371 questions

Empty folder program freezing up

Hello there. First time asking for assistance. The AB13 Suite works great except for the empty folder program which freezes up on both computers here at the office. Whole program then does. What now? Thanks....

Paul


337 views
May 16, 2023 at 11:36 AM

Versione Auslogics BoostSpeed 13

Gentile Auslogics, vi chiedo cortesemente se è prevista la possibilità di provare la versione Pro di BoostSpeed anche solo per 24 ore. Grazie e cordiali saluti
335 views
Apr 29, 2023 at 10:40 AM

BoostSpeed11でスキャン、不具合解決をするとGoogleDriveが終了する

お世話になります。
BoostSpeed11のダッシュボードからスキャン、表示された問題を解決すると、インストールされている「GoogleDrive」が終了します。

割り当ててある仮想ドライブも消え、タスクバーのアイコンも消えてGoogleDriveが機能しません。GoogleDriveの再起動も出来ません。
GoogleDriveが終了した時点でGoogleDriveアプリのプログラム自体は削除されないので、
コントロールパネル、プログラムと機能から削除→再起動→ログイン→再インストールが必要になります。

GoogleDriveのインストールフォルダや関連すると思われるレジストリをスキャン対象から除外しましたが、この問題は解決しません。

何か良い方法があれば教えて下さい。
以上、よろしくお願いします。

350 views
Apr 25, 2023 at 02:44 AM

Clearing Privacy History issues

Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!

Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.

the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.

Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).

What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.

Cool?
389 views
Apr 24, 2023 at 01:11 PM

BoostSpeed 13 Ansehen der Ergebnisse

Warum kann ich bei BoostSpeed die Ergebnisse nicht lesen? Sowie ich auf "Die Reparatur abgeschlossen. Klicken Sioe hier um die Ergebnisse anzusehen" drücke, verschwindet alles. Ich konne bishe keine Ergenisse mir ansehen.
Im Voraus vielen Dank!!

Regards Hans
339 views
Apr 23, 2023 at 09:44 AM

chrome

my chrome video is not working
319 views
Apr 15, 2023 at 05:49 AM

Licence Auslogics

Bonjour, je suis client chez vous depuis plusieurs années, si je prends la licence pro, aurais je la totalité de votre logiciel avec bien sur la défraguementation des disque SSD? ... Merci pour votre réponse.
Salutations cordiales.
André
315 views
Apr 14, 2023 at 09:49 AM

slow start

Bootspeed is very slow to open on my pc.
329 views
Apr 05, 2023 at 02:53 PM

BoostSpeed reading errors

On the bottom strip of the main display on BoostSpeed there are alternating displays of some statistics for CPU HDD NET and RAM. All of these consistently show 0%. Why are they not reading?
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
323 views
Apr 05, 2023 at 12:18 PM

Where to find the Optimize Tab

In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
300 views
Apr 04, 2023 at 04:14 AM

How do I correct index entry errors?

How do I correct index entry errors?
363 views
Apr 03, 2023 at 05:58 PM

upgrade

do i need an upgrade for home use only
305 views
Apr 01, 2023 at 08:59 AM

вопрос

почему не работает
322 views
Mar 28, 2023 at 04:48 PM

Defrag external usb drive?

Hello,

How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.

Thanks,
joshua
327 views
Mar 17, 2023 at 07:31 AM

Auslogics - Disk Doctor (Repair)

Hello Sir/Madam.

As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.

For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.

My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.

Regards,

Pietro Di Zanno
449 views
Mar 15, 2023 at 04:35 AM

Auslogics scans

I have been using Auslogics for seceral years now. My question is how long do the results of a scan last. I have noticed for instance that the internet settings hold goo,. the scan in clean-up are good and then the next day they must be deleted again. Does a reboot erase some of youy clean-up for tha same day? Just curious. Any info would be helpfil. Thanks.
370 views
Mar 14, 2023 at 08:36 PM

Registry Cleaner

Hallo Auslogics Team ! Ich hatte mir vor Boostspeed 13 Pro den Auslogics Registry Cleaner Professinal gekauft !
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
342 views
Mar 14, 2023 at 01:36 PM

Disk Defrag 11 - Wipe disk blank area function reports 100%, but doesn't actually finish

I know that wiping a large HD can take time, but it reached 100%, the program never repotred it finished. I let it continue to run nearly 12 hours after it reached the 99-100% point. I couldnt close the program either, so I restarted the PC in order to close the program. Dell Percision T3500, 24GB RAM, 8 core Xeon W3540, Win10 x64 on SSD. Everything else runs well. I'm using the paid version of Disk Defrag 11.
344 views
Mar 13, 2023 at 11:13 PM

Start up

When I use Auslogiics to fire up It seems to take a long time befor I can use it
300 views
Mar 12, 2023 at 01:52 PM

administrator blocked auslogics

I have been using auslogics for multiple years now... I recently bought another key today. Today the software wont open because it pops up with a message indicating this software has been blocked by the administrator. However, I am the administrator.... So I am confused because now I can not run the auslogics software. Can you help.



