1899 questions

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1550 views
May 06, 2020 at 04:31 PM

defrag ssd

you product wants to defrag and tweak my ssd is this safe?

1302 views
May 06, 2020 at 09:29 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1518 views
May 06, 2020 at 05:50 AM

Démarrage anormal

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
1264 views
May 03, 2020 at 04:35 PM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

1471 views
Apr 29, 2020 at 10:41 PM

Отвалился BlueTooth

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

1540 views
Apr 29, 2020 at 06:00 AM

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

1368 views
Apr 29, 2020 at 01:50 AM

Disco duro se encuentra al 100%

Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?

1350 views
Apr 28, 2020 at 02:59 AM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

1291 views
Apr 27, 2020 at 08:51 AM

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

1371 views
Apr 27, 2020 at 08:32 AM

Malware

How can I minimize the picking up of malware by using your toolkit?

1821 views
Apr 25, 2020 at 10:50 PM

Temperature

I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?

1500 views
Apr 22, 2020 at 04:00 PM

ms-resource: ProductName を取り除きたい

Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに

"ms-resource: ProductName"  を取り除きたい


このアプリは開かず、アンインストールもできない

2981 views
Apr 22, 2020 at 01:56 PM

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

1419 views
Apr 20, 2020 at 08:19 AM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

1751 views
Apr 19, 2020 at 06:26 AM

Windows 10 logon password via Auslogics

Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager

Content hidden to protect privacy

1594 views
Apr 18, 2020 at 05:41 PM

Повышенное потребление ресурсов

Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?

1080 views
Apr 18, 2020 at 05:17 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1513 views
Apr 18, 2020 at 10:31 AM

System Restore

Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem

1496 views
Apr 16, 2020 at 06:59 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

1471 views
Apr 16, 2020 at 08:42 AM

Is my subscription good for another device?

How many devices are covered by my subscription?

I have another laptop that I want this service on.

Guy Veasey

597 views
Apr 20, 2023 at 12:49 AM

Boostspeed Benachrichtigungsanzeigen

Hallo wertes Auslogics-Boostspeed-Team,

ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.

Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?


Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
597 views
Oct 12, 2023 at 11:02 AM

Disk Defrag

HI,i have noticed a few times now that when all disks are checked my C; SSD disk gets stuck at around 71% and doesnt complete.All other SSD: ( D; E; ) finish. Even then when i stop the optimisation and uncheck disks E and D then try running just C; it still gets stuck. The only way then is to restart my PC and run optimisation only on C; it finishes the run. Its only a small hick up but i thought it best to make you aware of this/
597 views
Jul 13, 2023 at 07:26 PM

Fehlermeldung

Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:

failed download failure

was verhindert die Aktuallisierung bei dem Programm.

Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro

mfg Klaus Schwabe
597 views
Aug 31, 2023 at 10:32 PM

DSN resolution failing

I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.

could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?

not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
596 views
Oct 16, 2023 at 12:48 PM

False alarms

I have this problem for many years now and I cannot find out what’s happening. When I start Windows, I hear a number of times the ding dong sound of hardware that is connecting and disconnecting. When I look into the Control Panel > Devices and printers, I see an icon showing up and disappearing. The label says: Unknown USB device (Device Descriptor Request failed). I checked all hardware connected to the PC more than once and for each piece of hardware there’s is an icon in the Control Panel. So I really don’t know to which piece of hardware this additional icon is related. After about 20 ding dongs, the sounds stops by itself. Sometimes this issue has gone for some time, but it returns as suddenly as it has been gone.
Any comment on this issue would be appreciated.

I made a .nfo file, but I cannot attach this file to this request form.
596 views
Apr 27, 2022 at 08:29 PM

Rregister Editor

Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
595 views
Jul 17, 2023 at 01:11 PM

deleted files

If I use duplicate file finder and click delete is the original also deleted?
595 views
Apr 03, 2024 at 02:34 PM

lost files

how do I get files back that were mysteriously lost
595 views
Mar 22, 2023 at 07:47 PM

パソコンが熱い

  パソコンの動作が遅く、動作音も大きくなり、パソコンの排気がとても熱くなって心配です。デフラグやクリーンアップすると少しの間静かになります。問題ないのでしょうか。また、どうすればいいですか?パソコン自体は5年目です。
594 views
Sep 06, 2022 at 12:33 AM

Where to find the Optimize Tab

In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
594 views
Apr 04, 2023 at 04:14 AM

LOST APPS

I got myself in a bind and I resorted to installing a backup file.
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.

Cheers

Bill Wacher
593 views
Aug 05, 2023 at 04:16 AM

won't post

Good Day!
I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!

Let me just say thank you in advance! I appreciate the offer of help!

djmes
592 views
Nov 13, 2022 at 07:35 PM

transfert photos depuis icloud

hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different

extension heic
et je n'arrive plus a les lire


please i want to have a french answer ty
591 views
Oct 16, 2023 at 06:39 AM

Removal of leftover files and registry entries after uninstall. (crashplan)

I need to remove leftover files and settings of uninstalled software, in particular I need to remove crashplan pro in order to have a clean setup and do a new installation without any registry entries or old files.

591 views
Apr 18, 2022 at 06:26 PM

Driver Updater

Driver Updater won't scan. Says its blocked by Firewall. McAfee doesn't show that it's quareentined or blocked.
589 views
Oct 09, 2023 at 02:21 PM

System rebooting by itself when launch game

System rebooting by itself when launch game I tried to clean hardware using some methods but i think my problem is with my RTX 3090 problems I think it's overheating
589 views
May 14, 2023 at 02:53 PM

Fading icon

Hello and thank you for your hardwork
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
587 views
Sep 28, 2023 at 07:32 PM

RUNDLL32

What catogory do I run to resolve RUNDll32 not working?
587 views
Nov 12, 2022 at 04:34 PM

Diagnostic Policy Service Cannot Start.

Diagnostic Policy Service Cannot Start. Access is Denied – Error 5 Fix


587 views
Nov 02, 2023 at 09:42 PM