Deleted files
Windows system font distortion
ваш деинсталятор не удаляет эту программу
Can not print
Hard drive not showing up on optimize screen
Should I be concerned about this? What does this mean?
thank you for your response(s).
PC slows down after a period of being on, following re-boot.
After I re-boot it works fine but several hours or perhaps a day later, the PC slows down and re-quires another re-boot.
I just noticed today, after upgrading to V 12.3.0.1 that, although it still slows down, I selected the Disable BoostSpeed instead of leaving BoostSpeed running in the background, and the PC immediately sped up to normal! This is the first time I have tried that.
Have you run into this anomoly before and/or do you have a fix for this?
Many thanks!
Não reconhecimento pelo sistema.
Tenho uma unidade SSD externa que não esá sendo reconhecida pelo gerenciador de arquivos e nem pelo gerenciador de discos mesmo tendo feito os procedimentos básicos.
Slow computer
Before I started to use Auslogics my computer was very slow. Then I used your Auslogics and the computer was much faster. However, few days aftrer it become slow again from day to day. Every few days i do full Scan and Clean and it help a little bit (it become a bit faster , but not as it was the first time i did the first scan and then again after few hours it become slow again,
full C drive
Проблемы с fps в играх
Ошибка при обновлении "Google Chrome"
HP x2 210 G2 Detachable PC - Specifications
My other device has ATOM x5 8350 / 2Gb Ram / 32 GB SSD
Running WIndows Home
Is there a list of windows services that I can disable in order to get it as lean and functional as possible?
I bought it used and I cannot believe people find these devices functional at all.
Call it a summer project...
DEFRAGMENTATION EINER SSD-FESTPLATTE
просмотр
Computer shutting off
App error
Name, Value, Advanced
Application Error: Faulting application name: svchost.exe_FrameServer, version: 10.0.19041.1566, time stamp: 0x1f37eb46Faulting module name: RsProvider.dll, version: 1.30.0.0, time stamp: 0x57ee1a06Exception code: 0xc0000005Fault offset: 0x000000000007bd6dFaulting process id: 0x2300Faulting application start time: 0x01d883048cd13be0Faulting application path: C:\WINDOWS\System32\svchost.exeFaulting module path: C:\Program Files\Realtek\RsProviders\RsProvider.dllReport Id: ff0c9809-f014-46e1-8f75-b7775e36760aFaulting package full name: Faulting package-relative application ID: 6/18/2022 6:14:18 AM
Printer not connecting
I recently used Auslogics to clean my computer. I believe I went to "optimize" to perform a deeper clean up. The question came up at the end to clean which I clicked on. My printer is now showing default, I cannot get it to connect to my internet either by the "wizard" or manually. HELP!!!
I am not getting full gigabit speed on only my computer.
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
Windows Settings
I can't access my Windows Settings. When I try to access it the page shows and then goes away. Can your software fix this issue?
Режим сна
Failed Windows Updates
(2019-10 Cumulative Update for Windows 10 Version 1903 for x64-based Systems (KB4517389) - Error 0x80070002)
My system is a Lenovo Think Centre w/I5 Processor.(M91)
Problem with VPN
speaker icon
after todays update the sound icon when clicked upon appears ok but as soon as the mouse is moved to adjust the sound the icon disappears
What can I do to bring it back to normal?
By the way: the subcategory is too limited to direct the problem to the right technician in the correct dept.
Super slow opening of files and folders
For the last week I am having issues opening any file or folder. It seems like it takes a minute or 2 for them to open. It is driving me nuts.
I have tried most of the items in https://windowsreport.com/file-explorer-slow-windows-10/ with no effect.
Anything you may provide would be appreciated!
Thank you
Robert
Windows 11
Apparently my machine is not compatible for the Windows 11 upgrade.
What do I need to do to make it compatible?
No sound after connectin phone with bluetooth
Unable to Send / Receive emails
Since installing your software I am now unable to receive email via MS Outlook -
Пропали значки из трея
Unable to download standard apps like calculator etc
Print spooler issues
My computer keeps dropping its print spooler. I reload windows and it works until I install Auslogics Speed Booster. Any fixes?
Flash drives
All of my flash drives are not recognized, irrespective of the USB port, I use. How do I reactivate the USB ports so as to recognized the flash drives?
AusLogics BoostSpeed
When using AusLogics BoostSpeed of any version (from version 5 to the latest) in the Microsoft Windows 10 Enterprise 2016 LTSB operating system, the reflection of available networks in the system tray disappears when you click on the network icon (both Wi-Fi and local). As well as a keyboard input indicator. Moreover, when uninstalling AusLogics BoostSpeed, this problem is not resolved. Which eliminates the use of AusLogics BoostSpeed on laptops with this system. How can this be fixed?
issue while booting
When I turn on my pc,
after windows logo a blank screen comes for about 3-4 min.
then a "please wait" loop comes which lasts for about 1 min.
My PC: It's a prebuilt "ACER Veriton series."
How do I stop starting up when I start the computer
When I start up my computer, PCTuneUp starts up. How do I prevent this from happening.