1919 questions
Напортачил...
Я перенёс папку "Загрузки" из положения по умолчанию на диск D, но не создал отдельной папки, и теперь "Загрузки" - это весь диск D. Получается бардак.
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
Нужен ли антивирус если есть Bootspeed ??
Нужен ли антивирус если есть Bootspeed ?? Ваша программа спровляеться с вирусами и майнингами??
Logitech C920s
I have a Logitech C920s webcam. Everything was working perfectly fine until Wednesday evening. At that time I started doing a bunch of maintenance within BoostSpeed. Something in my system was changed, and now I get a BSOD whenever I boot my computer when the webcam is plugged in. If I remove the webcam from the USB port, then the computer boots fine.
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
WIndows Security closes when opened
Hi I'm Raffy and a New member of the Auslogics
When I open Windows Security Application it closes immediately
how do I fix it
PROVING
How to prove my performance specifically that mu processor is from type U
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
Microphones disabled
After I installed Auslogics and ran all the tests, my camera and microphone were disabled. I managed to turn the camera back on but not the microphone even after going into my Privacy settings and enabling it. It happened on both machines, one with a Logitech headset and the other with a Jabra 510 speaker. Both microphones are still not functioning. Please advise. I am running Windows 10 on both desktops.
Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении
Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении.
Обновил всевозможные драйвера, обновил биос(правда теперь появилась надпись при запуске "Checking media...").
Проверил состояние батареи через консоль(часть отчета прикрепил файлом) и там осташееся емкость 12 октября остановилось на одном значении, т.е. батарея не заряжается и не разряжается.
Что делать в данной ситуации, чтобы ноутбуком вновь можно было пользоваться автономно?
Unable to make screen lighter or darker
I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.
Skipped traces
Lanovo with windows 10
Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-
PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!
Word Document Files
Does your Duplicate File Finder work only on image, video, audio, archives and application files?
How to find duplicate Word document files, pdf files etc ?
unidentified files following upgrade to Win 10 version 2004 prevent defragmentation
I have recently upgraded my Win10 x64 PC to version 2004 from Windows update. Prior to the upgrade the PC was clean and fast and the system drive was defragmented using Auslogics Defrag Ultimate. Fopllowing the upfgrade and subsequent cleanup, I ran defrag again and the drive now has approximately 20% of its used capacity filled with files that Auslogics Defrag will not identify (light green block icons, mouse click for file info invokes the prompt "This block contains file system service data. Detailed view is not available".
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
Как корректно обновить программу Auslogics?
Здравствуйте. Сегоодня вышла новая версия программы и возникает резонный вопрос - как установить обновление? Придется полностью удалять старую версию (с помощью спецпрограмм типа Revo) и устанавливать новую? Или есть еще другой вариант?
Lock-screeen blury
Hello!
When starting my computer (or when locked) I'm allways directly prompted for password or pin, whith a blury picture in background.
However I like those beautyful pictures and would like to see them clearly prior to logging in. What to do?
/Björn-Ove
When starting my computer (or when locked) I'm allways directly prompted for password or pin, whith a blury picture in background.
However I like those beautyful pictures and would like to see them clearly prior to logging in. What to do?
/Björn-Ove
sCAN wINDOWS INSTALLATION ON OTHER dISK
I have lost the central vision in both my eyes and am in South America for 3 months visiting my kids.
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
Velocizzare apertura file cartelle e foto
Buongiorno,
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
Se requiere ver en el administrador de dispositivos de windows 10 el icono de bluetooth
no se activa el icono en el administrador de dispositivos de window 10 para el bluetooth, por lo que no puedo emparejar ningun dispositivo de este tipo mediante bluetooth
My computer does not see any phones connected via USB
My computer does not see any phones connected via USB cable. I tried changing both phones and cables. The computer sees the component itself but cannot access it in the hard drive menu. I always give access to files on the phone and the phone itself charges normally
Edge permissions
I use Windows 11 and Edge is my default browser. I love Microsoft Edge but can't understand why every time I start my computer, Windows asks me twice to give permission for it to use Edge, and then later when I go to use Edge it asks me again.
Given that Microsoft has created both the software that runs my computer and also Microsoft Edge, I speculate it should be possible to avoid such an unecessary procedure. Will you please tell me how to do this? Thanks.
Given that Microsoft has created both the software that runs my computer and also Microsoft Edge, I speculate it should be possible to avoid such an unecessary procedure. Will you please tell me how to do this? Thanks.
WinSXS via Auslogics Windows Slimmer 4.0.0.6
Hello,
I wanted to know why, when I clean the WinSXS folder via Auslogics Windows Slimmer, I always have "1 ignored item" at the end, for a size exceeding 1.3 GB. In addition, I cannot see the item concerned. This problem occurs both with the PRO version of Windows Slimmer 4.0.0.6 and with the free version.
I also wanted to know how to delete it. I have already tried via CMD DISM, and DISM++, but CMD remains stuck at 70%, and DISM++ only deletes 200 MB.
Thanks in advance for your answer.
I wanted to know why, when I clean the WinSXS folder via Auslogics Windows Slimmer, I always have "1 ignored item" at the end, for a size exceeding 1.3 GB. In addition, I cannot see the item concerned. This problem occurs both with the PRO version of Windows Slimmer 4.0.0.6 and with the free version.
