Edge Chromium
I have the new Microsoft Edge Chromium browser. Boostspeed does not recognize this browser. It will only clean Internet Explorer and the original Microsoft Edge browser. Is there an update coming with Boostspeed that will include this new browser? If so, when?
Very long time to load the computer! HElp!
can you help me please, I have a laptop that takes a long time to load please help me
Microsoft services malfunctioning
The Microsoft services are not working properly and some of it's features like EPIC GAMES and MICROSOFT STORE are not working. Can you help me solve that issue on my computer?
:D
Certificates
Good evening,
I have an issue with my computer no longer reading the certificates when I insert my id card into a card reader on my computer. I've tested the card reader on different computers with windows 10 as well. So it's not the device or id card. I tested different card readers to no avail as well. It seems to be a softare issue that I think Austologics is blocking or something else. I've tried different browers and that also did not lead to any success.
Hard Disk usage 100 percent
Why The Hard Disk of windows sometime use at 100 percent and really slow down computer ?
Bought a TP link Bleutooth usb
Dear Support,
I have bought a TP link UB400 USB and inserted it in the USB port immediatly i had connection.
Then i update the drivers for windows from your package i bought two or 3 days ago and it updated the driver to Bleusolell drivers.
fter nothing seems to work anymore on bluetooth aspects.
Also the CSR software downloaded give me u huge pain because i could almost not removed it anymore.
I need the old driver from windows apperently that is not bluesoleil as this is not responding.
The Bleutooth usnb device i can see in the list of devices but will not react.
Thank you fore th help as suh.
regards Rob.
Не отображаются элементы сайтов
Здравствуйте.
После оптимизации Auslogic BoostSpeed 11 перестали отображаться в браузере на сайтах: подложки карт местности, он-лайн графики.
une question ..
bonjour, ce n'est pas une question relative a un probleme .. je voudrais savoir comment programmer et installer le lpgiciel pour quil gere seul la meilleur mise en bonne condition de fonctionnement de mon pc sous windows 10 ? Cdlt à vous lire
fred TESSiER
fred34750
Start Up Error
Every time I start up my laptop I get an Error Message:
RunDLL
There was a problem starting xrWCbgnd.dll
The specified module could not be found.
selezione cartelle
Salve, vorrei sapere se nella versione registrata si ha la possibilità di selezionare le cartelle riguardo alla ricerca di duplicati o altro ?
cosa che invece non mi è stata possibile nella versione di prova del vostro "AUSLOGIC BOOTSSOEEDE11-
UTILIZZO windows 7
Grazie Massimo
sound in my PC
eliminar sistema operativo de windows extra con su aplicacion
queria eliminar un sistema operativo que le agregue accidentalmente pero no me deja al final me tiro error (lo queria destruir) lo estaba buscando para desbloquearlo pero tampoco aparecia asi que mi pregunta es:
como hacer para eliminar el sistema operativo con su aplicacion? porque a decir verdad no quiero formatear mi disco
Пропала регулировка яркости
Добрый день. Полностью пропала регулировка яркости после обслуживания через эту программу. Сочитание клавиш FN + яркость не работают. Ползунков нигде нет.
make simple
this is too mucj tab in software
Dashboard
Once clikc scanner
cleanup
optimize,protect and so on. huh i am officer i have not 01 hour to go thorugh each, please make menu and userinterface like AVG PC Tune Up, iolo system mechanic, Norton antivirus etc. its easy,
Please do some hard work,
МОва пк
Åñëè ó âàñ óñòàíîâèëàñü íåêòèâèðîâàííàÿ âåðñèÿ äîáâüòå shfolder.dll â èñêëþ÷åíèÿ àíòèâèðóñà.
Add Folder (PIN) to Quick Access Not Working
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
cleanup of the registry
Fake scan
Проблема
Drivers
Here's a snapshot of the drivers.
Could someone tell why this is happening?
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
System Events Notification Service
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
Program language
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
RECOVERY OF WIPED IPHONE 14 PRO (NO BACK UP)
Looking forward to hearing from you.
Best wishes
Nikola
Se requiere ver en el administrador de dispositivos de windows 10 el icono de bluetooth
sCAN wINDOWS INSTALLATION ON OTHER dISK
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
Velocizzare apertura file cartelle e foto
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
USB Logitech G213 Keyboard and G203 Mouse will not connect and operate.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.