Can you explain this? I downloaded the "free" defrag version last Saturday. It worked perfectly. On Sunday, I dod my usual maintenance, which includes defragmentation and back-up. Again, it worked perfectly. Today, when I was working I got a message indicating that a "defragment" was urgently needed. So I did yet another defragmentation. Then, for some reason which
I cannot explain, I downloaded the "pro" version of your product. Once it was completed, I did yet another defragmentation. To my surprise, there were files that required yet another defragmentation. My question is, why? Should I really trust that your software is actually doin what it is supposed to?
I downloaded some "pre-installed" software on my computer (i.e., just need to unzip the RAR file and the software will start working; no need to manually run the installation tool). If I no longer need this software, how do I completely uninstall it? I already deleted the "pre-installed" files, but I believe my computer still has some residual memory of it. I did a registry cleanup already...anything else I need to do?
I am a bit interested in above mentioned softwares compact feature. When running it it says that it can compress W10 with 1.9gb, windows inbuilt feature says only 0.5gb when running it. So how can your program compress so much more, 1.4gb more, that is a lot. Very!
I hope i will get a really detailed, extensive answer to my question, now when i have taken the trouble to download and install "Boostspeed" to get an answer.
So, how can your software compress so much more then Windows inbuilt feature? Why the difference? What does it really do?
I have a corrupted USB drive and now I can't access anything on it. I don't care about the files on it now. I would like to know is there a way to UN-corrupt it in your tools. I would just like to be able to use it. It's a pretty new flash drive - only used a few times. I think I killed it when I pulled it out after it gave me a warning. I wasn't able to get the warning to go away.
1. Any suggestions as to getting the external WiFi USB adaptor that I already bought to work?
2. or do I need to get/install some sort of PCI wifi adaptor/card?
Or what... help?
Slot3 / X1PCIEXP2: Available
Slot4 / X4PCIEXP: Available
Version: KBC Version 05.39
Serial Number: PESUC0ECY9Y2X0
Port Connector 0: Keyboard Port
Port Connector 1: Mouse Port
Port Connector 2: Serial Port 16550A Compatible
Port Connector 3: Serial Port 16550A Compatible
Port Connector 4: Video Port
Port Connector 5: Video Port
Port Connector 6: Video Port
Port Connector 7: Network Port
Port Connector 8: Audio Port
Port Connector 9: Audio Port
Port Connector 10: Audio Port
Port Connector 11: Audio Port
Port Connector 12: Audio Port
Port Connector 13: USB
Port Connector 14: USB
Port Connector 15: USB
Port Connector 16: USB
Port Connector 17: USB
Port Connector 18: USB
Port Connector 19: USB
Port Connector 20: USB
Port Connector 21: USB
Port Connector 22: USB
Port Connector 23: USB
Port Connector 24: 8251 Compatible
Port Connector 25: 8251 Compatible
Port Connector 26: 8251 Compatible
Port Connector 27: 8251 Compatible
Port Connector 28: 8251 Compatible
Port Connector 29: None
Port Connector 30: None
Port Connector 31: None
Port Connector 32: None
Port Connector 33: None
Port Connector 34: None
Port Connector 35: None
Port Connector 36: None
Port Connector 37: Keyboard Port
Slot1 / X16PCIEXP: In Use
Slot2 / X1PCIEXP1: In Use
Slot3 / X1PCIEXP2: Available
Slot4 / X4PCIEXP: Available
Name: N01 Ver. 02.47
Version: N01 Ver. 02.47
Copyright: HPQOEM - 0
Size: 16,384 KB
Добрый день. Вопрос один, может подскажите, как то можно без сторонего софта(в реестре может), ограничить право программам переключать фокус между окнами? Т.е. например какая-то программа в фоне запускает новое окно, и оно открывается по верх текущего(активного).
Ну грубо говоря программа обновлялась апдейтером, и по завершению обновления запустилась, таким образом переключив фокус на себя
Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?
Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps
If I have to restart, it takes 20 minutes or more to load completely. I have basically nothing in startup and can't figure out what is making this take so long. It's the same whether a restart or new start. The hard drive is only a little over half full with lots of pictures. Logically it has to be in either ASUS or windows (10). It's very frustrating and because it takes so long to load, I leave it running. For quite a few years I paid for a service that cleaned the system once a month and helped with any problem. I am no longer using it as it was expensive and even though I stressed the startup time issue, they never improved it.
You can see a lot about the machine, but it doesn't say it's an ASUS 15" laptop, purchased in September of 2014, model R510LAVS51 with core i5
I didn't know if you needed this, but I'd rather give you unnecessary information than have you come back to me.
thanks so much
i downloaded the booster 11 for windows 10.
the booster 11 shows as 32 bit. ideally i need a booster 11 64 bit.
i am using windows 10 on a 64bit system.
do i have to reinstall for booster 11 for 64 bit. if so, can you send me the link as it just auto-downloads the 32bit.
another questions is i have anti-malaware and everytime i shut down the computer and restart the next day, i have to reinstall all over again.
is it because of my anti-virus norton that i use? can you assist me on that as well.
When using AusLogics BoostSpeed of any version (from version 5 to the latest) in the Microsoft Windows 10 Enterprise 2016 LTSB operating system, the reflection of available networks in the system tray disappears when you click on the network icon (both Wi-Fi and local). As well as a keyboard input indicator. Moreover, when uninstalling AusLogics BoostSpeed, this problem is not resolved. Which eliminates the use of AusLogics BoostSpeed on laptops with this system. How can this be fixed?