display settings/function
Не запускается Aslogics BoostSpeed
Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.
MSFS
Chaque fois que je fais un nettoyage en profondeur, je dois réinstaller MSFS.
Comment parametrer Bootspeed 11 pour éviter cela?
Bien à vous
Upgrading Windows Vista to 10
rescan
When you do a rescan, why don't you just have go ahead and do it, instead of having to click on scan again? Stupid question
Thanks Roger L Batchelder
Видеокарта
Проблеми с пуском из за того что ставлю найвисший приоритет в елекропитание видеокарти.Незнаю как решить ету проблему,также после обновления видеокарты .HD5000 виндовс делает перезагрузку системи и появляеца синий екран смерти.До обновлений драйверов видеокарти и обновлений виндовс таких проблем ненаблудалось.
Problema con servidor de internet y administrador de dispositivos
(0x8024a105)
A Game Application
Protect Doesn't Recognise MS Edge
It was working for a while on Bostspeed 10, but then it stopped working. I upgraded to Boostspeed 11 because there was no support for BS10 after BS11 came out.
BoostSpeed 11 still doesn't appear to recognise Microsoft Edge
Запретить windows кэшировать в mapping file
Используя RAMMap.exe выявил что те 10гб были схаваны Mapped File: standby. Почистил. но сейчас опять память утекает..
как можно отключить это недоразумение?
Служба SuperFetch отключена. Что еще может жрать память и не отдавать её?
Siempre se sobrecalienta el cpu al 100%
Intermittent PC Crashes/Freezes
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Kind regards,
Ian
Ian R. W
Dear Ian,
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Upvote (0)
Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Kind regards
Ian
Ian R. W
[/private]
Dear Suzanna,
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Kind regards,
Ian
Ian R. W
battery not charging
my battery is not charging. i lost the invoice from the assus dealer in goa, india namely INTECH COMPUTERS, Porvorim, Goa. He is not giving the duplicate. checked online and saw that the warranty of this laptom expires on May 27, 2020, whereas I bought this laptop in April 2020. I smell something fishing with this dealer. took it to service centre, they say that warranty expired as above, and if at all they can help they want the invoice.
playing videos
The error message says:
(Playback ID: vnJN0H3RgwlSS4V0)
https://youtu.be/u-BqgHfeZss
Lori
Не очищается корзина
Не могу очистить корзину,требуется разрешение администратора компьютера,кроме меня больше нет пользователей на этом компьютере !
Восстановить файлы не получается,очистить нельзя,вырезать тоже,проверял компьютер на вирусы и делал проверку дисков,всё хорошо
Что делать,как очистить корзину ? Меня это очень раздражает !
Windwos 10 x64
Add Folder (PIN) to Quick Access Not Working
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
cleanup of the registry
Fake scan
Проблема
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
Drivers
Here's a snapshot of the drivers.
Could someone tell why this is happening?
System Events Notification Service
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
Program language
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
RECOVERY OF WIPED IPHONE 14 PRO (NO BACK UP)
Looking forward to hearing from you.
Best wishes
Nikola
Se requiere ver en el administrador de dispositivos de windows 10 el icono de bluetooth
sCAN wINDOWS INSTALLATION ON OTHER dISK
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
Velocizzare apertura file cartelle e foto
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
USB Logitech G213 Keyboard and G203 Mouse will not connect and operate.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.