286 questions
Клавиатура
Здравствуйте только купил клавиатуру Hyperx Alloe Fps Pro, где то час все было хорошо, потом клавиатура сама стала нажимать кнопки кнопка q работала как tab , потмо была ошибка что usb не видит код 43, подключил ее в другой порт, опять нажимает что хочешь, сайты открываются и тд, перезагрузил компьютер с включенной клавиатурой не загорался даже экран, без нее все хорошо, что делать?
Греется жесткий диск
Последнее время стал сильно греться жесткий диск хотя запустил комьютер 20-30 минут назад, а уже хоть руки грей
My dispay turned pink
Hello, my display turned pink. I wonder if it is due to Auslogics activity. Can u help me resolve this? I am using Asus Laptop X505Z
DNS SERVER NOT WORKING
TROUBLE shoot then it say configeration correct but have dns server not responding and not getting the speed of 400mb I'm paying for.
Проблема с HDD диском
Доброго времени суток. у меня случается проблема с жестким диском (seagate barracuda 1TB), при работе прогрмм находяшихся в нем, он часто вылетает. Замена сата порта и сата кабеля не помогает. Диск относил в сервес центр, говорят исправен. Помогает только ваша программа Auslogics boostSpeed, но помогает где то только на месяц пользования компьютером. Что мне делать?
Missing Printer Driver in Device Manager
Hello-
I'm not sure if this was the cause after running scans, but the 'Printer Driver' listed in the Device Manager has disaapeared. How to I get it back? I tried reinstalling the HP drivers the Printer Driver listed is still not there. I have 'Image Devices' listed with the HP Scanner driver listed (but nothing else). I have attached a pix of my Device Manager.
Thank you
Steven
I'm not sure if this was the cause after running scans, but the 'Printer Driver' listed in the Device Manager has disaapeared. How to I get it back? I tried reinstalling the HP drivers the Printer Driver listed is still not there. I have 'Image Devices' listed with the HP Scanner driver listed (but nothing else). I have attached a pix of my Device Manager.
Thank you
Steven
Printer Interference
My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
graphics card
what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
Something happen to this device after i ran internet optimization
Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
Cross mark on wifi symbol
This happens sometimes . When i on the laptop there is a red cross mark on wifi button and when i on the wifi it doesnot detect any network . But after I off and on the aeroplane mode and the system a lot of times it goes off . It is not related to the function key which disables it as i tried it .
USB-C Gigabit Ethernet Mini Adapter does not indetify network
I have just purchased a USB-C Gigabit Ethernet Mini Adapter and I cannot connect to the internet with it. The device connects to my computer and is recognised, but it says "Unidentified Network" and underneath "No Network". My machine uses Windows 10. Can you help fix this problem?
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
Graphics Card
The results of the "Maintain" application suggested that I upgrade my card from 8.1 to 9.0 and above. How do I do this?
Диск содержит ошибки
При сканировании Disk Doktor пишет что диск C содержит ошибки но при исправлении и глубоком исправлении все равно пишет диск содержит ошибки. Другие программы Auslogics пишут что все диски впорядке. Это ошибка программы или что ?
SSD Defrag Process
I use a Dell Latitude with an SSD drive. I note that some people recommended that the SSD should not be defragged as it can cause unnecessary wear and tear which will reduce its life span. Every time I run Boot speed it attempts to defrag the SSD. Two questions – (1) Does it really shorten the life of a SSD if it is defragged on a regular basis and (2) If I chose not to defrag how I stop this from happening other than every time manually untick the defrag box prior to hitting the “resolve all” button.
Many thanks in advance for your response.
Disengaged Microphone
I performed some of the scans and tweaks, which resulted in my system's microphone being disengaged. How can I re-engage the microphone that I need for my webinars.
Tastatur nicht Erkant
Windows 10 Bennent meiner Tastaturtreiber nicht richtig,dann Arbeitet Tastatur nicht mehr.
Дефрагментация SSD и дефрагментация реестра при загрузке в компъютере с SSD.
1. Почему программа начала дефрагментировать компъютер с диском SSD, хорошо ли это (вроде ему нужна только оптимизация), и если нет, как отключить дефрагментацию SSD ?
2. Хорошо ли делать дефрагментацию реестра при перезагрузке компъютера с SSD ? (Меня фсегда очень интересовал этот вопрос).
Заранее спасибо.
2. Хорошо ли делать дефрагментацию реестра при перезагрузке компъютера с SSD ? (Меня фсегда очень интересовал этот вопрос).
Заранее спасибо.
Speech Recognition in Word
Hi,
I am not able to set up Speech Regocntion or dictate.
What do I need to do? Keep getting language recognition dialogue although everything says it is set to English (UK).
Best,
Adrian
Активация
После ввода ключей не активируются программы: BoostSpeed 12, Driver Updater, Anti-Malware. Появляется сообщение, что программа активирована, но программа не активируется и предлагает снова активировать программу. Пробовал несколько раз, перезагружал систему, но ничего не помогает.
Пропал сигнал микрофона
ПОсле установки программы и первоначального сканирования программа запроила перезагрузку. ПОсле перезагрузки сигнал от микрофона пропал. Ни приложения, ни само ОС не может получить от него сигнал. Хотя при поиске проблем через настройки ничего не обнаруживается.
