371 questions

ваш деинсталятор не удаляет эту программу

у меня ауслоджик про, платная версия. ваш деинсталятор не удаляет bluestacs.
522 views
Jul 05, 2022 at 04:10 PM

PC slows down after a period of being on, following re-boot.

This has happened a while (over a year): I leave my PC on 24/7 to get updates, etc.

After I re-boot it works fine but several hours or perhaps a day later, the PC slows down and re-quires another re-boot.

I just noticed today, after upgrading to V 12.3.0.1 that, although it still slows down, I selected the Disable BoostSpeed instead of leaving BoostSpeed running in the background, and the PC immediately sped up to normal! This is the first time I have tried that.

Have you run into this anomoly before and/or do you have a fix for this?

Many thanks!
460 views
Jun 30, 2022 at 06:08 PM

Ошибка при обновлении "Google Chrome"

Здравствуйте, подскажите, пожалуйста, как устранить ошибку при обновлении браузера "Google Chrome" без его переустановки?
558 views
Jun 26, 2022 at 01:26 PM

Notifications

I use Bitdefender VPN for anonomous web usage on my Windows 10 desktop computer. I connect to the internet using a USB wifi adapter. Last week the program updated. Now everytime I connect I get a message from BoostSpeed 12 about an attempt to change DNS detected. The next line states- Adapter:TAP Windows Adapter v9. The next line states-Value: 198.51.100.1
How do I stop getting this particular notification without stopping all notifications?

Thanks
T. Kinstler
mitland@aim.com
587 views
Jun 15, 2022 at 08:48 PM

About BoostSpeed

Sorry about the bogus Subcategory- apparently I cannot send without one but BoostSpeed is not listed.
I want to set the program so that it does NOT wipe form-fill information from Firefox. I have been cruising through the settings but I don't see a way to do it.
476 views
Jun 05, 2022 at 09:12 PM

mistakes

Why does ABBYY FineReader 14 make mistakes in characters when scanning large and clear printed text without interference?
465 views
Jun 05, 2022 at 09:06 PM

Removing all traces of google from windows

Is there an efficient way of removing all things (every mention of) Google from my sysem, preferably using your products?

In the pase I have gone through the registry line-by-line and removed anything that says "Google," "Chrome," or "android." this takes a long time and is teadious but I am usually successful in keeping Google out of my life.
438 views
Jun 04, 2022 at 02:26 PM

Location is turned off and GREYED OUT.

Everytime I install BoostSpeed 12, in Windows the Location services on Windows 11/10 are greyed out automatically in the Operating System due to the presence of this third-party software. Due to this glitch, I am not able to toggle the Location services on and off and also cannot change any settings related to it. I have tried every hack and registry fix that Microsoft tells me to do and still nothing...location is GREYED OUT
690 views
May 31, 2022 at 12:23 PM

Auslogics BoostSpeed

Game Mode...como ativar?
566 views
May 17, 2022 at 05:50 PM

How to 100% Improve This Software

this software can be made better but it is missing a lot of feutures
These are the feutures i would like you guys to add to your'e program to make it 100x usefull and better
add settings for auto ram cleaner (Can adjust when to clean ram automatically)
add HyperBoost which 'Avira System Speedup' Uses To Extend System startup
Add Best antivirus Engine
Add Anti Fragmentation And Cpu Cores Unlocker And More like (system mechanic)
Add 1 Click Maximum Pc Boosting Like (Pgware Game Boost)
Add turbo booster and game booster for pc's with High cpu usage or high ram usage.
add Performance Monitor,
please add Password generator for the software that generates random password for people who is tryna create password
PLEASE ADD (ULTIMATE WINDOWS BOOSTER FOR LOW END PC'S) To Completely Boost pc And Delete ALL Junk Files Used by windows And PC OPTIMIZER LIKE OTHER SOFTWARES
There Are Optimizations That can Happen Using Commands or Registry for Computer Which optimizes windows registry by changing it's settings and optimizes hard drive responsiveness could you guys add those in your software? make a category called (Optimize Settings) for Full system scan and add those optimizations to them
Thank you.
695 views
May 11, 2022 at 01:46 AM

reports not working

reports does not do anything. I generate a system report, and view report does not do anything
460 views
May 07, 2022 at 09:18 PM

