1897 questions
установить андройд 13
мой пк не видит нокиа 503- андройд самостоятельно установить не могу.прошу установить андройд 13 на нокиа 503 через ноутбоок самсунг R540 ОН ПОДКЛЮЧЕН ПО КАБЕЛЮ USB.
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
wakeup problems
I dont turn off laptop at night. I run it with lid closed when in use.
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
Server use
Is Auslogics Registry Cleaner suitable for servers?
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
upgraging lost my registered status
Hi,
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
hard drive chattering all the time win 10 pro ?????
my hard drive keeps chattering windows 10 can you help??????
boostspeed tray icon
What is the little red dot that appears on your tray icon? When it appears, what does it mean? How do you get rid of the red dot?
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Power options gone
I have problems Closing the lid does not work. I set it to sleep or shut down neither of them worked.When I tried to find a solutions
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
HDD 100% in Task Manager
Здравствуйте.
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
frequent log offs
Windows 11 prro keeps logging me off. I have tried several fixes from internet, but nothing works. Pleassse help. Thank you, Charles
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
transfert photos depuis icloud
hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
Не работает веб-камера
После последней настройки, с помощью вашей программы у меня перестала работать веб-камера и микрофон в программе Zoom. Микрофон удалось включить путем рекомендации от Zoom разрешения доступа приложениям к микрофону. Но решения с включением веб-камеры нету. Как решить проблему?
AUTOMATION ERROR THE OBJECT INVOKED HAS DISCONNECTED FROM ITS CLIENTS RUN-TIME ERROR
PLEASE HELP!!!!!!! I INSTALLED A PROGRAM CALLED "QUANTUM RESONANCE MAGNETIC ANALYZER" ON COMPUTER EVERY THING INSTALLED FINE, IT CREATED A DESK ICON ETC... BUT WHEN I TRY TO OPEN THE PROGRAM UP THE MESSAGE IN THE SUBJECT ABOVE IS WHAT I KEEP GETTING. I TRIED EVERYTHING!!!!!!!!!!!!!!!! I RESTARTED THE COMPUTER, I DID THE SFL /SCANNOW THING, I DISABLED MY VIRUS PROTECTION, I UPDATED DRIVERS BUT NOTHING!!!!!!! IM TRULY AT A LOSS IM VERY FRUSTRATED BECAUSE I PAID OVER 100 DOLLARS FOR THE PROGRAM AND I CANT USE IT! SO CAN YOU PLEASE HELP? OR WILL I HAVE TO TRY TO SEND THE PROGRAM BACK? I HAVE HP COMPUTER WINDOWS 10 MICROSOFT THANK YOU! MY NAME IS KENNETH BINGHAM
Fonction "rechercher dans" en haut à droite des fenêtres windows 10
la fonction de recherche est totalement inactive. On ne peut rien inscrire dans la case prévue.
Критическая
критическая ошибка Web Camsc-13HDL 11939NUSB\ViD_2232&...... Ошибка пользователя Appication Error
Fortnite
I have pretty good fps in fortnite but constant fps drops and stutters, I tried everything i found on the internet but seems like nothing works
Boostspeed Benachrichtigungsanzeigen
Hallo wertes Auslogics-Boostspeed-Team,
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
Driver Updater
Driver Updater won't scan. Says its blocked by Firewall. McAfee doesn't show that it's quareentined or blocked.
mcafee popouts stupid
how can disable or uninstall mcafee that seems to have been install by ms in windows10?
Add Folder (PIN) to Quick Access Not Working
I log into my laptop as local user ACS_LLC but when logged in it shows my email as mikewruth@gmail.com
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
cleanup of the registry
how to eliminate all references to the installation of a software from the Windows registry, in order to completely clean the installation files still present in the system and which are not eliminated by uninstalling that program
Fake scan
When I log into a search engine ( Google or Bing) the home page comes up. If I search for anything like Gmail or anything else it says "connection is not possible". It appears that a virus is diverting the search. The security software is picking up that it is diverting to p.f.360.cn/pollmessage. I can delete the unauthorised enteries but cannot get rid of the virus so it keeps happening. Does your service get rid of this fakescan.?
Проблема
Здравствуйте почему Ауслоджик удаляет установленные обновления и препятствует их загрузке.Можно ли востоновить установленные обновления.
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
BUENOS DIAS
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
Drivers
The same drivers keeps coming up in the dianostics:
Here's a snapshot of the drivers.
Could someone tell why this is happening?
Here's a snapshot of the drivers.
Could someone tell why this is happening?
System Events Notification Service
I have been trying to fix an issue for 60 days now and I decided to purchase your software. At this time, I hope that I have purchased the correct program? My issue occurred when I decided to switch from Panda Dome anti-virus to Bitdefender (BD). During the installation, I got a prompt that stated for me to remove my Malwarebytes AV, which I did. However, BD gave me no notice about my Hitman Pro.Alert AV program. After I had installed BD, a few day later, (SEP 24), I ran a Hitman Pro.Alert scan. It found one item, a suspicous ".dll file" and asked if I wanted to quarantine or delete? To keep this short, I used the quarantine option, because if there were any issues, I could just remove the quarantine. Well, yes, there were immediate problems. My tool bar display changed and I found out quickly that I could not move pictures or files from (for example) Downloads to My Documents. It also affected my ability to use my graphic art software, such as COREL. There's a lot more to this and I am very disappointed with Sophos, who bought the rights to Hitman Pro and Hitman Pro.Alert. Bottom line, I was not able to restore this "quarantined .dll file."
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
Program language
First of all, I wish you a good day.
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
Se requiere ver en el administrador de dispositivos de windows 10 el icono de bluetooth
no se activa el icono en el administrador de dispositivos de window 10 para el bluetooth, por lo que no puedo emparejar ningun dispositivo de este tipo mediante bluetooth
sCAN wINDOWS INSTALLATION ON OTHER dISK
I have lost the central vision in both my eyes and am in South America for 3 months visiting my kids.
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
RECOVERY OF WIPED IPHONE 14 PRO (NO BACK UP)
Hello, I have an iPhone 14 pro and by accident, I remotely wiped the phone trough "find my app". My question for you is whether this software can recover the extremely valuable data from the phone or any other available software you suggest? The phone is password-locked as lost and hasn't been switched on since the wipe happened.
Looking forward to hearing from you.
Best wishes
Nikola
Looking forward to hearing from you.
Best wishes
Nikola