376 questions
Problem mit dem Optimieren in Disk Defrag 11
Ich habe eine Festplattenpartition, in der die Files über den gesamten Bereich verstreut sind, mit großen Lücken dazwischen. Bei Benutzung der Option "Defragmentieren und Optimieren" in der bei Auslogics gekauften Version Disk Defrag 11 steht der Rechner praktisch. Die Optimierung eines einzelnen kleinen Files dauert Minuten. Die Defragmentierung dagegen läuft normal. Da ich die Kaufversion wegen der Optimierungsoption erworben habe, bitte ich um eine Antwort, wie dieser Fehler beseitigt werden kann.
Ich benutze Windows 10, 64 bit.
Ich benutze Windows 10, 64 bit.
file recovery
I`ve recently done a deep scan with boost speed 13 which resulted in me losing all my download files from the users file. I`ve tried recovery several times using different restore points without any success. I ran advanced recovery software which tells me they have to be saved to another location. Selected drive D but still don`t see them. Is there any way i can recover my downloads with boost speed 13. ?
remarque
je ne sais pas si la question est déjà posée ou non, mais voilà ma question.
Je crois que ce sera plus rapide pour l'utilisateur si vous ajoutez un champ de recherche sur le tableau de bord (dashboard) pour acceder plus rapidement à un sous menu du logiciel.
Merci d'avance pour votre réponse.
Mes salutations.
Je crois que ce sera plus rapide pour l'utilisateur si vous ajoutez un champ de recherche sur le tableau de bord (dashboard) pour acceder plus rapidement à un sous menu du logiciel.
Merci d'avance pour votre réponse.
Mes salutations.
Can I download any of your software on trial basis?
Hi,
Presently I am on trial bases using Auslogics Registry Cleaner 10.
My question is simple. Can I download and install any of the software you offer on a trial basis and if yes please tell me how.
I am mostly curious about the computer speed up app version #13...
Thank you kindly-
Jackson
Presently I am on trial bases using Auslogics Registry Cleaner 10.
My question is simple. Can I download and install any of the software you offer on a trial basis and if yes please tell me how.
I am mostly curious about the computer speed up app version #13...
Thank you kindly-
Jackson
Auslogics Driver Updater should I cancel or wait for installation to finish?
I am trying to update my Nvidia GeForce GTX 960 driver via Auslogics Driver Updater and it's taking a very long time to install. I began the process yesterday (29/03/24) at around 7pm and expected it to take a long time to back-up the old driver setting and then download the new driver. I've come back to my computer at 30/03/24 at 1pm and it is still installing.
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Auslogics BoostSpeed が上手く使えません
マイクロソフトのエッジが邪魔をして、「稼働中のプログラムを全てを終了する」という機能が、突然使えなくなって、これを「手動で終了させよ」との文字が出ますが、出来ません。方法をご教示ください。また、何故、今までスムーズに出来ていたのに、何か私が間違えた設定をしてしまったのでしょうか?
impossible de supprimer adobe acrobat cause FullTrustNotifier.exe
bonjour,
Comment supprimer adobe acrobat reader ensachant que lorsque je commence la procedure, il stoppe la uninstall car fullTrustNotifier.exe n'est pas marque comme installé, j'ai pourtant desactive le Adobe genuine notifier dans les services windows, supprimer les cles de registre notifierClient et supprimer manuellement les repertoires, mais je ne peux pas desisntaller depuis l'appli windows des programmes ni meme modifier, corriger, ou installer une autre version.
Toute aide est la bienvenue et le logiciel d'adobe pour nettoyer les mauvaises desinstallation: AdobeAcroCleaner, ne fonctionne pas, il ne repond pas en 10 sec apres le lancement..bref, tout pour plaire
Merci
Cordialement
Comment supprimer adobe acrobat reader ensachant que lorsque je commence la procedure, il stoppe la uninstall car fullTrustNotifier.exe n'est pas marque comme installé, j'ai pourtant desactive le Adobe genuine notifier dans les services windows, supprimer les cles de registre notifierClient et supprimer manuellement les repertoires, mais je ne peux pas desisntaller depuis l'appli windows des programmes ni meme modifier, corriger, ou installer une autre version.
Toute aide est la bienvenue et le logiciel d'adobe pour nettoyer les mauvaises desinstallation: AdobeAcroCleaner, ne fonctionne pas, il ne repond pas en 10 sec apres le lancement..bref, tout pour plaire
Merci
Cordialement
Maintaining Boostspeed
The latest version appears to be 13.0.0.6. Do you intend to maintain this product? as rapidly as things are changing it appears this product is not going to keep up.
taskbar\system errors\explorer.exe\overrun in slack based buffer
Since my first question my problem is getting worse. Now I'm unable to open the control panel the shortcut on my desktop disappeared as I tried to open it. Troubleshooter samething. I cant get a lot of things to open anymore. Cant contact Dell, Microsoft, boost speed 13 still works, but for how long? Please help me before I chuck this thing in the garbage
Explorer.EXE error code\ taskbar
About a week ago that code popped up with this text attached to it." The system had detected and overrun of slack based buffer in this application." Since then my taskbar has totally disappeared. I looked online and found some fixes, I've tried about 30 of them now and nothing works.. I've gone into the control panel to open the taskbar directly, it will not open.
