1859 questions

System Reserved Partition

As far as I can tell I lost my SRP after a Windows 10 v20H2 update. How do I get it back or do I not need it? I went back to version 2004 and still can't find it.
1558 views
Sep 01, 2020 at 08:30 AM

Как устранить неисправность

Операционная система не загружается. После включения компьютера загрузка операционной системы прекращается, колёсико всё время крутится и крутится. Такое положение может продолжаться и 1 час, и 2 часа и 4 часа. Больше не пробовал. Иногра, но очень редко, после неоднократного включения-выключения компьютера он вдруг после включения через 11-13 секунд, загружает операционную сисчтему, как это происходило после его покупки в магазине,
Вопрос:. В чём заключается неисправность и как эту неисправность устранить?

1090 views
Aug 31, 2020 at 02:39 PM

Old windows

Windows 10 unfortunately doesent delete windows.old when doing a clean re-install.
is there a way to delete this and clear this space?
939 views
Aug 31, 2020 at 03:07 AM

msconfig

how to change selective startup to normal in msconfig?
973 views
Aug 30, 2020 at 03:15 AM

Correct pagefile number for 4gb ram ddr2?

i am having some issues with pagefile's maximum and minimum numbers. when i set the numbers to minimum= 3583 and maximum= 6184. my game, GTA V, has some graphical bugs. like the textures dissapear when im driving to fast. and the game after a time playing it crashes. so whats the ideal number to put in the pagefile for 4gb ram ddr2?
my specs:

windows 8.1 pro
amd phenom quadcore 9600 2.30 ghz
4gb ram ddr2
nvidia gt 710 2gb vram

i also have it set to minimum and maximum 6184 because its the currently alocated number in the bottom of the pagefile window
986 views
Aug 29, 2020 at 01:48 AM

Brightness control not working

I've got a Lenovo Y50 laptop. Display brightness is usually controlled by Fn + up arrow and Fn +ndown arrow. Brightness controls are not working. Not sure when this started happening.
1285 views
Aug 28, 2020 at 02:59 AM

My system repair data

Dear Auslogics,

I bought your Boostspeed 11 and let it have its way. But now all my system repair data are gone.

???

Regards,

J.P. (Jan) Clifford
1196 views
Aug 26, 2020 at 09:00 PM

Malware

can auslogics check for malware?
C:\Program Files\Supremo Tribunal Federal\Sistema Operacional Microsoft® Windows®\ subfolder

this just showed up in my startup today - never saw it before and from what I read can be OK or can be an infection

I need to know if it is OK to keep it or try to remove it

1217 views
Aug 26, 2020 at 02:08 PM

Discord failed installation

hello there, im facing a problem with installing discord, says something about checking the setup logs or something to contact author. i watched your video on how to fix that problem and tried both methods but they dont work. Is there anyway i can get help? Thank you. Btw i just put access because there was no discord subcategory, the problem isnt with access its with discord.

1568 views
Aug 26, 2020 at 01:20 PM

logiciels office

Les logiciels office ne se lancent plus
1213 views
Aug 25, 2020 at 03:08 PM

My Windows 10 Pro version asks for activation

Hello,
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
1176 views
Aug 23, 2020 at 11:40 PM

Пропали значки из трея

Использовал вашу программу после чего пропали значки из трея, после сделанного я решил удалить программу но значки не вернулись, а с переустановкой пропали откаты в программе, пожалуйста помогите мне с этой проблемой
1231 views
Aug 23, 2020 at 02:48 PM

pendrive got corrupted when i applied free up space to it by auslogics boostspeed

two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....

and that's how my pendrive got corrupted by performing an operation "free space wiper"

1054 views
Aug 23, 2020 at 01:20 PM

Two issues:Text freezes and unsatisfactory settings

ever since installing this program and running it i'm very unsatified. Cannot type properly - text freezes every few letters and have to click the page with mouse to continue.
Also - despite my choice of most comfertable writing thumbnail - set my screen too bright with choppy text.

Please advise

Jessica
1297 views
Aug 23, 2020 at 09:45 AM

Sleep Mode

I have Acer Aspire 5750 G laptop, pritty old one, with win10 latest. It works well but when it goes to sleep mode everything gets slow (all applications, movement of mouse, all system), I've been waited for a long time to give it a time to wake up but nothing. Only solutions is to restart it, and after that it is in normal working mode. Before latest win10 update (2004) it was OK.
I tried so many things to do (everything throu Auslogics, update driver, clean up, registry, defrag ...), but nothing.
Is there any advice from you?
1103 views
Aug 22, 2020 at 04:22 PM

toggle "attempt to change DNS" notification.

This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!