Unintalled software packahe

I only use mu PC for flight simulation practive. Iecently uninstalled a program called Traffic Global. IT contined over twelve thousand files. Every time I run the Duplicate Filesprogram, the files continue to show up although I removed Traffiv Global weeks ago. Can you advise? Thanks!

Jack Sullivan
533 views
May 07, 2022 at 01:28 AM

Cartel que aparece cada vez que enciendo la CPU.

Hola. No lo manejo al programa como corresponde, pero tengo un problema que no me lo resuelve. Cada vez que prendo la CPU, aparece un cartel del antivirus de windows 11, que no lo puedo sacar. Me pueden orientar?
469 views
May 04, 2022 at 04:50 PM

display driver

card: geforce rtx 2060. During a recent driver update that failed the old nvidia driver was replaced by the basicdisplay.sys driver and my card is no longer even recognised by my system. Nvidia driver update fails. i've tried every fix listed, nothing works. Windows update fails with the 0x800703f1 error for everything now. You own driver updater now hangs at connecting to the cloud. I even tired a manual instal. that failed as well. How can i reinstall a display driver?
480 views
Apr 29, 2022 at 01:45 AM

Architecture X64 Auslogiscs

Hello, may I ask you how can I download x64 bit software auslogics bootspeed 12 ?

Best regards,
Doniel H.
548 views
Apr 28, 2022 at 04:04 AM

letters are very thin -hard to read

Dear Sir/Madam
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web

How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear

Thank you
Andreas Y
482 views
Apr 17, 2022 at 09:46 AM

BoostSpeed wipes out VS2022 install data

Whenever I run the Boostspeed scan it wipes out all indication of my VS2022 installation. After the Boostspped run Visual Stuio VS2022 installer states there is nothing installed. Must restore with backups.

Please advise.

485 views
Apr 12, 2022 at 12:02 AM

doublons

Bonjour , existe-t-il un logiciel (facile) , pour éliminer tous les doublons automatiquement ( sans cocher toutes les cases de tous les doublons ) . Merci , cordialement

511 views
Apr 11, 2022 at 08:14 AM

suppression des fichiers en double (copies)

Bonjour, je souhaite supprimer avec votre logiciel les fichiers en double
Quelle est la marche à suivre ?
merci de votre aide
André
467 views
Apr 02, 2022 at 12:16 PM

rendre les textes plus lisibles

Comment augmenter la grosseur des caractères, pour les rendre plus lisibles.
506 views
Apr 01, 2022 at 01:10 AM

何回cleanningをおこなってもデフラグや調整項目がある

PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
439 views
Nov 27, 2022 at 09:49 AM

Removing all traces of google from windows

Is there an efficient way of removing all things (every mention of) Google from my sysem, preferably using your products?

In the pase I have gone through the registry line-by-line and removed anything that says "Google," "Chrome," or "android." this takes a long time and is teadious but I am usually successful in keeping Google out of my life.
438 views
Jun 04, 2022 at 02:26 PM

New Problem Notifiction

Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
434 views
Nov 27, 2022 at 08:25 PM

Notices

I am the target of a very vicious hacker. A short time ago I receieved a notice from Auslogics of a new file that had recently been added into my system. I checked to understand more, then deleted it. However, I was lucky to see this notice. If I am away from my desk and a notice pops up I may miss it. How can I keep track of notices you send so I can circumvent any threats?
434 views
Dec 29, 2022 at 12:17 AM

le van hoa

sao khong kich hoat kye duoc
429 views
Dec 31, 2022 at 09:21 PM

SYSTEM SCAN

I have boostspeed 13 Pro. When I do a system scan, the results come back so many mb deframented, etc. But when I resolve, it only clean sonme of them. Maybe 10 mb less. It cleans less on defrag and junk. If i scan again, it cleans all. Why should I have to do it twice? Also, can I set up system scan to be automatically done? And if I can, how do I do it? Please advise.

