldung

Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:

failed download failure

was verhindert die Aktuallisierung bei dem Programm.

Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro

mfg Klaus Schwabe
597 views
Aug 31, 2023 at 10:32 PM

Is my subscription good for another device?

How many devices are covered by my subscription?

I have another laptop that I want this service on.

Guy Veasey

596 views
Apr 20, 2023 at 12:49 AM

DSN resolution failing

I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.

could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?

not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
596 views
Oct 16, 2023 at 12:48 PM

Boostspeed Benachrichtigungsanzeigen

Hallo wertes Auslogics-Boostspeed-Team,

ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.

Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?


Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
595 views
Oct 12, 2023 at 11:02 AM

deleted files

If I use duplicate file finder and click delete is the original also deleted?
595 views
Apr 03, 2024 at 02:34 PM

lost files

how do I get files back that were mysteriously lost
595 views
Mar 22, 2023 at 07:47 PM

False alarms

I have this problem for many years now and I cannot find out what’s happening. When I start Windows, I hear a number of times the ding dong sound of hardware that is connecting and disconnecting. When I look into the Control Panel > Devices and printers, I see an icon showing up and disappearing. The label says: Unknown USB device (Device Descriptor Request failed). I checked all hardware connected to the PC more than once and for each piece of hardware there’s is an icon in the Control Panel. So I really don’t know to which piece of hardware this additional icon is related. After about 20 ding dongs, the sounds stops by itself. Sometimes this issue has gone for some time, but it returns as suddenly as it has been gone.
Any comment on this issue would be appreciated.

I made a .nfo file, but I cannot attach this file to this request form.
595 views
Apr 27, 2022 at 08:29 PM

Rregister Editor

Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
594 views
Jul 17, 2023 at 01:11 PM

LOST APPS

I got myself in a bind and I resorted to installing a backup file.
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.

Cheers

Bill Wacher
593 views
Aug 05, 2023 at 04:16 AM

パソコンが熱い

  パソコンの動作が遅く、動作音も大きくなり、パソコンの排気がとても熱くなって心配です。デフラグやクリーンアップすると少しの間静かになります。問題ないのでしょうか。また、どうすればいいですか?パソコン自体は5年目です。
593 views
Sep 06, 2022 at 12:33 AM

Where to find the Optimize Tab

In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
593 views
Apr 04, 2023 at 04:14 AM

transfert photos depuis icloud

hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different

extension heic
et je n'arrive plus a les lire


please i want to have a french answer ty
591 views
Oct 16, 2023 at 06:39 AM

Removal of leftover files and registry entries after uninstall. (crashplan)

I need to remove leftover files and settings of uninstalled software, in particular I need to remove crashplan pro in order to have a clean setup and do a new installation without any registry entries or old files.

591 views
Apr 18, 2022 at 06:26 PM

won't post

Good Day!
I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!

Let me just say thank you in advance! I appreciate the offer of help!

djmes
590 views
Nov 13, 2022 at 07:35 PM

Driver Updater

Driver Updater won't scan. Says its blocked by Firewall. McAfee doesn't show that it's quareentined or blocked.
589 views
Oct 09, 2023 at 02:21 PM

System rebooting by itself when launch game

System rebooting by itself when launch game I tried to clean hardware using some methods but i think my problem is with my RTX 3090 problems I think it's overheating
589 views
May 14, 2023 at 02:53 PM

Fading icon

Hello and thank you for your hardwork
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
587 views
Sep 28, 2023 at 07:32 PM

RUNDLL32

What catogory do I run to resolve RUNDll32 not working?
587 views
Nov 12, 2022 at 04:34 PM

Diagnostic Policy Service Cannot Start.

Diagnostic Policy Service Cannot Start. Access is Denied – Error 5 Fix


587 views
Nov 02, 2023 at 09:42 PM