1897 questions
Not able to install an upgrade for Boostspeed 12.2.0.0
I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
The System Information report for my external backup hard drive above shows the following;
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Delete wrong user
After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
Windows refusing access as administrator
Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
Could not activated my license
I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
Program not registered
As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.
Thank you
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
Content hidden to protect privacy
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
Content hidden to protect privacy
THANK YOU
Aktivation not Possibel
Hi
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Content hidden to protect privacy
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー：
Auslogics BoostSpeed 12
Content hidden to protect privacy
Pro version ?
Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
When trying to open Boostspeed, I am getting a popup stating Admin Blocked, go to an Administrator Integrator.exe. How can I clear this. If I re-download the basic program will open, when I type in my registration code, I'm sent to the store pager in AOL. Any help with this problem would be appreaciated.
Thank You
James Elder
Thank You
James Elder
внезапно стал плохой интернет
у меня был нормальный интернет всё было хорошо но на след день он просел до 100кб загрузка хотя на спидтесте он как был по 80мб так и остался и уже месяц он такой до сих пор а что делать я не знаю
Microsoft Edge and...
Win 10 problem: one update won't go through at all, Microsoft Edge opens a white page (personally) that I can't close normally, repair fails because the new install stops in the middle and never finishes. When Edge doesn't work, Outlook doesn't work, neither explorer, right-click on files doesn't work. Sometimes Edge works, but soon stops. I've tried everything, I don't know what to do. I don't use Edge, but apparently it blocks everything else for me.
PC not powering up
Hi,
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
Screen Saver Retreval
After a through clening I seem to have lost the screen saver prompt. The program is there and working - but it does not turn on when directed. How do I rescue the code that seems to be lost?
Computer shuts down instead on going to sleep
My Computer shuts down instead on going to sleep. So I have to reboot to start up. Any help would be greatly appreciated.
Thank You
~Bill
Thank You
~Bill
RunDLL Error Messge keeps popping up
I get this message everytime Boostspeed runs:
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
Recovery points
I have windows 11, and Auslogics, but cannot locate the reovery points in either.
How does one locate, to use if necessary?
How does one locate, to use if necessary?
Change DNS
I am getting the message: 'Attempt to change DNS detected' Adapter: 'Wintun userspace tunnel #223'
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
Connects but stil doesn't work
Using Windows 11 Pro for Workstations. This is the first and only time I have used this OS so I don't have any experience troubleshooting it or point of reference. I have multiple devices, headphones and other devices that I know work for Bluetooth conectively purposes but otherwise but when I attempt to use them on this laptop, Windows tells me that the devices are connecting to the Bluetooth device I have selected but I get no sound. The only thing I can tell you that stands out and is related is that it tells me under System/Bluetooth that the device is connected but when I go to System/Sound, the connected device will not show under Sound/Outbut Device even though it shows connected under Bluetooth. I have considered reloading the OS from scrath (factory reset etc.) but really don't want to go through all that. So I am asking if you have any ideas otherwise.
Boostspeed 13 startup externalized to Windows desktop every boot
Everytime I boot up my Windows 10 laptop, Boostspeed 13 i set to startup in the settings, however on each boot, the Boostspeed dashboard is extranalized to the Windows desktop and always at the Registry Analysis tab.
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
RE: Need browser attachment advice
I Can't upload files to websites using any browser on my windows 10 home edition.
Can you help me?
Не понимаю куда девается память
Как мне посмотреть последнии скачанные данные и понять что у меня занимает память? Я буквально скачал расширение на гугл и у меня пропало два гигабайта, как это работает (винодоус 10)
the best way to free-up dwindling space on my diskdrive
My computer is slowing down more and more as I use up more diskdrive space. It is an older computer but has been super reliable until very recently. What is the most effective way to free-up hard drive space to allow Windows to be more efficient?
AUSLOGICS BOOT SPEED 12
Me gustaria saber si la version pro de este programa arregla los errores y archivos dañados del registro de windows 7 version 64 bits.
Espero su respuedta. aun estoy usando la version gratis de este programa.
Espero su respuedta. aun estoy usando la version gratis de este programa.
Festplattenbereinigung rückgängig machen
Hallo,
am 10.05 wurde eine Festplattenbereinigung durchgeführt. Dabei wurden Datein gelöscht, die nicht gelöscht werden sollteb. Es fehlen ganze Ordner von Dateinen, die dadurch gelöscht wurden.
Wie kann dieser vorgang wieder rückgängig gemacht werden?
es handelt sich speziell umd den "Download" ordner auf der SSD Festplatte C
"Festplattenbereinigung: Heruntergeladene Dateien"
Alle Daten sind gelöscht undich benötige diese jedoch.
am 10.05 wurde eine Festplattenbereinigung durchgeführt. Dabei wurden Datein gelöscht, die nicht gelöscht werden sollteb. Es fehlen ganze Ordner von Dateinen, die dadurch gelöscht wurden.
Wie kann dieser vorgang wieder rückgängig gemacht werden?
es handelt sich speziell umd den "Download" ordner auf der SSD Festplatte C
"Festplattenbereinigung: Heruntergeladene Dateien"
Alle Daten sind gelöscht undich benötige diese jedoch.
Win 10. Жесткий диск С
Привет! У меня резко , за одну ночь, с дика С пропало 25 Г. Не знаю что делать? Где искать проблему? Как это можно устранить? Не подвергая свой старый ноут переустановки ОС . Windows 10 HOME 22H2 19045.3693 .
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7