1192 views
Aug 20, 2020 at 06:34 PM

NON SI APRE PIU' IMPOSTAZIONI IN WINDOWS

DOPO AVER INSTALLATO AUTOLOGISTICS , IN WINDOWS NON MI SI APRONO PIU' LE IMPOSTAZIONI DI SISTEMA E WINDOWS UPDATE ... CHIEDO CORTESEMENTE UNA RISPOSTA .... GRAZIE 1000
1448 views
Aug 19, 2020 at 04:51 PM

Disc doctor

Disc doctor advices that I have a disc errpr pn my main drive. How do I rectify this

1137 views
Aug 19, 2020 at 06:52 AM

WiFi keeps disconnecting

For about 9 months now often when I click to go from one webpage or website to another my Wi-Fi disconnects. I either must reconnect via the Internet icon or when I run the Windows Network Diagnostics it always tells me that "The default gateway is not available" and it fixes it. I have run all sorts of 'FIXES' found on the internet but still not fixed.

Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
1184 views
Aug 18, 2020 at 02:08 PM

Is your softwares a virus?

Why my Kaspersky anti virus program treats your softwares as a virus and shows me constantly warnings that I am in risk?
I do not have files to show you th problem because I unisntalled all your programs until I am sure that I am not in risk indeed.

Best regards,

Juarez Almeida.

968 views
Aug 17, 2020 at 04:19 PM

My Gmail account in Windows mail won't send.

Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
George

1440 views
Dec 25, 2019 at 07:43 AM

Installation error message

Now and then when I try to install something I get the error message in the sample pop up. I need this sorting out as I have tried many things to get rid of it to no avail. I do not even know what it is asking for. It claims is on another disk does it mean disk or harddrive? I am installing things on an extension drive as my C: is full. are there files on C: that it needs to install and maybe that is why it is asking me. Can I duplicate those files so that it can use the extension drive?
This message prevents me from installing certain programs that I need so like I said I need the relevant files that it is asking me for.
1439 views
Jul 07, 2020 at 04:16 AM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

USB flash drive not recognized

How do I get W10 to see my USB flash drive?

1435 views
May 12, 2020 at 08:28 AM

booster 11 for windows 10

hi,
i downloaded the booster 11 for windows 10.
the booster 11 shows as 32 bit. ideally i need a booster 11 64 bit.
i am using windows 10 on a 64bit system.

do i have to reinstall for booster 11 for 64 bit. if so, can you send me the link as it just auto-downloads the 32bit.

another questions is i have anti-malaware and everytime i shut down the computer and restart the next day, i have to reinstall all over again.
is it because of my anti-virus norton that i use? can you assist me on that as well.
thanks/regards/tony

1434 views
May 23, 2020 at 09:39 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1433 views
May 06, 2020 at 05:50 AM

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1432 views
May 06, 2020 at 04:31 PM

аааа

медленный

1431 views
Jun 28, 2020 at 10:18 AM

Driver Updater

When I launch Driver Updater it seems to hang when connecting to the cloud. Should I reinstall it or is there some other issue?

1431 views
Jan 03, 2021 at 09:19 PM

モニター画面が操作中に何回も、すぐ真っ暗になります。

本日より、スクリーンセーバーのセッティングと違う動きで画面が1分位で真っ暗になります。マウスを動かしたり、エンターキーを押すと元の画面に戻ります。
なにかこのソフトがよかれと思ってそういう動作をしているのかもしれないと思いメールを書きました。
余りに頻繁に画面が暗くなるので、今もzoomで会議をしておりましたが、何回もマウス、エンターキーの操作をしなければならなかったので煩わしく思い、解除できればと思いメールしました。

因みに、電源操作も全て解除し、なしの状態にしております。

以上宜しくお願いします。

佐藤光則  hsny7743@uranus.dti.ne.jp
1430 views
Jun 24, 2021 at 07:08 AM

Не запускается Aslogics BoostSpeed

Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.

1430 views
Nov 19, 2020 at 11:45 AM

Driver Updater

I am unable to install my copy of Driver Updater because McAfee considers it a virus. What should I do?

1429 views
Mar 28, 2020 at 01:49 PM

Avira keeps deleting Boost Speed and all Auslogic *.exe files as a PUA.

Hi there,

I have been on mail with Mr. Alex Bratton of your Support Team. I am a registered purchaser of the Auslogics Boost Speed software, and I have had immense trouble with installing and running it as my Avira antivirus software keeps deleting all Auslogics *.exe files as PUAs having the virus "Auslogics.o" as reported in the Avira quarantine log.

Alex had suggested that I put Auslogics on the Avira scanner EXCEPTIONS list - which I did, but to no avail. Do they have an axe to grind with your software ? I have even sent an e-mail to Avira support telling them hat Auslogics software originates from a Company having its website www.auslogics.com, and to definately check both the antecedents of the Auslogics Company and their software as genuine and not PUA - and thus I requested them to reconsider the action against yyour software exe files. Theu have not yet got back to me regarding this.