Thank You,

Doug
gambichler5@aol.com
426 views
Dec 15, 2022 at 09:38 PM

Slow startup

Good day, old person here.....

I am using Windows 10, do I need both Google Chrome AND Microsoft Edge? I sometimes receive a message from Auslogics saying I may have a privacy issue and that I should look at my privacy settings... but as there is no indication of what the privacy setting should be or what has changed, I don't know what I am supposed to be checking.

Patience and any help offered would be much appreciated!

Thanks & regards
Jacqueline Collier
423 views
Dec 27, 2022 at 09:45 AM

BoostSpeed 13 BUG Issue

There is an aggravating "BUG" in BoostSpeed 13. A message frequently appears that states I have many TERABYTES of files in my Recycle Bin. See the attached screenshot.

I got this message today, while having less than 25 MB of files in my Recycle Bin.

Please look into this and fix this BUG.

Thank you.

Myron Achtman

Content hidden to protect privacy

418 views
Feb 25, 2023 at 07:12 PM

作業終了時に下記内容が表示されます

作業終了時に下記内容が表示されます
「いくつかの調整を有効にするため、コンピュ-タを再起動するする必要があります。」
どうすれば、改善するのですか。
411 views
Feb 21, 2023 at 07:13 AM

UPDATE

Hi.
When I see the mesage in my laptop: " You can upgrade" to 13.0.0.2. Visit our web page.
I go to this web and I download the file that you have there.
I install this file, but I can't have the new version.
Could you guys help me?

Thanks
406 views
Dec 11, 2022 at 04:04 PM

icon in system tray

auslogics tray icon has an x through it. why?
401 views
Oct 17, 2022 at 05:02 AM

automatic

bonjour je aimerais automatic maintenance fasse registry cleaner
399 views
Dec 15, 2022 at 08:15 PM

My ETS5 still crashes

My ETS5 still crashes upon opening. Is there some function in the registry cleaner that I have overlooked?
399 views
Oct 03, 2022 at 10:37 AM

Auslogic 13 update problem

Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
398 views
Nov 29, 2022 at 10:53 PM

Angy Birds

Wie bekomme ich Hyper V auf Lenovo ThinkCentre MT-M9622-CTO
398 views
Dec 06, 2022 at 03:31 PM

Intel Graphics Installer Not Prompt Back After Loading For Install

Dear Sir /Madam,

I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
397 views
Aug 31, 2023 at 02:54 AM

Bluetooth driver

When I bought this I ran a scan and was using my wireless mouse after the scan I was unable to use my mouse. Would this software delete my driver if so how would I get it back?
395 views
Sep 26, 2022 at 03:40 AM

System Tray Icon Never Loads

I recently purchased Auslogics BoostSpeed 12 and I’m running it on Windows 10 VM, the user is a Standard user without any Administrative Privileges. This brings me to the question! Can this Standard user turn on the computer and BoostSpeed 12 loads and runs automatically including scheduled maintenance?
It looks as though all is fine until I restart the computer however, it’s not, the system tray icon never loads until I start the application manually, and before it loads an administrative Password is required. Is this normal and If so is there a workaround?
393 views
Oct 28, 2022 at 09:51 PM

Never updates any drivers for two years now...

I do NOT want to uninstall Driver Updater. I want it to work and it has never updated a single driver, yet.
391 views
Dec 15, 2022 at 02:57 PM

Clearing Privacy History issues

Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!

Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.

the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.

Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).

What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.

Cool?
390 views
Apr 24, 2023 at 01:11 PM