I also wanted to know how to delete it. I have already tried via CMD DISM, and DISM++, but CMD remains stuck at 70%, and DISM++ only deletes 200 MB.
Thanks in advance for your answer.
Зависает программа
Здравствуйте уважаемые. Скажите пожалуйста, почему зависает программа Auslogics SSD Optimizer 2 когда начинается Обрезка, и что делать?
32-bit and 64-bit versions
Looking at the report from Revo Uninstaller of applications on my windows laptop running Windows 10, I can see most of them are the 64-bit version but quite a few of them (including Auslogics Boostspeed 13, Adobe Digital Editions 4.5, Kaspersky, Dropbox to name a few) are showing as the 32-bit version.
I believe if these were the 64-bit version they will run better and faster.
Is there anything I can do to convert them from 32-bit to 64-bit?
Please advise.
Thanks!
Chris
I believe if these were the 64-bit version they will run better and faster.
Is there anything I can do to convert them from 32-bit to 64-bit?
Please advise.
Thanks!
Chris
i cannot play sound in my headphone conected via bluetooth
can you please help me fix my sound. it doesnot work!
Delete all script typed into google search.
When I type something into incognito window,how do remove it so it can never appear again?
Нерабочие функции "Увеличить яркость", "Уменьшить яркость" и "Ночной свет",
Здравствуйте!
У меня ноутбук ASUS TUF Gaming F17
После установки Windows 11 были рабочие функции "Увеличить яркость", "Уменьшить яркость" и "Ночной свет", который автоматически уменьшал яркость экрана для комфорта глаз.
1) Через некоторое время функция "Увеличить яркость" и "Уменьшить яркость" просто пропала и её нет в настройках как показано на скриншоте. Она была над функцией "Ночной свет".
2) Функция "Ночной свет" просто не работает, видно на скриншоте, что ползунок в режиме ON, а яркость экрана не меняется
В чём проблема и как вернуть эти функции в рабочее состояние?
Восстановление системы на момент установки Windows невозможно, т.к. нет точки восстановления на тот период.
У меня ноутбук ASUS TUF Gaming F17
После установки Windows 11 были рабочие функции "Увеличить яркость", "Уменьшить яркость" и "Ночной свет", который автоматически уменьшал яркость экрана для комфорта глаз.
1) Через некоторое время функция "Увеличить яркость" и "Уменьшить яркость" просто пропала и её нет в настройках как показано на скриншоте. Она была над функцией "Ночной свет".
2) Функция "Ночной свет" просто не работает, видно на скриншоте, что ползунок в режиме ON, а яркость экрана не меняется
В чём проблема и как вернуть эти функции в рабочее состояние?
Восстановление системы на момент установки Windows невозможно, т.к. нет точки восстановления на тот период.
IMPOSSIBILE APRIRE, LEGGERE E APPLICARE IL FILE DI CUI SOPRA
Buona sera
Sono abbonato all'eccellente software JRIVER MEDIA CENTER (ANCHE SE MOLTO COMPLESSO E COMPLICATO).
A cominciare dagli aggiornamenti. Quando è disponibile una nuova versione (attualmente JRIVER33) ricevo un messaggio via e-mail con allegato dal titolo Media Center33 Master-605914.mjr
Ora questo maledetto file mjr non lo conosce e non lo riconosce nessun sito di aiuto all'utente.
Ho scritto vari messaggi al SERVIZIO DI ASSISTENZA di Media Center, negli USA, ma purtroppo la risposta è sempre la stessa: Il nostro sistema utilizza per maggiore protezione solo questo tipo di file mjr."
Ho visitato decine di siti nel web per trovarne almeno uno, in lingua italiana, che documentasse le procedure di installazione e aggiornamento del programma JRIVER. Nessun risultato.
Per questi motivi ho deciso di utilizzare la Vostra potente risorsa. Per risolvere questo piccolo-grande problema.
Ringrazio per l'attenzione e resto in attesa di decisivo riscontro.
Giancarlo Perani
Sono abbonato all'eccellente software JRIVER MEDIA CENTER (ANCHE SE MOLTO COMPLESSO E COMPLICATO).
A cominciare dagli aggiornamenti. Quando è disponibile una nuova versione (attualmente JRIVER33) ricevo un messaggio via e-mail con allegato dal titolo Media Center33 Master-605914.mjr
Ora questo maledetto file mjr non lo conosce e non lo riconosce nessun sito di aiuto all'utente.
Ho scritto vari messaggi al SERVIZIO DI ASSISTENZA di Media Center, negli USA, ma purtroppo la risposta è sempre la stessa: Il nostro sistema utilizza per maggiore protezione solo questo tipo di file mjr."
Ho visitato decine di siti nel web per trovarne almeno uno, in lingua italiana, che documentasse le procedure di installazione e aggiornamento del programma JRIVER. Nessun risultato.
Per questi motivi ho deciso di utilizzare la Vostra potente risorsa. Per risolvere questo piccolo-grande problema.
Ringrazio per l'attenzione e resto in attesa di decisivo riscontro.
Giancarlo Perani
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 22,5 Mb
Download size: 22,5 Mb
Compatibility: Windows 11, 10, 8, 7