problem after running resolve all issues early this morning
I2C
What can you tell me about I2C This device cannot start. (Code 10).
I have tried many fixes with no success.
This is the Touch Screen driver in an HP Envy 360.
Thanks.
George Jamison
computer not turning on
cpu fan not spnning but other fan are spinning
i cleaned the fan but also not spinning
I tried other cpu fan but also not spinning
cannot boot into the windows
I would like to have some feedbag and your thoughts about(( Aspire V3-771-32328G75Makk))
Well this 8 years old laptop runs really smooth especially after i cleaned the fan. have learned alot about the hardware.
But.. i would like to play some games on it but there seems a problem with my videocard because intel dont support it anymore since windows 10. the questions are:
Can i upgrade this videocard?
Should i replace the Intel core i3-2328m cpu @ 2.20ghz to the I7 ?
And ifso yes is it worth it since the cost of hardware i need to buy then..
Sorry for the bad english.. (From Holland)
Kind regards!
https://tweakers.net/pricewatch/327051/acer-aspire-v3-771-32328g75makk/specificaties/
Загрузка с SSD
Кое как удалось установить windows 10 на SSD. но при первой же перезагрузке с него не загрузиться никак.
В меню загрузок F9 есть выбор ситем вин 8,1 том1, вин 8,1 том 6 и вин 10, но при выборе вин10 произходит перезагрузка и все заново. В биосе P8Z77-V LX2 (ver. 2501) этот SSD(GPT,NTFS) не виден.
Прошу о помощи!
registrazione su un terzo compiuter
Attualmente ne ho solo due e non riesco a collegarmi al terzo che non è mio ma di un mio collaboratore
Print spooler issues
My computer keeps dropping its print spooler. I reload windows and it works until I install Auslogics Speed Booster. Any fixes?
On the subject of Devices
Yes I have tried the sugestions you mentioned in the previous answer. Problem is, do I have to remember to Unchek the devices every time I do click on the maintenance button and undue again and again?
Problemas de apagado
Buenos dias. Mi Pc no apaga quedan encendido el ventilador de mi fuente de poder y el led del monitor. Gracias por su colaboracion
speaker icon
after todays update the sound icon when clicked upon appears ok but as soon as the mouse is moved to adjust the sound the icon disappears
What can I do to bring it back to normal?
By the way: the subcategory is too limited to direct the problem to the right technician in the correct dept.
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
keyboard is working intermittently
I did some tweaks using Aulogics BoostSpeed 11. My keyboard is now working intermittently, but I'm not sure what tweak may have caused that. I will be typing and it will just stop recording my keystrokes for a few seconds, so I have to wait for a few seconds until the keyboard starts responding again. I have a new HP Envy laptop. Any suggestions? Thanks a lot.
p.s.: on the dropdown above for device, it gave me four options. I just selected what I think is the right one
built in Dell Inspiron laptop Realtek microphone
My microphone has stopped working and doesn't seem recognised ny Windows 10. Zoom is displaying a picture rather than video.
Windows 10 Disc Optimizer
I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.
Система пишет , что принтер не подключен
Problemas de apagado
Buenos dias. Mi Pc no apaga quedan encendido el ventilador de mi fuente de poder y el led del monitor. Gracias por su colaboracion
Brightness control not working
Headphones connected but no sound
Screens Blacks Out (Stops Displaying on Minor Electricity Surges from Fridge-Freezer)
100% disk usage shown in windows 10
i have tried all the videos in youtube but task manager continuously shows 100% disk
which slows down computer startup increasing boot time
what should i do?
I would like to have some feedbag and your thoughts about(( Aspire V3-771-32328G75Makk))
Well this 8 years old laptop runs really smooth especially after i cleaned the fan. have learned alot about the hardware.
But.. i would like to play some games on it but there seems a problem with my videocard because intel dont support it anymore since windows 10. the questions are:
Can i upgrade this videocard?
Should i replace the Intel core i3-2328m cpu @ 2.20ghz to the I7 ?
And ifso yes is it worth it since the cost of hardware i need to buy then..
Sorry for the bad english.. (From Holland)
Kind regards!
https://tweakers.net/pricewatch/327051/acer-aspire-v3-771-32328g75makk/specificaties/
On the subject of Devices
Yes I have tried the sugestions you mentioned in the previous answer. Problem is, do I have to remember to Unchek the devices every time I do click on the maintenance button and undue again and again?
Disco duro se encuentra al 100%
Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?
Дефрагментация SSD и дефрагментация реестра при загрузке в компъютере с SSD.
2. Хорошо ли делать дефрагментацию реестра при перезагрузке компъютера с SSD ? (Меня фсегда очень интересовал этот вопрос).
Заранее спасибо.
Double Clicking
Lately (last several weeks) the vast majority of my on-screen selections require a 'double click' on the mouse in order for advancing. How can I correct this so movement on-screen can be accomplished with just a single click on the mouse? Could this be an associated problem with Boostspeed's notice of "Hish system resource usage detected' and I "might experience extreme PC slowdown"?
Диск содержит ошибки
I am not getting full gigabit speed on only my computer.
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
speaker icon
after todays update the sound icon when clicked upon appears ok but as soon as the mouse is moved to adjust the sound the icon disappears
What can I do to bring it back to normal?
By the way: the subcategory is too limited to direct the problem to the right technician in the correct dept.
Print spooler issues
My computer keeps dropping its print spooler. I reload windows and it works until I install Auslogics Speed Booster. Any fixes?
Printer not connecting
I recently used Auslogics to clean my computer. I believe I went to "optimize" to perform a deeper clean up. The question came up at the end to clean which I clicked on. My printer is now showing default, I cannot get it to connect to my internet either by the "wizard" or manually. HELP!!!