1897 questions
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
profile
i have windows 7 windows will log me on as temp profile unsted of administrater i googled this question and is sent me to your site says to download your registery cleaner run it and myproblem is solved but it didnt work please help
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
play game without lag
i am playing the game is heavy than 60gb so i have a question
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Since installing BoostSpeed and using the various tools, my computer Location function is no longer operable. In Settings, all options to switch location settings on are greyed out. I have follewed various YouTube suggestions to no avail. One Registry key the videos refer to I don't seem to have anymore, although I can't find it deleted in BoostSpeed bin. The key is:- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lfsvc\TriggerInfo
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Auslogics BoostSpeed が上手く使えません
マイクロソフトのエッジが邪魔をして、「稼働中のプログラムを全てを終了する」という機能が、突然使えなくなって、これを「手動で終了させよ」との文字が出ますが、出来ません。方法をご教示ください。また、何故、今までスムーズに出来ていたのに、何か私が間違えた設定をしてしまったのでしょうか?
внезапно стал плохой интернет
у меня был нормальный интернет всё было хорошо но на след день он просел до 100кб загрузка хотя на спидтесте он как был по 80мб так и остался и уже месяц он такой до сих пор а что делать я не знаю
Microsoft Edge and...
Win 10 problem: one update won't go through at all, Microsoft Edge opens a white page (personally) that I can't close normally, repair fails because the new install stops in the middle and never finishes. When Edge doesn't work, Outlook doesn't work, neither explorer, right-click on files doesn't work. Sometimes Edge works, but soon stops. I've tried everything, I don't know what to do. I don't use Edge, but apparently it blocks everything else for me.
PC not powering up
Hi,
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
Computer shuts down instead on going to sleep
My Computer shuts down instead on going to sleep. So I have to reboot to start up. Any help would be greatly appreciated.
Thank You
~Bill
Thank You
~Bill
Screen Saver Retreval
After a through clening I seem to have lost the screen saver prompt. The program is there and working - but it does not turn on when directed. How do I rescue the code that seems to be lost?
RunDLL Error Messge keeps popping up
I get this message everytime Boostspeed runs:
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
Change DNS
I am getting the message: 'Attempt to change DNS detected' Adapter: 'Wintun userspace tunnel #223'
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
Boostspeed 13 startup externalized to Windows desktop every boot
Everytime I boot up my Windows 10 laptop, Boostspeed 13 i set to startup in the settings, however on each boot, the Boostspeed dashboard is extranalized to the Windows desktop and always at the Registry Analysis tab.
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
RE: Need browser attachment advice
I Can't upload files to websites using any browser on my windows 10 home edition.
Can you help me?
USB
I had my PC repaired (for a new heat sink) and
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?
Recovery points
I have windows 11, and Auslogics, but cannot locate the reovery points in either.
How does one locate, to use if necessary?
How does one locate, to use if necessary?
Connects but stil doesn't work
Using Windows 11 Pro for Workstations. This is the first and only time I have used this OS so I don't have any experience troubleshooting it or point of reference. I have multiple devices, headphones and other devices that I know work for Bluetooth conectively purposes but otherwise but when I attempt to use them on this laptop, Windows tells me that the devices are connecting to the Bluetooth device I have selected but I get no sound. The only thing I can tell you that stands out and is related is that it tells me under System/Bluetooth that the device is connected but when I go to System/Sound, the connected device will not show under Sound/Outbut Device even though it shows connected under Bluetooth. I have considered reloading the OS from scrath (factory reset etc.) but really don't want to go through all that. So I am asking if you have any ideas otherwise.
auslogic
Hi, sorry for my poor Englsh... I started reg clean in auslogic but it made some changes in my pc that I did not like. How can I make a recovery?
Не понимаю куда девается память
Как мне посмотреть последнии скачанные данные и понять что у меня занимает память? Я буквально скачал расширение на гугл и у меня пропало два гигабайта, как это работает (винодоус 10)
the best way to free-up dwindling space on my diskdrive
My computer is slowing down more and more as I use up more diskdrive space. It is an older computer but has been super reliable until very recently. What is the most effective way to free-up hard drive space to allow Windows to be more efficient?
AUSLOGICS BOOT SPEED 12
Me gustaria saber si la version pro de este programa arregla los errores y archivos dañados del registro de windows 7 version 64 bits.
Espero su respuedta. aun estoy usando la version gratis de este programa.
Espero su respuedta. aun estoy usando la version gratis de este programa.
Win 10. Жесткий диск С
Привет! У меня резко , за одну ночь, с дика С пропало 25 Г. Не знаю что делать? Где искать проблему? Как это можно устранить? Не подвергая свой старый ноут переустановки ОС . Windows 10 HOME 22H2 19045.3693 .
Festplattenbereinigung rückgängig machen
Hallo,
am 10.05 wurde eine Festplattenbereinigung durchgeführt. Dabei wurden Datein gelöscht, die nicht gelöscht werden sollteb. Es fehlen ganze Ordner von Dateinen, die dadurch gelöscht wurden.
Wie kann dieser vorgang wieder rückgängig gemacht werden?
es handelt sich speziell umd den "Download" ordner auf der SSD Festplatte C
"Festplattenbereinigung: Heruntergeladene Dateien"
Alle Daten sind gelöscht undich benötige diese jedoch.
am 10.05 wurde eine Festplattenbereinigung durchgeführt. Dabei wurden Datein gelöscht, die nicht gelöscht werden sollteb. Es fehlen ganze Ordner von Dateinen, die dadurch gelöscht wurden.
Wie kann dieser vorgang wieder rückgängig gemacht werden?
es handelt sich speziell umd den "Download" ordner auf der SSD Festplatte C
"Festplattenbereinigung: Heruntergeladene Dateien"
Alle Daten sind gelöscht undich benötige diese jedoch.