Постоянная загруженность диска на 100%
Добрый день!
Диск постоянно работает на 100% в диспетчере задач, что замедляет работу системы
В чем может быть проблема?
Перестали работать порты
Трещит в простое
HDD WD Purple 6 TB, во время работы видет себя тихо, даже если на него что-то скидываю или с него воспроивожу (ну или вообще, хоть что-то делается на компе, абсолютно все что угодно = треска нет)
Если комп стоит несколько минут без дела, то HDD начинает трещать
Стоит мне хотя бы мышку сдвинуть, треск исчезает
Как это устронить?
eliminazione di windows obsolete
Software Problems with Printer
Hi! Everytime that I run Auslogics, that scans my computer for errors, cleans websites, etc.), my printer stops connecting properly with my computer. It appears that it affects the drivers. I have to clean out the printer, reinstall, etc., that takes a great deal of time. Your program speeds up my computer, which is great. But this repeated problem with my printer is a serious issue. Is there anything that I can do to stop this problem. You might need more information to solve the issue. I am happy to provide it.
Клавиатура
Греется жесткий диск
My dispay turned pink
DNS SERVER NOT WORKING
Проблема с HDD диском
Missing Printer Driver in Device Manager
I'm not sure if this was the cause after running scans, but the 'Printer Driver' listed in the Device Manager has disaapeared. How to I get it back? I tried reinstalling the HP drivers the Printer Driver listed is still not there. I have 'Image Devices' listed with the HP Scanner driver listed (but nothing else). I have attached a pix of my Device Manager.
Thank you
Steven
Printer Interference
graphics card
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
Cross mark on wifi symbol
USB-C Gigabit Ethernet Mini Adapter does not indetify network
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
Graphics Card
Problemas de apagado
Buenos dias. Mi Pc no apaga quedan encendido el ventilador de mi fuente de poder y el led del monitor. Gracias por su colaboracion
Brightness control not working
Headphones connected but no sound
Screens Blacks Out (Stops Displaying on Minor Electricity Surges from Fridge-Freezer)
100% disk usage shown in windows 10
i have tried all the videos in youtube but task manager continuously shows 100% disk
which slows down computer startup increasing boot time
what should i do?
I would like to have some feedbag and your thoughts about(( Aspire V3-771-32328G75Makk))
Well this 8 years old laptop runs really smooth especially after i cleaned the fan. have learned alot about the hardware.
But.. i would like to play some games on it but there seems a problem with my videocard because intel dont support it anymore since windows 10. the questions are:
Can i upgrade this videocard?
Should i replace the Intel core i3-2328m cpu @ 2.20ghz to the I7 ?
And ifso yes is it worth it since the cost of hardware i need to buy then..
Sorry for the bad english.. (From Holland)
Kind regards!
https://tweakers.net/pricewatch/327051/acer-aspire-v3-771-32328g75makk/specificaties/
On the subject of Devices
Yes I have tried the sugestions you mentioned in the previous answer. Problem is, do I have to remember to Unchek the devices every time I do click on the maintenance button and undue again and again?
Disco duro se encuentra al 100%
Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?
Дефрагментация SSD и дефрагментация реестра при загрузке в компъютере с SSD.
2. Хорошо ли делать дефрагментацию реестра при перезагрузке компъютера с SSD ? (Меня фсегда очень интересовал этот вопрос).
Заранее спасибо.
Double Clicking
Lately (last several weeks) the vast majority of my on-screen selections require a 'double click' on the mouse in order for advancing. How can I correct this so movement on-screen can be accomplished with just a single click on the mouse? Could this be an associated problem with Boostspeed's notice of "Hish system resource usage detected' and I "might experience extreme PC slowdown"?
Диск содержит ошибки
I am not getting full gigabit speed on only my computer.
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
speaker icon
after todays update the sound icon when clicked upon appears ok but as soon as the mouse is moved to adjust the sound the icon disappears
What can I do to bring it back to normal?
By the way: the subcategory is too limited to direct the problem to the right technician in the correct dept.
Print spooler issues
My computer keeps dropping its print spooler. I reload windows and it works until I install Auslogics Speed Booster. Any fixes?
Printer not connecting
I recently used Auslogics to clean my computer. I believe I went to "optimize" to perform a deeper clean up. The question came up at the end to clean which I clicked on. My printer is now showing default, I cannot get it to connect to my internet either by the "wizard" or manually. HELP!!!