El teclado salta atrás al escribir
When typing it is as if the keyboard were pressing only the tab, and other than that it sometimes only moved backwards. A few words back. That happens after having the computer turned on for a while, that is, it does not turn on that way. As time passes, it starts with that situation of going only words back when typing or leaving the current text box as if pressing tab.
problem after running resolve all issues early this morning
I2C
What can you tell me about I2C This device cannot start. (Code 10).
I have tried many fixes with no success.
This is the Touch Screen driver in an HP Envy 360.
Thanks.
George Jamison
computer not turning on
cpu fan not spnning but other fan are spinning
i cleaned the fan but also not spinning
I tried other cpu fan but also not spinning
cannot boot into the windows
I would like to have some feedbag and your thoughts about(( Aspire V3-771-32328G75Makk))
Well this 8 years old laptop runs really smooth especially after i cleaned the fan. have learned alot about the hardware.
But.. i would like to play some games on it but there seems a problem with my videocard because intel dont support it anymore since windows 10. the questions are:
Can i upgrade this videocard?
Should i replace the Intel core i3-2328m cpu @ 2.20ghz to the I7 ?
And ifso yes is it worth it since the cost of hardware i need to buy then..
Sorry for the bad english.. (From Holland)
Kind regards!
https://tweakers.net/pricewatch/327051/acer-aspire-v3-771-32328g75makk/specificaties/
Загрузка с SSD
Кое как удалось установить windows 10 на SSD. но при первой же перезагрузке с него не загрузиться никак.
В меню загрузок F9 есть выбор ситем вин 8,1 том1, вин 8,1 том 6 и вин 10, но при выборе вин10 произходит перезагрузка и все заново. В биосе P8Z77-V LX2 (ver. 2501) этот SSD(GPT,NTFS) не виден.
Прошу о помощи!
registrazione su un terzo compiuter
Attualmente ne ho solo due e non riesco a collegarmi al terzo che non è mio ma di un mio collaboratore
Print spooler issues
My computer keeps dropping its print spooler. I reload windows and it works until I install Auslogics Speed Booster. Any fixes?
On the subject of Devices
Yes I have tried the sugestions you mentioned in the previous answer. Problem is, do I have to remember to Unchek the devices every time I do click on the maintenance button and undue again and again?
Problemas de apagado
Buenos dias. Mi Pc no apaga quedan encendido el ventilador de mi fuente de poder y el led del monitor. Gracias por su colaboracion
speaker icon
after todays update the sound icon when clicked upon appears ok but as soon as the mouse is moved to adjust the sound the icon disappears
What can I do to bring it back to normal?
By the way: the subcategory is too limited to direct the problem to the right technician in the correct dept.
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
keyboard is working intermittently
I did some tweaks using Aulogics BoostSpeed 11. My keyboard is now working intermittently, but I'm not sure what tweak may have caused that. I will be typing and it will just stop recording my keystrokes for a few seconds, so I have to wait for a few seconds until the keyboard starts responding again. I have a new HP Envy laptop. Any suggestions? Thanks a lot.
p.s.: on the dropdown above for device, it gave me four options. I just selected what I think is the right one
built in Dell Inspiron laptop Realtek microphone
My microphone has stopped working and doesn't seem recognised ny Windows 10. Zoom is displaying a picture rather than video.
Windows 10 Disc Optimizer
I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.
Smart Card Service
I have encountered the problem with Smart Card Service turning off. And I am actually using a smart card. I keep opening Services menu in windows and turning it on again. (Auto/manual no matter) It works then, but the next day it will be the same issue over and over again.
I suspect that BoostSpeed is turning it off as a matter of "optimisation". Who can I check and make it stop? I need this service running.
Best Regards, Dmitry
Lost partition
My disk had a C: drive, for OS and D: drive for my files, photo's etc. While the c: drive was recovered, the d: drive has disappeared. How can I recover the D: drive, please?
Monitor no responde
POSSIBLE CONTRADICTION
Brightness
Laptop ASUS 2021 ROG Strix G17 G1713QR
Touch Screen Monitor
Активация
Windows 10 install software as admin
El teclado de mi laptop no funciona
Compre la lic de BOOTSPEED y tambien la licencia de DRIVER UPDATER
Cuando actualizo los drivers ya no funciona ningun teclado
Esto ya me sucedio dos veces y esta es la tercera ocasion
Necesito me ayuden a resolverlo
Para redactar este correo estoy utilizando el teclado en pantalla
Bluetooth não conecta após usar softwares Auslogics
Extremely Slow
partition unable to delete
RAM is getting full most of the time
I have an 8GB RAM and getting full most of the time.
Is there a way or app that can auto optimize my RAM?
Looking forward to your reply.
Many thanks!
Regards,
Mark
No Sound
Boost Speed doesn't recognize SSD
Boost Speed doesn't recognize SSD and claims that it is HDD. Yes, I am sure it is SSD, all other software recognizes it as SSD (programs like Speccy, etc.).
How can this be fixed?
Thanks.
John