1897 questions
reparer windows 10
MON WINDOWS 10 NE FONCTIONNE PAS BIEN PAR DE BARRE DES TACHES NI L EXPLORATEUR DE WINDOWS
mot de passe bios perdu
j'ai un pc hp compaq 6730s sous N°=CNU9020NKN
mon mot de passe par defaut (e9lo1719s9) n'a pas d'effet
j'ai change la pile bios rien
j'ai utilise hiren's bootcd rien
Aider mois s.v.p et merci d'avance................
How do I stop starting up when I start the computer
When I start up my computer, PCTuneUp starts up. How do I prevent this from happening.
Problema con Auslogics Driver Updater
Buenos dias, tengo un problema con la aplicacion Auslogics Driver Update, ya solicite anteriormente me solucionen este problema, inclusive me solicitaron que reinstale el aplicativo, pero no se soluiciona este proble, por favor tengo que actualizar algunos drivers, pero se queda la PC congelada cuando va hacr la actualizacion de dichos driver, para constancia les envio fotos del problema.
once power button pressed to start up...
...my PC makes three long, low tones followed by four shorter, higher tones. Plus it is very slow to start.
Any help gratefully received
Thank you
Tom
Any help gratefully received
Thank you
Tom
TaskManager.exe
I received a high-use resource message that one program was using a significant amount of memory resources, and it was identified as TaskManager.exe. Should I and is there a way to shut this down?
Interfearing with VPN
Hi,
Whenever my VPN connects to the internet, the Auslogics Bootspeed notifies, an attempt to change the DNS was diplayed. Well if I connect via VPN it will change the DNS. My question is does your softwere blocks the attempted change of DNS or it's only a notification. If it blocks then how do I dissable it as I want my VPN more than your software.
Thank you,
Winston
Whenever my VPN connects to the internet, the Auslogics Bootspeed notifies, an attempt to change the DNS was diplayed. Well if I connect via VPN it will change the DNS. My question is does your softwere blocks the attempted change of DNS or it's only a notification. If it blocks then how do I dissable it as I want my VPN more than your software.
Thank you,
Winston
I have windows installed on my SSD and HDD so how do I transfer data from one installation to the other without cloning
So I got and installation of windows on my SSD and HDD, but now I want to shift my files from HDD to SSD installation and then delete windows from HDD, but I don't want to clone(unless it doesn't clone windows installation and other files that I already installed on the SSD) my current installation(HDD) as it was pirated while the other one is legal, and by data I mean everything from text files to programs I installed, so I just want the user data and programs I installed to be shifted to my SSD without deleting windows from SSD and cloning the HDD one. Pls Help as quickly as possible,
Windows Defender Disable Remove
I WOULD YOUR HELP REGARDING REMOVE WINDOWS DEFENDER BECAUSE MY LAPTOP GOES VERY SLOW WHEN IS ON
THANK YOU
SAKLIS DIMITRIS
THANK YOU
SAKLIS DIMITRIS
Boot Speed, or Restart Speed
The main reason I bought this program was to help increase my boot speed. it's 4 minutes and 15 seconds. After running the Pro version of the program the boot speed is still the same. I deselected a bunch of items in the startup screen and it's still the same. I don't understand why it takes so long. Please help.I'm not sure if this is a windows question or a software question. thanks. Paul
Disk Defrag pro not showing new drive
I have just installed a new external hard drive (G) and the drive is not displayed in the list of disks in Auslogics Disk defrag 10. Could you please advise me how to correct the issue.
Sorry but I did not know which sub category was appropriate
AusLogic # BoostSpeed users
Where does display state the maximum number of user available with the product key assigned; and where does it show how many have been assigned; and where do they give the user name of the assigned
Start up file deleted
How can I restore my file after auslogic Boostspeed deleted the program file? Meantime, i cant open a program.
Is my subscription good for another device?
How many devices are covered by my subscription?
I have another laptop that I want this service on.
Guy Veasey
I have another laptop that I want this service on.
Guy Veasey
Disk Defrag
HI,i have noticed a few times now that when all disks are checked my C; SSD disk gets stuck at around 71% and doesnt complete.All other SSD: ( D; E; ) finish. Even then when i stop the optimisation and uncheck disks E and D then try running just C; it still gets stuck. The only way then is to restart my PC and run optimisation only on C; it finishes the run. Its only a small hick up but i thought it best to make you aware of this/
Fehlermeldung
Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Boostspeed Benachrichtigungsanzeigen
Hallo wertes Auslogics-Boostspeed-Team,
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
False alarms
I have this problem for many years now and I cannot find out what’s happening. When I start Windows, I hear a number of times the ding dong sound of hardware that is connecting and disconnecting. When I look into the Control Panel > Devices and printers, I see an icon showing up and disappearing. The label says: Unknown USB device (Device Descriptor Request failed). I checked all hardware connected to the PC more than once and for each piece of hardware there’s is an icon in the Control Panel. So I really don’t know to which piece of hardware this additional icon is related. After about 20 ding dongs, the sounds stops by itself. Sometimes this issue has gone for some time, but it returns as suddenly as it has been gone.
Any comment on this issue would be appreciated.
I made a .nfo file, but I cannot attach this file to this request form.
Any comment on this issue would be appreciated.
I made a .nfo file, but I cannot attach this file to this request form.
Rregister Editor
Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
Where to find the Optimize Tab
In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
LOST APPS
I got myself in a bind and I resorted to installing a backup file.
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
won't post
Good Day!
I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!
Let me just say thank you in advance! I appreciate the offer of help!
djmes
I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!
Let me just say thank you in advance! I appreciate the offer of help!
djmes
transfert photos depuis icloud
hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
Removal of leftover files and registry entries after uninstall. (crashplan)
I need to remove leftover files and settings of uninstalled software, in particular I need to remove crashplan pro in order to have a clean setup and do a new installation without any registry entries or old files.
Driver Updater
Driver Updater won't scan. Says its blocked by Firewall. McAfee doesn't show that it's quareentined or blocked.
System rebooting by itself when launch game
System rebooting by itself when launch game I tried to clean hardware using some methods but i think my problem is with my RTX 3090 problems I think it's overheating
Fading icon
Hello and thank you for your hardwork
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
Diagnostic Policy Service Cannot Start.
Diagnostic Policy Service Cannot Start. Access is Denied – Error 5 Fix
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7