1859 questions
Cannot activate
I HAVE PAID FOR on 1/20/22, AND DOWNLOADED BOOST SPEED 12.2.0.0. AND REGISTERED WITH THE SUPPLIED KEY.
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
Not able to install an upgrade for Boostspeed 12.2.0.0
I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
The System Information report for my external backup hard drive above shows the following;
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Delete wrong user
After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
Windows refusing access as administrator
Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
Could not activated my license
I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
Program not registered
As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.
Thank you
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
Content hidden to protect privacy
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
Content hidden to protect privacy
THANK YOU
Aktivation not Possibel
Hi
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Content hidden to protect privacy
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー：
Auslogics BoostSpeed 12
Content hidden to protect privacy
stringa di ricerca
Buongiorno, ho eseguito una ricerca per stirnga e non ho ottenuto risultati, ho eseguito la stessa ricerca con regedit e sono uscite diverse voci di registro, come mai?
Cosa devo fare per ottenere questi risultati con la vostra app e per cancellarli senza cercarli e selezionarli uno ad uno con regedit?
Grazie.
Cosa devo fare per ottenere questi risultati con la vostra app e per cancellarli senza cercarli e selezionarli uno ad uno con regedit?
Grazie.
boostspeed
Pc still not operating smooth see no changes since using boost speed after two or three scans. maybe problem is windows or age of PC or Spectrum cable.
upgraging lost my registered status
Hi,
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
re windows 10 not updating from 1909 to 22H2.
Follow up on not being able to update to Windows 10 22H2 from 1909.
I have gone through all the suggestions. Update assistant ,Media creation tool,Update troubleshooter , resetting windows update components and still get the error: initiation failed during First-Boot phase at Migrate-Data.
USB bootable disk also did not succeed. I have disabled all periferals , ran fksdsk, restore health, checked that all drivers are up to date etc.. and still get the same error.
Error messages from windows logs : Error Essent 455 Loggin/Recovery. Error Security center 17 None. Error Application error 1000 Application crashing Events. Error Security-SPP 16385 None. These occur multiple times in the log file.
I also disabled Firewall and anti virus software, all to no avail.
Any idea what else I might try ?
I have gone through all the suggestions. Update assistant ,Media creation tool,Update troubleshooter , resetting windows update components and still get the error: initiation failed during First-Boot phase at Migrate-Data.
USB bootable disk also did not succeed. I have disabled all periferals , ran fksdsk, restore health, checked that all drivers are up to date etc.. and still get the same error.
Error messages from windows logs : Error Essent 455 Loggin/Recovery. Error Security center 17 None. Error Application error 1000 Application crashing Events. Error Security-SPP 16385 None. These occur multiple times in the log file.
I also disabled Firewall and anti virus software, all to no avail.
Any idea what else I might try ?
heute kein Zugang zum Abruf der Treiber-Daten
Gibt es ein technisches Problem beim Zugang zum Datenserver?
AUSLOGICS BOOT SPEED 12
Me gustaria saber si la version pro de este programa arregla los errores y archivos dañados del registro de windows 7 version 64 bits.
Espero su respuedta. aun estoy usando la version gratis de este programa.
Espero su respuedta. aun estoy usando la version gratis de este programa.
Fonction "rechercher dans" en haut à droite des fenêtres windows 10
la fonction de recherche est totalement inactive. On ne peut rien inscrire dans la case prévue.
Is it safe to delete this keys
Hi,
I tried to uninstall a software, but that doesn't seem to have gone well.
It is 4k video downloader.
Reinstalling doesn't work because I get the message that it is still there on my PC.
Now I have downloaded your software and when I search for keys of this 4k software, I get a list of almost 500 keys, see photo.
When I check, when I stand on it with the cursor, it all shows 4k.
Now my question is, is this safe to remove?
Thanks in advance for your cooperation.
Yours sincerely
John de Vries
Content hidden to protect privacy
Windows Update
This error code might help: (0x80004002).
Can you guys help? Tried everything. I can't seem to fix this.
Can you guys help? Tried everything. I can't seem to fix this.
Recover Data if possible
HP Laptop Pavilion, Win10, 1 Gig HD, i7 processor
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
DirectPlay issue
Every since I installed Auslogics driver updater I keep getting a message that I need to install directplay. Directplay won't install on my computer and if I choose to skip the installation the attached notification constantly comes up. Is Auslogics driver updater or Bootspeed calling for this outdated windows feature. If I uninstall driver updater I don't get that notification.
System Scan
Every time I run a system scan Boostspeed highlights the TCP/IP internet setting as needing attention. It then says it's resolved it. This occurs on every system scan run.
Any thoughts?
Any thoughts?
Set up your Computer
Each time I log in to Win 11 I am asked if I want to set up my computer.
Is there any way to removed this annoyance? The app doesn't appear in my list of installed apps.
Is there any way to removed this annoyance? The app doesn't appear in my list of installed apps.
Laptop freezes on and off
Lenovo laptop freezes on and off. I have few apps open at the same time and I wfh these days. so I logged onto VDI to connect to my workspace. Can you remote login and help.
Accessing NAS from the web
¿How do I access my Buffalo Link Station LS220DB from the web in a secure way?
Audio problem in Windows 11 Pro
How do I repair Windows 11 Pro sound issues with Auslogics BoostSpeed 13? Thanks!
MSEdge
Yesterday I ran Auslogics BoostSpeed 13 and it messed up my ability to get into MSEdge. It wasnt until late last night that I figured out what happened but I don't know how to fix it. After running the scan and after clicking on the repair/fix it button, a small screen pops us and asks me to close the following files. They are all msedge.exe (6 or more), but it didn't do that this time and has stopped me from being able to get in MicroSoft Edge. Has my copy of Auslogics BoostSpeed 13 been compromised, have I missed and update or is something else going on? Can you help e with this?
Ausllogics BoostSpeed 13 so difficult to open
Whenever I open Auslogics BoostSpeed to start it does not open , after some 5 mins and several times of tries it will open but is so slow to start to scan ??? After long wait no report on any problems why it did not start. Is this the normal speed of BoostSpeed 13 ???
Disappointed !!!
Disappointed !!!
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7