1854 questions
Free disk space issue
I have two external HD of exactly the same size, 3.63 TB, they both hace exactly the same amount of data stored on them both, 1.84 TB, 2240 files, 61 folders. My issue is that the "free space" shows a difference amount, 1.50 TB verse 1.55 TB. I have ensured that recycle bin on them both are empty and ran every program that would make sense with the confines of BoostSpeed 13 and nothing seems to make any difference. This isn't the only example of this sort of thing happening. I'm bewildered. Please advise.
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
PC not powering up
Hi,
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
Drive is 81% fragmented and disk defragmenter does not defrag, just states completed.
Drive is 81% fragmented and disk defragmenter does not defrag, just states completed. How to get the drive to defrag/optimize?
RunDLL Error Messge keeps popping up
I get this message everytime Boostspeed runs:
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
Cannot access tools
I tried to access tools on Boostspeed 13 but got notice "LIbrary not registered" How do I fix this?
Windows File Explore doesn't respond
I did the four scans suggested under Maintenance and the File Explorer has stopped working. I've tried several fixes suggested on line, but nothing works. What to do?
Auslogics icon for all users
I want to know how my husband can get Auslogics on his side of our computer? He tried to download the new version but encountered an error! Is there a fix for this?
Auslogics Driver Updater should I cancel or wait for installation to finish?
I am trying to update my Nvidia GeForce GTX 960 driver via Auslogics Driver Updater and it's taking a very long time to install. I began the process yesterday (29/03/24) at around 7pm and expected it to take a long time to back-up the old driver setting and then download the new driver. I've come back to my computer at 30/03/24 at 1pm and it is still installing.
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Power cord
I have a pc and monitor and the cables got mixed up when moving house.
My monitor is Acer K222HQLBID 21.5 Inch HDMI Monitor.
My personal computer is PACKARD BELL - iMedia S 2885 Desktop PC
One of the cables is a 5amp cable and the other is a 10 amp cable. They both have the same connection at the other end to attach to the equipment.
I cannot find the manuals and am having no success online to find the answer.
Do you know which cable is for the monitor and which cable is for the personal computer.
Which devise is used with the 5 amp cable and which device is used with the 10 amp cable?
My monitor is Acer K222HQLBID 21.5 Inch HDMI Monitor.
My personal computer is PACKARD BELL - iMedia S 2885 Desktop PC
One of the cables is a 5amp cable and the other is a 10 amp cable. They both have the same connection at the other end to attach to the equipment.
I cannot find the manuals and am having no success online to find the answer.
Do you know which cable is for the monitor and which cable is for the personal computer.
Which devise is used with the 5 amp cable and which device is used with the 10 amp cable?
Computer shuts down instead on going to sleep
My Computer shuts down instead on going to sleep. So I have to reboot to start up. Any help would be greatly appreciated.
Thank You
~Bill
Thank You
~Bill
The graphics adapter performance
As a result of system optimization, I receive the message "The graphics adapter performance index is 8.1, which is lower than the average system performance index of 9.1. It is recommended that you replace the graphics adapter with a more powerful one."
My question: Does this affect overall system performance? What will change if I replace the video card with a more powerful one, given that I do not play video games?
My question: Does this affect overall system performance? What will change if I replace the video card with a more powerful one, given that I do not play video games?
KB5034441
Hello,
Do you have a solution or a suggestion for the infamous Win 10 update issue KB5034441 (Win 10, x-64)?
Do you have a solution or a suggestion for the infamous Win 10 update issue KB5034441 (Win 10, x-64)?
Hacked everyday
Cannot get away from hacker an person is trying my brain on how to find ip address or rid person toally on all 4 pcs. Can you help?
Пропажа значков
Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте
Bootspeed 13
I recently received an emil in regards to Bootspeed 13, unfortuanatly I didnt follow it up because of Covid, now that I am better I would like to put my name down for ithe upgrade.
kind regards chris moore
kind regards chris moore
Unable to Install the new Auslogic Boostspeed 13.0.0.1 update
Hi
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
How to remove 0 data files
Is it possible to find all files with 0 kb and deleted them?
I have many mp4 and mp3 files that have ZERO data all over in different folders and drives.
Thank you
Проблема с HDD диском
Доброго времени суток. у меня случается проблема с жестким диском (seagate barracuda 1TB), при работе прогрмм находяшихся в нем, он часто вылетает. Замена сата порта и сата кабеля не помогает. Диск относил в сервес центр, говорят исправен. Помогает только ваша программа Auslogics boostSpeed, но помогает где то только на месяц пользования компьютером. Что мне делать?
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Windows Blickpunkt-Bilder
Nach BoosSpeed12 wechseln die Windows 10 Blickpunkt-Bilder nicht mehr und muß von mir manuell repariert werden. Welche Einstellungen können das verhindern?
504 Auslogics files designated as Malware
504 Auslogics file were identified by Malwarebytes as being potential Malware.
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
I am unable to switch to keyboard Chinese Input Method after using Auslogics BootstSpeed
After using the Auslogics BootstSpeed and the function of cleaning the Registry files, I found that I am not able to switch back to Chinese input method anymore and I can only type in English. I tried to type the hotkey "Left Ctrl +Shift", nothing happened. I tried "Ctrl + Space" or "Win + Space", also nothing happended. The small icon at shows "EN" at the bottom right corner was disappeared (see attached).
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
Postgrest SQL_Службы Microsoft
Добрый день!
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
System Booting
When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
Malware
Does your program detect Malware? I have been getting the blue screen of death and the reason listed is
System Service Exception
What failed: Dot 4 sys
System Service Exception
What failed: Dot 4 sys
Disk Defrag
Buongiorno,
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
Duda
Estimados amigos:
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
laptop acer aspire 5735Z
after I ran bootspeed and tutorals 1-4 my laptop will not shutdown it starts to close then boots to sign in page only way i can shut down is to remove battery it han never done this before now hope you can help me with this problem
thx Sean
thx Sean