I downloaded some "pre-installed" software on my computer (i.e., just need to unzip the RAR file and the software will start working; no need to manually run the installation tool). If I no longer need this software, how do I completely uninstall it? I already deleted the "pre-installed" files, but I believe my computer still has some residual memory of it. I did a registry cleanup already...anything else I need to do?
I am a bit interested in above mentioned softwares compact feature. When running it it says that it can compress W10 with 1.9gb, windows inbuilt feature says only 0.5gb when running it. So how can your program compress so much more, 1.4gb more, that is a lot. Very!
I hope i will get a really detailed, extensive answer to my question, now when i have taken the trouble to download and install "Boostspeed" to get an answer.
So, how can your software compress so much more then Windows inbuilt feature? Why the difference? What does it really do?
I have a corrupted USB drive and now I can't access anything on it. I don't care about the files on it now. I would like to know is there a way to UN-corrupt it in your tools. I would just like to be able to use it. It's a pretty new flash drive - only used a few times. I think I killed it when I pulled it out after it gave me a warning. I wasn't able to get the warning to go away.
Found area to at least attach info from last two sent to Tech Support.
Screenshot is only partial list of ewrrors. I like BS 11-12, but this product should go in the trash.
What the hell is the subcategory for when you cant put anything in related to the BitEReplica software issue.
You should hire someone that understands people, not zeros and ones.
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
I have bought a TP link UB400 USB and inserted it in the USB port immediatly i had connection.
Then i update the drivers for windows from your package i bought two or 3 days ago and it updated the driver to Bleusolell drivers.
fter nothing seems to work anymore on bluetooth aspects.
Also the CSR software downloaded give me u huge pain because i could almost not removed it anymore.
I need the old driver from windows apperently that is not bluesoleil as this is not responding.
The Bleutooth usnb device i can see in the list of devices but will not react.
Thank you fore th help as suh.
除外リストに「HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default\*」を設定しましたが、効果がありません。
他に、Microsoft Print to PDFの保存に使用したフォルダがスキャンするとドキュメントフォルダに初期化されてしまいます。これも除外リストに
「HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\*」を指定したのですが、効果がありません。
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?
plz help.. i had also bought/registered em auslogics driver installer but it kept on crashing and last hour an error came up saying some f***in file was missing and shit.I DIDNT EVEN TOUCH ANYTHIN. i hav avg anti antivirus (thot) and kaspersky tdss killerso yeaa i ran a deep scan and a root kit scan but alas no virus was found either. SO PLZZ HELPP my ames keeeeeep on crashing and stuff
whenever i open somethin well, it only stays 'opened' for like a min or half and then my whole system freezes. i had earlier enabled that whenever there gonna be critical error, bootspeed's gonna restart my system and stuff
SO THAT MEANS WELL IF MY SYSTEM KEEPS ON RESTARTING ON ITS OWN THEN IT EXPERIENCING SOME CRITICAL ERRORS
plz helpp i hv had enough of this shit plzzzz !
i cant even add a file cos my system keeps hangin so i cant even snap a screenshot
plzzz devs help plzz
As it says on the title - after using Auslogics Boost Speed to clean up my computer, my Japanese IME stopped working. The options to input using the various keyboards disappeared and reinstalling the language did nothing. Restarted my computer, tried fiddling around and it won't come back. I've attached a picture of how it should look normally and how it looks now. Any help with getting it back would be appreciated.
I am using the BoostSpeed11 product prior to an effort to upgrade from Windows 7 to Windows 10.
I have tried before using the product but get the error message 0x8007042B-0x3000D Failure to migrate data on first boot.
I have just cleaned up the zero bytes folders, traces and duplicate files.
There is some thought that antivirus should be stopped while attempting the upgrade. I am presently using Eset internet security.
When performing the migrate data upgrade are all the files carried over? How much should be backed up?
Any hints you can provide will be gold.
In the event that I finally get the upgrade done which of your products should I install, and is it OK to leave the product I have
installed while performing the upgrade?
Eset has logged the driver checker of yours as a pup.What's the go there?