1897 questions
外付けHDDのデーター復元
Auslogics bootSpeed 12のマイタスクの項目を処理したら、外付けHDDのデーターが消去されてしまいました。あまり画面を見ず、いいかげんに処理してしまいました。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:¥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか???
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:¥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか???
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
Slow Word response
I am having problems with Windows Word and Excvel !
I keep getting a message ' not responding' - when loading both Word and Excel - then after about 30 seconds it loads ?!
I have tried all sorts of published ways to correct this problem.
Is their a simple way to stop this annoying problem.
Thank you in advance
Chris Morley
I keep getting a message ' not responding' - when loading both Word and Excel - then after about 30 seconds it loads ?!
I have tried all sorts of published ways to correct this problem.
Is their a simple way to stop this annoying problem.
Thank you in advance
Chris Morley
Caps lock key not working or lighting up aslo volume keys are a bit touch and go as to if they going to work.
Caps lock key not working or lighting up aslo volume keys are a bit touch and go as to if they going to work. Any help or on getting these working would be much appreciated.
ошибки в дисках C, D
Здравствуйте! Почему программа находит ошибки в дисках, но не указывает и не исправляет? Спасибо
Partition management
I want to change the partitions on an SSD that i use for instant backup. I was hoping Boostspeed had this functionality.
If it exists, please point me to it.
Thanks
Ed
If it exists, please point me to it.
Thanks
Ed
Fix Broken Shortcuts
How does one fix/repair broken shortcuts. Auslogics gets hung up when using the Stability function.
Auslogics Boostspeed 12 problem
When I try to use the Boostspeed 12 "Maintain" tab and do a SCAN, I get a message popping up stating that it is "checking fragmentation on my F: Drive.
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
Long Boot time and black screen while booting
I have a ACER Nitro 5 laptop (windows 10 home original), mainly for entry level gaming. I am using laptop/desktop from last 12 years and I have moderate knoweldge on S/w issues, how to keep the laptop fast (by defragmenting, registry cleaning etc.). Recently I am facing Boot issues thats getting frustrating. Initially it started with long booting time, it was taking 7-10 minutes to reach to user account (Pin), and during that time the CPU and GPU fan speed was getting super fast (like during heavy usage).
Now from last couple of days, once I switch the laptop on, no display is coming, its just a black screen. However, CPU light was on, Key-board backlit was on and fan was rotating, but no display. If I wait the also nothing happening. Every time I need to force shut down it (by long pressing) and then if I restart again, its getting started properly.
Not sure what's the issue. I have checked prgrams that starts while booting, no issue there. No external device was attaching with my laptop while booting. stopped windown fast boot service also. But no progress.
Please suggest. can it be my HDD (1 TB I have) getting damaged? suggest if any other reason might be there.
Now from last couple of days, once I switch the laptop on, no display is coming, its just a black screen. However, CPU light was on, Key-board backlit was on and fan was rotating, but no display. If I wait the also nothing happening. Every time I need to force shut down it (by long pressing) and then if I restart again, its getting started properly.
Not sure what's the issue. I have checked prgrams that starts while booting, no issue there. No external device was attaching with my laptop while booting. stopped windown fast boot service also. But no progress.
Please suggest. can it be my HDD (1 TB I have) getting damaged? suggest if any other reason might be there.
Task Manager
Hi. I keep getting a report from Auslogics that a "High System Resources aare deteded". Clicking to see more takes me to the tak manager - but I have nno idea which of the dozens of running programss aare essential/nexcessary/vital and which are causing the problem. Can youo give me some guidance?
Donald
Donald
Notifacations
Can we stop the nag notifacations?
I do not need constant reminders that I have 3 questions, now 2. Stop it.
I do not need constant reminders that I have 3 questions, now 2. Stop it.
No photo thumbnails
All my picture files used to disply thumbnails, now just icons.
How do I restore?
How do I restore?
Display issues
I had some security issues and a professional took control of my computer to fix the issues. Now all of my normal icons are much smaller than before. I can change the sixe of text in Word and Firefox, but I don't know how to change the other icon and display sizes.
Computer freezes for 5 - 6 seconds every 2 - 3 minutes, maybe less.
Hi there,
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
Очистка диска
Как и что лучше всего почистить системный диск. Уже занято более 100ГБ. Все документы/временные файлы/загрузки уже перенесены с диска.
windows 10
Hi, when cleaning up windows 10 by using boostspeed 12, it deletes all my downloaded files and videos ! how to resolve or avoid this ??? Thanks in advance
L Lantveld
L Lantveld
ресурсы
Появляется окно с текстом:выявлено высокое потребление ресурсов, может привести к замедлению работы компьютера. Что делать?
Add Folder (PIN) to Quick Access Not Working
I log into my laptop as local user ACS_LLC but when logged in it shows my email as mikewruth@gmail.com
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
cleanup of the registry
how to eliminate all references to the installation of a software from the Windows registry, in order to completely clean the installation files still present in the system and which are not eliminated by uninstalling that program
Fake scan
When I log into a search engine ( Google or Bing) the home page comes up. If I search for anything like Gmail or anything else it says "connection is not possible". It appears that a virus is diverting the search. The security software is picking up that it is diverting to p.f.360.cn/pollmessage. I can delete the unauthorised enteries but cannot get rid of the virus so it keeps happening. Does your service get rid of this fakescan.?
Проблема
Здравствуйте почему Ауслоджик удаляет установленные обновления и препятствует их загрузке.Можно ли востоновить установленные обновления.
Drivers
The same drivers keeps coming up in the dianostics:
Here's a snapshot of the drivers.
Could someone tell why this is happening?
Here's a snapshot of the drivers.
Could someone tell why this is happening?
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
BUENOS DIAS
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
System Events Notification Service
I have been trying to fix an issue for 60 days now and I decided to purchase your software. At this time, I hope that I have purchased the correct program? My issue occurred when I decided to switch from Panda Dome anti-virus to Bitdefender (BD). During the installation, I got a prompt that stated for me to remove my Malwarebytes AV, which I did. However, BD gave me no notice about my Hitman Pro.Alert AV program. After I had installed BD, a few day later, (SEP 24), I ran a Hitman Pro.Alert scan. It found one item, a suspicous ".dll file" and asked if I wanted to quarantine or delete? To keep this short, I used the quarantine option, because if there were any issues, I could just remove the quarantine. Well, yes, there were immediate problems. My tool bar display changed and I found out quickly that I could not move pictures or files from (for example) Downloads to My Documents. It also affected my ability to use my graphic art software, such as COREL. There's a lot more to this and I am very disappointed with Sophos, who bought the rights to Hitman Pro and Hitman Pro.Alert. Bottom line, I was not able to restore this "quarantined .dll file."
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
Program language
First of all, I wish you a good day.
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
RECOVERY OF WIPED IPHONE 14 PRO (NO BACK UP)
Hello, I have an iPhone 14 pro and by accident, I remotely wiped the phone trough "find my app". My question for you is whether this software can recover the extremely valuable data from the phone or any other available software you suggest? The phone is password-locked as lost and hasn't been switched on since the wipe happened.
Looking forward to hearing from you.
Best wishes
Nikola
Looking forward to hearing from you.
Best wishes
Nikola
Se requiere ver en el administrador de dispositivos de windows 10 el icono de bluetooth
no se activa el icono en el administrador de dispositivos de window 10 para el bluetooth, por lo que no puedo emparejar ningun dispositivo de este tipo mediante bluetooth
sCAN wINDOWS INSTALLATION ON OTHER dISK
I have lost the central vision in both my eyes and am in South America for 3 months visiting my kids.
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please