Использовал вашу программу после чего пропали значки из трея, после сделанного я решил удалить программу но значки не вернулись, а с переустановкой пропали откаты в программе, пожалуйста помогите мне с этой проблемой

Dear Sir or Madame,

My unit keeps crashing and indicating stop code: IRQL_NOT_LESS_OR_EQUAL. I have tried every thing I know with no success.

Please help.

Thanking you in advance,

Coach Rod

hi , my windows be slowly than when i buy it and i don t know what should i do for it , i think its for that my computer ruuning some applications atumotacely and i should close them in the task bar , what shoud i do?

I recently had to do a Windows re-install (repair technician did in shop) because of BSOD issue related to dell driver. I bought BoostSpeed 11 to try keep my PC in good operating condition and help with many of the Windows issues including fixing a restart problem. Since the re-install of windows, restart actually restarted just once. Now when try restart it just goes through the motions, on screen message says restarting windows and monitor goes dark (power is on) but restart does not happen. I wait 5 minutes and then press power button to shutdown. I repress power button to bring windows back on. Windows 10, using this method takes usually between 45 to 60 seconds.

If it wasn't for windows updates I could live with not using the restart option. However, windows update requires the restart so I expect it to fail each time there is an update. Recently did scan and did the suggested tweaks in the Maintain section of BoostSpeed 11. Any thoughts or suggestions?

у меня на ноутбуке делл после обновления программы монитора пропал ползунок настройки яркости есть только ночной режим ина клавиатуре тоже не работает настройка яркости что делать уже не знаю

I have Acer Aspire 5750 G laptop, pritty old one, with win10 latest. It works well but when it goes to sleep mode everything gets slow (all applications, movement of mouse, all system), I've been waited for a long time to give it a time to wake up but nothing. Only solutions is to restart it, and after that it is in normal working mode. Before latest win10 update (2004) it was OK.
I tried so many things to do (everything throu Auslogics, update driver, clean up, registry, defrag ...), but nothing.
Is there any advice from you?

Hi, I have been a customer of yours for a long time. I am satisfied with the software but now I need to ask a question or rather a report.
I have the license for 3 PCs, and on one PC I have the new MSFS FS2020 simulator. Thanks to the backup I restored the files. The problem is that after deep cleaning privacy, traces in applications, empty folders, registry files, Windows system files could no longer start the game. I thought to warn you and I hope that the problem is solved. Thanks and sorry. My configuration: CPU i7-8700.... Windows 10 PRO.... RAM 48 Gb.... HardDisk M2 NVME samsung 1Tb.... GPU RTX 2060.

Les logiciels office ne se lancent plus

All devices listed under sound video and game controllers have yellow error triangles and when you open properties for each it shows "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)" I have rebooted, uninstalled all and rebooted and nothing changes usb audio has red x and no audio output device is installed and usb camera says camera in use by another app. I have disconnected both after uninstalling in device manager, rebooted then plugged them back in all still come up with error triangles and audio / camera are not functioning.

To Whom It May Concern,

In recent weeks, I have been experiencing intermittent crashing/freezing of my PC. This sometimes happens 1/3 times a day or I can go a few days without it occurring at all. It is not, actually, a BSOD - just a "straightforward' freeze or crash.

When accessing the Windows Event Log, the common denominator would appear to be identifed as follows:

Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.

I would consider myself reasonably computer savvy, describing myself as a software 'Geek', in addition to having set-up remote computing facilities. However, this is difficult to readily identify and despite, browsing the Internet extensively, I find I cannot resolve or prevent this from crash from occurring.

The only 'fix' I have reviewed is accessing 'Windows Services' that requires the 'Server to be restarted' but as this is already running (having reset itself?) I cannot, actually, do anything:

https://social.technet.microsoft.com/Forums/en-US/cd53a3ed-3833-4a62-8784-2ab3fa0c464e/unable-to-open-the-server-service-performance-object-the-first-four-bytes-dword-of-the-data

Any advice, recommendations or support you an afford me would be very much appreciated.

I am grateful for your attention, time, effort and anticipated co-operation in assisting me to resolve this perplexing and frustrating issue.

Kind regards to you and your colleagues at Auslogics

Ian

Ian Willsher

I hate being such a software web idiot. Its a shame with this being a 21st century of Knowledges and we still have such a night mare internet system.After emailing you all and Mcafee and numerous deletions of safety's and various uploads and downloads and turn this off and reboots , finally I got Auslogics 12 Boostspeed fully downloaded with no errors or failiers to download. I guess , I see how grand , I am sure it works.

Why don't I have any streaming sound on prime video, you tube, netflix, etc. after you scan and resolve? Very annoying. How to I fix this, so I can enjoy my videos.

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.