Does this leave adult website traces
So these "rammerhead" links like rammer.rude.li ive been using for accessing anything that is adult and is purported to have privacy becuase its a browser inside your browser that has a different IP to prevent ISP from seeing your activity but it is deteced in adult website traces in privacy of auslogics? is this not really private and is just a false sense of security like incognito?
indexação é apagada
Qual a chave que devo desmarcar na hora que faço a limpeza fina do windows com o Bootspeed 13 ? Pois sempre que faço uma limpeza fina profunda eu perco a indexação de arquivos e sou obrigado a dar o comando pra re- indexar, não só os arquivos com0o tambem a indexaçaõ do Outlook. O que acaba me obrigando a comandar uma nova indezação e isso demora muito.
fbaiao@netfb.com.br
fbaiao@netfb.com.br
Auslogics BoostSpeed13
Why can I not remove any brower add-ons (FF, Chrome) through the internet Optimizer? It shows the add-ons but says a setting or synchronization is preventing the process?
Thanks in advance - Scott
Thanks in advance - Scott
Proper Clean Up steps for Auslogics BoostSpeed13
Is there / what is the proper order in which to use the many tools for optimization and clean up with Boost13?
Any why is BoostSpeed13 not listed in software subcategory?
Thanks in advance - Scott
Any why is BoostSpeed13 not listed in software subcategory?
Thanks in advance - Scott
The version of AMD software is no compatible with your current installed AMD graphics driver.
I have downloaded and installed the latest version of AMD Software Adrenaline Edition 24.1.1 and it worked just fine.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
Cubase and low DSP, ISR latency
Hello
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
startupmanager
I got an errormessage from startupmanager.exe with a bug-report, see attachment. What to do about it?
I left my laptop idle for a few hours. When I returned this errormessage was in front.
The following applications were open: Excel, Wordpad, Windows Explorer, Chrome, Firefox, WhatsApp, FileZilla.
I left my laptop idle for a few hours. When I returned this errormessage was in front.
The following applications were open: Excel, Wordpad, Windows Explorer, Chrome, Firefox, WhatsApp, FileZilla.
fenetre d'erreur dans messagerie
Bonjour,
Ma messagerie Thunderbird (plusieurs comptes actifs) semble fonctionner correctement, mais depuis quelques semaines s'ouvre une fenêtre d'erreur (en pièce jointe) dont je n'arrive pas à supprimer la cause.
Pourriez-vous m'aider ?
Merci d'avance, cordialement.
Denis LO JACOMO
Ma messagerie Thunderbird (plusieurs comptes actifs) semble fonctionner correctement, mais depuis quelques semaines s'ouvre une fenêtre d'erreur (en pièce jointe) dont je n'arrive pas à supprimer la cause.
Pourriez-vous m'aider ?
Merci d'avance, cordialement.
Denis LO JACOMO
Where to find the Optimize Tab
In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
Disk Defrag
HI,i have noticed a few times now that when all disks are checked my C; SSD disk gets stuck at around 71% and doesnt complete.All other SSD: ( D; E; ) finish. Even then when i stop the optimisation and uncheck disks E and D then try running just C; it still gets stuck. The only way then is to restart my PC and run optimisation only on C; it finishes the run. Its only a small hick up but i thought it best to make you aware of this/
habe doch freischaltcode von computerbild
warum kann ich nicht freischalten, wenns nicht geht dann behaltet es eben da bin ich weg
Trial
Hey huge fan and long time user of the free edition and was wondering can i get a week trial please as im thinking of buying ? My PC is still running crappy
Thanks in Advance
Thanks in Advance
Auslogics Bitreplica vs
Dear Auslogics Team,
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
Gerenciador de dispositivos
Quria programar a hora da luminusidade do écran mas não consigo, poderá ter sido da desfragmentação?
Boost speed upgrade to 13
HI
I can not finde where to put in the my license key for the new upgrade to 13. I do hve the new license key it downloaded okay
I can not finde where to put in the my license key for the new upgrade to 13. I do hve the new license key it downloaded okay
Registry Defrag
I am being bombarded to upgrade this software but there is this error message that keeps coming upand the Defrag process is never completed. Error:;- 21470244894. Task Schudeler. ERROR Code 0x8007002
ERROR Save Task (the system cannot find te file specified)
ERROR Save Task (the system cannot find te file specified)
Intergrate software/APPS
I have 2 dictionary appsw on my comp[uter/desktop. But I can't seem to get them on WORD, a microsoft program. Do I have to add them as an ADD-ON?
Rregister Editor
Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
SSD
I am using an SSD and read that you should not defrag them.
Is it ok to use your program to do this, is says 9.9 % fragmented?
Thanks
Is it ok to use your program to do this, is says 9.9 % fragmented?
Thanks
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
Fehlermeldung
Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Fading icon
Hello and thank you for your hardwork
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
Looking For a Software Replacement
I am looking for software that will replace at least all of the features of McAfe Life Sale and some. Do you have a software program(s) that will do this and if so what are they and how much do they cost?