I have tried a few "fixes", e.g.
In Startup and recovery, used "Restart" for clean start,
Start in "Safe Mode",
Untick "Automatic restart",
Removed or substituted all devices, hard drives plus mouse and keyboard, even monitor and RAM, except Graphics card - no fix. Defragged and scanned hard drives for errors.
Pressed power button with power disconnected.
Re-installed Windows and updated.
All fans and heatsinks not clogged with dust.
Edited Registry = "No Auto Reboot With Logged On User"!
I have recent system images saved but none before the problem started!
Any suggestions? Thank you, David
I had some problems installing Win 10 updates. The problem keeps recurring and I would like information from your support.
You may find this error code helpful: (0x80080005), which is the message that keeps popping up:
The device is missing important security and quality patches!
Just installed my Driver Updater on my new PC and after updating the drivers and a required restart I get a Bluescreen with the message "Inacessible Boot Device" adn restarting does not help, nor does turning the desktop off and on again.
What to do now?
PS: The "Device" above is probably incorrect as I'm writing this from my laptop.
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
ちなみに、C:\Program Files\WindowsApps を開こうとすると、
I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?
I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
Thank you so much for your support.
Alex Janssens (Iepenburger)
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.
Hello Support. On 02/13/20 I purchased an iBUYPOWER gaming desktop from BestBuy:
•model BB971 which includes the TUF B365M-PLUS Gaming ASUS motherboard, Intel 15-9400F, 6-Core 2.9GHz (4.1 GHz Turbo) NVIDIA GeForce GTX 1660 6GB. It has a 240GB solid state drive & 1TB SATA III hard drive. And includes Windows 10 home edition. (see CPUID report attached for further description)
However it continues to freeze up at various times throughout the day for typically about 4 seconds. So I tried a number of repairs after researching this problem on the internet; where I saw that many other people have had this same issue. None of those repairs have worked so far. Notably, I have NOT revised the BIOS as it appears to have the latest version: 1201 dated 07/15/19.
Do you have a solution for this? I love this desktop and have already loaded all my applications, so really don’t want to return it for a new one.
MS Excel does not open on click, need to go to File Open. When received as an email attachment, MS Excel only opens a blank grey screen. Can only open after saving attachment then doing a File Open.
Tried the DDE thinh and your software said it had made the necessary changes to allow MSExcel files to be opened by clicking on them rather than using File Open