MICROSFT 11
fail fast exception
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
mise a jour
programa ya instalado
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Auslogic 13 update problem
software Auslogics
profile
New Problem Notifiction
何回cleanningをおこなってもデフラグや調整項目がある
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Accessing Permission to view photos
play game without lag
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
logiciel
à l'ouverture de l'application un message d'erreur : 0x0000007E
j'ai supprimé 1 fois le logiciel
j'ai enregistré une nouvelle fois et à l'ouverture,jèai le méme message d'erreur
BoostSpeed 12 deleting my Spotify playlist files
EWhy does every time i run the BoostSpeed 12 scan it deletes all of my Spotify downloaded playlist files?
Skipped traces
Lanovo with windows 10
Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-
PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!
Windows Defender Disable Remove
THANK YOU
SAKLIS DIMITRIS
i got few problems with nmy network can u help please
how are you
i need help please
i have like a lot of issues with my network ( dns - dhcp - ,,,,, etc ) a lot of them
thanks ^^
display scaling
I play cs go, and I would like to know how to optimize the pc for this game, + I want to minimize impuct lag
the mouse often floats and the screen is blurry
Intallation original software error
Upgrading Windows Vista to 10
defrag 10 running sooo slow
Used to run fast, I have changed the advanced settings, now running slow,
I guess you cannot know which advanced settings I have enabled, (most of them)
what do you think? and what is your best guess as to my problem?
Проблемы со звуком
Звук в Windows 10 хрипит и заикается как исправить все стандартные средства не помогают
CPU Usage
I'm new to the softward. Running v12.
Auslogic is running in the background, I guess. (I didn't start any actions since my recent reboot.)
It's using between 25 and 40% of my CPU capacity. I DO NOT want that to happen. If something's running on its own, how do i schedule it to run during the night.
Why is it doing that? What's running? How can I keep it from starting a process on it's own.
(I know i can hit "End task" in Task Mgr, but I wanted to know how to prevent this in the future.)
Thank you,
SjK
Disengaged Microphone
Defrag an SSD
Using Dedicated Graphics Card
I've got a problem with switching to my dedicated graphics card. For some reason games like CS:GO tend to run on integrated graphics. I've tried everything such as going to Nvidia Contol Panel and choosing cs:go, and setting it on my Nvidia card. When I go to Graphics settings and choose CS:GO it says Intel(R) HD Graphics 3000 for Power Saving and High Performance (which it shouldn't be like this) . I've installed the latest version of my Nvidia Card ( which is 391.35). The only way I can use my Nvidia Graphics for CS:GO is that I have to disable Intel(R) HD Graphics 3000 in Device Manager (which then I'm limited to 60HZ and can't change color settings)
I'm using an Asus Laptop( Asus K53SV)
Here is some information about the hardware that I'm using:
Geforce GT 540M
Intel(R) HD Graphics 3000
I hope you guys can help me with this and have a good day :)
USB-C Gigabit Ethernet Mini Adapter does not indetify network
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
completed (order number: 3088xxxxx).
i cannot start boostspeed. they say its for my safety. i do not understand this
C:\Program Files (x86)\Auslogics\BoostSpeed blocked by integrator
Intermittent PC Crashes/Freezes
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Kind regards,
Ian
Ian R. W
Dear Ian,
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Upvote (0)
Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Kind regards
Ian
Ian R. W
[/private]
Dear Suzanna,
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Kind regards,
Ian
Ian R. W