1890 questions
Постоянная загруженность диска на 100%
Добрый день!
Диск постоянно работает на 100% в диспетчере задач, что замедляет работу системы
В чем может быть проблема?
Access to program affeced by scan
Every time your program scans my computer it affects the "Fences" program.
It then requires me to re-register that I am entitled to use the program using exactly the same password every time.
Surely it is possible for the scan to bypass making any changes like this....
It then requires me to re-register that I am entitled to use the program using exactly the same password every time.
Surely it is possible for the scan to bypass making any changes like this....
Перестали работать порты
После исправления ошибок перестали работать порты на ноутбуке.... написало типа много используется устроств
My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
I registered my account to windows insider but when I click get started in my computer's settings, it tell me that "we can't talk to our service at this moment please try again later", I tried this again and again but it does the same.
I registered my account to windows insider but when I click get started in my computer's settings, it tell me that "we can't talk to our service at this moment please try again later", I tried this again and again but it does the same. I tried a lot of fixese but they all don't work.
Windows Live Affected by first scan
Hi, I ran my first scan yesterday which was fine but now the content in my Windows Live 2012 set-up has been removed - specifically I have lost the folders, and their contents, I set up in my inbox, and I now have only emails in my inbox from the 18.06.2021. Everything else has gone. How can I get it back to where I was yesterday?
Unable to Switch Account Windows 10
Unable to Switch Account. Switch Option not seen. Added Microsoft Users + 1 Locall User Already
モニター画面が操作中に何回も、すぐ真っ暗になります。
本日より、スクリーンセーバーのセッティングと違う動きで画面が1分位で真っ暗になります。マウスを動かしたり、エンターキーを押すと元の画面に戻ります。
なにかこのソフトがよかれと思ってそういう動作をしているのかもしれないと思いメールを書きました。
余りに頻繁に画面が暗くなるので、今もzoomで会議をしておりましたが、何回もマウス、エンターキーの操作をしなければならなかったので煩わしく思い、解除できればと思いメールしました。
因みに、電源操作も全て解除し、なしの状態にしております。
以上宜しくお願いします。
佐藤光則 hsny7743@uranus.dti.ne.jp
なにかこのソフトがよかれと思ってそういう動作をしているのかもしれないと思いメールを書きました。
余りに頻繁に画面が暗くなるので、今もzoomで会議をしておりましたが、何回もマウス、エンターキーの操作をしなければならなかったので煩わしく思い、解除できればと思いメールしました。
因みに、電源操作も全て解除し、なしの状態にしております。
以上宜しくお願いします。
佐藤光則 hsny7743@uranus.dti.ne.jp
sleep mode
after running my pc from sleep mode the voice of pc become weak .
whats the problem ?
Thank You
whats the problem ?
Thank You
Uninstall
I used Windows to uninstall this software. Is there anyway to find out if there was any junk left behind?
Or on any software that has been uninstalled with the Windows Programs.
Or on any software that has been uninstalled with the Windows Programs.
All my products are not working
I have been getting eroor message of a catastrific failure on all of my products, this not good.
Morris Brown
Content hidden to protect privacy
New update fails to open
I am running Windows 10 Pro 19043.1052
I have auslogics BoostSpeed 12 Version 12.0.0.4 I get a message that their is a new version available to download and install.
I download the install program auslogics-boost-speed-setup.exe
When I click on the install program I get the error message that the filename, directory name or volume label syntax is incorrect and then the program dissappears. I have enclosed two screen shots. I am unable to install the upgrades. Please help.
I have auslogics BoostSpeed 12 Version 12.0.0.4 I get a message that their is a new version available to download and install.
I download the install program auslogics-boost-speed-setup.exe
When I click on the install program I get the error message that the filename, directory name or volume label syntax is incorrect and then the program dissappears. I have enclosed two screen shots. I am unable to install the upgrades. Please help.
Windows 11 beta
Hi,
Next week I'll be updating to Windows 11 will I still be able to use Boostspeed on that OS without doing any damage?
Next week I'll be updating to Windows 11 will I still be able to use Boostspeed on that OS without doing any damage?
Boostspeed Background Optimization
Hi,
I have been using boostspeed for almost an year now and I am a free user. It is all good but my only question is that should i let boostpeed run in backgroung and windows startup? Does Boostspeed optimize my pc in the backgroung when I enable this option? These processes take up a lot of memory. And also does boostspeed perfomance monitor optimize the pc in backgroung ?
Regards,
Rishi
I have been using boostspeed for almost an year now and I am a free user. It is all good but my only question is that should i let boostpeed run in backgroung and windows startup? Does Boostspeed optimize my pc in the backgroung when I enable this option? These processes take up a lot of memory. And also does boostspeed perfomance monitor optimize the pc in backgroung ?
Regards,
Rishi
cleanup of the registry
how to eliminate all references to the installation of a software from the Windows registry, in order to completely clean the installation files still present in the system and which are not eliminated by uninstalling that program
Add Folder (PIN) to Quick Access Not Working
I log into my laptop as local user ACS_LLC but when logged in it shows my email as mikewruth@gmail.com
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
Fake scan
When I log into a search engine ( Google or Bing) the home page comes up. If I search for anything like Gmail or anything else it says "connection is not possible". It appears that a virus is diverting the search. The security software is picking up that it is diverting to p.f.360.cn/pollmessage. I can delete the unauthorised enteries but cannot get rid of the virus so it keeps happening. Does your service get rid of this fakescan.?
Проблема
Здравствуйте почему Ауслоджик удаляет установленные обновления и препятствует их загрузке.Можно ли востоновить установленные обновления.
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
BUENOS DIAS
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
Program language
First of all, I wish you a good day.
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.