With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
I tried all the internet recommdndations to get rid of this damn thing; it's like a cacer that just keeps coming back.
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Ihr Driver-Updater von Auslogics hat mir bei der probeweisen Nutzung leider meinen Maustreiber irreparabel ausgetauscht, sodass ich letztlich mühevoll das komplette Windows neuaufspielen musste. - Das war nicht gut.
2) Seitdem fehlt mir auch für eine COM-Schnittstelle der passende Treiber. Ein Support beim Computerhersteller bzw. Intel konnte nicht weiterhelfen Vielleicht haben Sie eine Idee?
I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?
I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
Thank you so much for your support.
Alex Janssens (Iepenburger)
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.
Hello Support. On 02/13/20 I purchased an iBUYPOWER gaming desktop from BestBuy:
•model BB971 which includes the TUF B365M-PLUS Gaming ASUS motherboard, Intel 15-9400F, 6-Core 2.9GHz (4.1 GHz Turbo) NVIDIA GeForce GTX 1660 6GB. It has a 240GB solid state drive & 1TB SATA III hard drive. And includes Windows 10 home edition. (see CPUID report attached for further description)
However it continues to freeze up at various times throughout the day for typically about 4 seconds. So I tried a number of repairs after researching this problem on the internet; where I saw that many other people have had this same issue. None of those repairs have worked so far. Notably, I have NOT revised the BIOS as it appears to have the latest version: 1201 dated 07/15/19.
Do you have a solution for this? I love this desktop and have already loaded all my applications, so really don’t want to return it for a new one.
MS Excel does not open on click, need to go to File Open. When received as an email attachment, MS Excel only opens a blank grey screen. Can only open after saving attachment then doing a File Open.
Tried the DDE thinh and your software said it had made the necessary changes to allow MSExcel files to be opened by clicking on them rather than using File Open