I have so far installed and re-installed your Boost Speed software over 5 times since its purchase on 28.08.2019, and each time Avira deletes the *.exe files as well as the entire Auslogics folder in the C:\Program Files (x86) path, every time I shut-down and boot-up my laptop. And all this after making Auslogics an "exception" in the antivirus and real-time protection scanner settings of the Avira software .

Could your team please have a word with the Avira development team to resolve the vixing issue, as I am most certain there will be many othercustomers worldwide using both the Avira and the Aulogics softwares and facing these issues ?

I have actually reached a point of near frustration, as both the Avira and Auslogics softwares do a great job individually, but DO NOT LIKE EACH OTHER (cannot function together) as seen on my laptop !!

Kindly update me on a solution to this problem.

Many thanks,

Savio da Rocha Lobo,

Content hidden to protect privacy

1428 views
Sep 01, 2019 at 05:05 PM

fed up with lack of space on C Drive...what am I doing wrong?

I am trying to do everything right. Vigilance, using auslogics and bitreplica, as well as duplicate file finder, however almost every day, my hardrive fills up, and I can barely get a file to open, due to lack of memory. I have done everything that I know, to try to have all files saved to onedrive, or icloud, but it doesn't seem to make any difference! The computer jams up, because it has reached maximum capacity! Why does this happen, when I am saving files to onedrive (cloud storage). I'm really about ready to chuck this new laptop into the rubbish bin. But.....all available 'new' laptops appear to only have minimal hard drive space. The retailer told me to save my files to the cloud, which is what I am doing, so why does the C drive continually fill up. I move stuff to an external hard drive, in an attempt to free up space, but as soon as bitreplica runs, I'm back to square one. I'm so frustrated, as it takes several minutes just to open a word document. Please please please, can you give me some guidance / direction as to what it is that I am doing wrong. Regards, Kerry

1428 views
Aug 17, 2020 at 09:27 AM

My wireless driver is not working

This is the second time this has happened and it has something to do with this softwarre Auslogics 11 after a deep scan took place. But now I cant restore the driver because it seems to be blocked,
The diagnostic's say "Windows can not bind the IP protocol stack to the network."
This is with my wireless adapter and not with my LAN, But I need my wireless adapter asap. Yes I have tried reinstalling the driver and it says the same thing,

1425 views
Apr 15, 2020 at 03:02 PM

Auslogics Driver Updater 1.23.0.2

Уже не первый раз встроенный антивирус Windows 10 "ругается" на программу, после чего удаляет DriverUpdaterHelper.dll, выдаёт код ошибки 0х0000007Е, и просит переустановить программу. А сейчас при попытке загрузки сетапа с вашего сайте пишет, что она содержит вредоносную программу. Пожалуйста, подскажите, как мне решить данную проблему, чтобы на будущее я с ней не сталкивался? Форма техподдержки непосредственно по вашим программам не работает ни через Мозиллу, ни через Хром, сообщения не отправляются, поэтому пишу здесь. Пожалуйста, сбросьте мой счётчик бесплатных вопросов.
1424 views
Apr 02, 2020 at 01:36 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1423 views
Apr 18, 2020 at 10:31 AM

Компьютер тормозит и зависает

В некоторые моменты зависает компьютер, иногда зависает отдельные поля(рабочий стол, панель задач, меню Пуск).
Курсором мыши возможно передвигать, но с различными программами невозможно взаимодействовать, а некоторые попросту не отвечают. Открытие вкладок и поисковые запросы в браузере выполняются очень медленно, а при просмотре видео(на том же Youtube) долго загружается.
Сначало подумал на выход из строя процессора, т.к он не слишком уж новый, да и проблема мне показалась такого рода. Почистил и заменил термопасту процессор, на вид он в хорошем состоянии(без сколов и царапин). После этого пол дня все было нормально но потом все продолжилось.
Дальше я начал искать решение проблемы в интернете, чего я только не перепробывал, и выключение службы Центра обновления Windows, проверки на вирусы и мусорные файлы, чистил реестр, дефрагментировал диски( для этого скачал данную программу). Только после дефрагментации дисков компьютер работал без перебоев и зависаний день, но на следующий все по новой.
Уже незнаю в чем может быть проблема, единственное на что подаю подозрения так это жетский диск, но и то не факт что это верно

1423 views
Oct 27, 2020 at 09:03 AM

Restore

Can I ask you a question of restoring an image?

1423 views
Jul 29, 2020 at 04:16 PM

ウイルスバスタークラウドがアクセス不能になりました

AusulogicsBootspeed pro11を利用して色々スキャンを行っていたところ、表題のウイルスバスタークラウドのアプリが開かなくなりプロパーティを見たところ「同期保留」となっていました。結局本Bootspeedの適用個所をいろいろ外してみてやっとウイルスソフトは復帰した次第です。
このようなことを避けるために今後ウイルスバスターの稼働に影響を与えると思われるBootSpeedの設定項目の詳細について教えて下さい。

1423 views
Nov 24, 2020 at 02:38 AM