False alarms
I have this problem for many years now and I cannot find out what’s happening. When I start Windows, I hear a number of times the ding dong sound of hardware that is connecting and disconnecting. When I look into the Control Panel > Devices and printers, I see an icon showing up and disappearing. The label says: Unknown USB device (Device Descriptor Request failed). I checked all hardware connected to the PC more than once and for each piece of hardware there’s is an icon in the Control Panel. So I really don’t know to which piece of hardware this additional icon is related. After about 20 ding dongs, the sounds stops by itself. Sometimes this issue has gone for some time, but it returns as suddenly as it has been gone.
Any comment on this issue would be appreciated.
I made a .nfo file, but I cannot attach this file to this request form.
Any comment on this issue would be appreciated.
I made a .nfo file, but I cannot attach this file to this request form.
The JBL connected with Bluetooth Properly where in the sound output of windows 10 it does not appear
Hello
I conntected with Bluetooth the device - Speaker JBL Flip 5 (bluetooth connection only). It appear in the the Setting / bluetooth Devices of Windows 10
But in the setting of Windows 10 the device does not appear so I can not use it.
You gave me for the same quesion an answer for old windows (8) and for headset. I donot have Playback in the setting...
I tried to replace the driver, to update my windows 10 and restart,....It does not help
I'll be glad to have the right solution
thanks Dr. moti Leibowitz
I conntected with Bluetooth the device - Speaker JBL Flip 5 (bluetooth connection only). It appear in the the Setting / bluetooth Devices of Windows 10
But in the setting of Windows 10 the device does not appear so I can not use it.
You gave me for the same quesion an answer for old windows (8) and for headset. I donot have Playback in the setting...
I tried to replace the driver, to update my windows 10 and restart,....It does not help
I'll be glad to have the right solution
thanks Dr. moti Leibowitz
Connected to Bluetoothe Cannot see in the Sound of Windows 10
I connected the Speaker JBL Flip5 to the Bluetooth and it is written in the setup of Windows 10 - Connected
I go to soundin Setup of Windos 10 to switch to JBL Flip 5 and it is does not appear.
So I can not use the JBL Speaker
Thanks a lot
Dr. Moti Leibowitz
I go to soundin Setup of Windos 10 to switch to JBL Flip 5 and it is does not appear.
So I can not use the JBL Speaker
Thanks a lot
Dr. Moti Leibowitz
Windows 11 Doesn't Hibernate on Alienware and HP Probook Laptops Anymore
I have two laptops, one an Alienware and the other an HP Probook, on which I have installed Boostspeed 13. Since installing on both PCs, neither hibernates anymore. They both sleep appropriately, but they don't hibernate. This was never an issue with Boostspeed 12. What has changed with the new software and how can I re-enable hibernation on both?
computer shuts off
My computer unexpectandlty shuts off after 15 minutes. I check the cpu usage and its low. Not sure if the system is overheating.
How to upgrade a graphics card
According to Auslogics Tweak Manager my graphics card needs a upgrade
My graphics performance is at 5.1 and the average sytem performance is 7.5.
How do I upgrade my graphics card?
My graphics performance is at 5.1 and the average sytem performance is 7.5.
How do I upgrade my graphics card?
Boost Speed doesn't recognize SSD
Hey guys,
Boost Speed doesn't recognize SSD and claims that it is HDD. Yes, I am sure it is SSD, all other software recognizes it as SSD (programs like Speccy, etc.).
How can this be fixed?
Thanks.
John
Boost Speed doesn't recognize SSD and claims that it is HDD. Yes, I am sure it is SSD, all other software recognizes it as SSD (programs like Speccy, etc.).
How can this be fixed?
Thanks.
John
Disk Defrag e hard disk da 6 Tb
Non riesco a deframmentare un hard disk da 6 Tb che è fermo al 72%.
Ho comprato la licenza credendo fosse quello ma non è successo niente.
Cordiali saluti
Guglielmo Cesari
Ho comprato la licenza credendo fosse quello ma non è successo niente.
Cordiali saluti
Guglielmo Cesari
パソコンが熱い
パソコンの動作が遅く、動作音も大きくなり、パソコンの排気がとても熱くなって心配です。デフラグやクリーンアップすると少しの間静かになります。問題ないのでしょうか。また、どうすればいいですか?パソコン自体は5年目です。
подключение устройства
При подключении ASMT USB 3.0 Destop H SCSI Disk Device система то видит его, то нет: предлагает отформатировать или обновить драйвер (обновила драйвер тома файловой системы WPD). Как сделать этот диск рабочим не отключая его от ПК (каждый раз монтировать и размонтировать...)?
! не видела данного устройства в выпадающем меню, выбрала другое...
! не видела данного устройства в выпадающем меню, выбрала другое...
Notification about cleaning browser cache
Hi,
I get notifications that I need to clear my browser cache.
What is the best action to do so in Boostspeed 13?
I get notifications that I need to clear my browser cache.
What is the best action to do so in Boostspeed 13?
Computer shutting off
My computer has been randomly shutting off. I sent it to IT at school and they put a new battery and motherboard in but that hasn't fixed it, it rarley happens when I am at home, mostly when I am at school. How do I fix it?
TouchPad does not work after go to Windows 11
I have Lenovo Yoga C940-15IRH and the touchpad does not work
It worked with windows 10.Now in Windows 11 nothing work.
I tried to uninstall the driver and to update Windows. does not work
Thanks a lot
Moti
It worked with windows 10.Now in Windows 11 nothing work.
I tried to uninstall the driver and to update Windows. does not work
Thanks a lot
Moti
come fare puòizia nella sezione servizi
Come abolire o disabilitare i servizi poco utili? C'è un sistema in automatico? Grazie.