Kind Regards,

Michael Figueroa
1112 views
Jan 19, 2022 at 10:17 PM

Pro Version

Considering the trial version does the job of speeding up my computer, what is the cost of the Pro Version?
1090 views
Dec 22, 2020 at 02:05 AM

ANTI-MALWARE PROGRAM CONFLICT W/NORTON SECURITY

Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?

1068 views
Mar 21, 2020 at 11:42 PM

Cannot play RDR2 through Steam

[2020-08-06 13:50:16.559] [ ERROR ] [11668] [crashdetection] Exit code 0xc0000005 indicates a fatal game exit (reason: STATUS_ACCESS_VIOLATION)

I think my game was hacked
1060 views
Aug 06, 2020 at 11:36 AM

антивирус

влияетли эта праграмма на скачивание антивируса
???

1053 views
Jan 12, 2020 at 03:50 PM

I am having catastrophic failure 0x8000ffff and error 0x0000022

I changed my account type from administrator to standard and i couldnt access most of my subscritions like Microsoft packages

1050 views
Sep 22, 2020 at 09:33 PM

Auslogics BoostSpeed12Proか゛認証されない

本日2022.01.21Gingから追加購入しましたが、ライセンス認証はされますが、何度してもライセンス認証されても【Pro版】に成りません

1.購入日:2022.01.21

2.製品名:Auslogics BoostSpeed12Pro(3PC用)

3. ライセンスキー 【

Content hidden to protect privacy
】(0は数字のゼロです)


1041 views
Jan 21, 2022 at 01:51 PM

블루스택 튕김현상

안녕하세요.
제가 블루스택으로 마블 퓨쳐파이트 라는 게임을 하고 있습니다.
하지만 자동사냥을 돌리면 중간에 딱 멈추고 화면을 클릭하면 바로 튕기고 게임이 꺼집니다.
해결 방법이 있나요?
잠깐 찾아보기엔 렉 유발 되는거처럼 성능을 좀 요구하는 게임이 그럴 수 있다고 하는 거 같긴합니다.
1036 views
May 23, 2021 at 09:46 AM

Certificates

Good evening,
I have an issue with my computer no longer reading the certificates when I insert my id card into a card reader on my computer. I've tested the card reader on different computers with windows 10 as well. So it's not the device or id card. I tested different card readers to no avail as well. It seems to be a softare issue that I think Austologics is blocking or something else. I've tried different browers and that also did not lead to any success.

1036 views
May 16, 2020 at 02:18 AM

Заблокировал утиллиту Disc Doctor

Приветствую! Как мне выйти из положения?
1015 views
Jan 17, 2021 at 10:10 AM

Auslogics BoostSpeed 12 после проверки сисстемы блокирует и выпиливает AdGuard из сисстемы

Доброго времени суток. Уважаемые разработчики, я давно пользуюсь вашими программами, в том числе и Auslogics BoostSpeed. За последнее время я пользовалась Auslogics BoostSpeed 10 и всегда всё было без сбоев. 23 мая 2021 года я решила приобрести Auslogics BoostSpeed 12. С установкой программы не было проблем. Но после сканирования и выполнения оптимизации устройства у меня перестал работать AdGuard и не просто перестал, я его не могу даже переустановить. Пришлось мне переустанавливать всю сисстему заново. До этого проблем с AdGuard не было у Auslogics BoostSpeed 10. Мне бы не хотелось удалять Auslogics BoostSpeed 12 и возвращать свои средства. Помогите разобраться, что нужно сделать, что бы Auslogics BoostSpeed 12 не выпиливал и блокировал AdGuard из моей сисстемы, т.к. я давно пользуюсь этим программным обеспечением и он меня полностью устраивает (лицензия оплачена). Я бы понимала, если бы он выпиливал, но сам заменял функции AdGuard, но после выпиливания данной программы я полностью остаюсь не с защищенным интернетом и с кучей не нужной мне рекламы. Как вы понимаете меня это не устраивает совсем. Очень надеюсь на помощь в отладке вашей программы с программой AdGuard. В противном случае мне придется откатить Auslogics BoostSpeed 12 до Auslogics BoostSpeed 10 и вернуть потраченные средства. Но еще раз повторяю, я не хочу этого делать, а хочу полностью разобраться в данном конфликте программю Так обе эти программы мне нравятся.
1013 views
May 24, 2021 at 05:57 AM

Boost speed does not recognise pro

I have been using pro version for several years now it asks me to activate pro which it rquires me to pay for which is totally wrong as I renewed my subscription in 2021. It also tell me that an admistrator has blocked me opening the program, this is aloso wrong as I am the system operator and have not blocke Boostspeed. I have re- installed the program and re entered the key 3 times so far it will not work correctly as it tell me tah I don not have pro which is WRONG.
Colin Summerfield
1008 views
Jan 21, 2022 at 10:59 AM

Не получается запустить.

Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)

995 views
Dec 22, 2019 at 10:39 PM

game crash

Hello. When you start any game while the program is running in the background, it crashes to the desktop. When you exit the program, there is no departure. Is this what you should do when starting games? Game optimization has been activated.
994 views
Sep 02, 2020 at 06:27 PM

Windows 11 beta

Hi,
Next week I'll be updating to Windows 11 will I still be able to use Boostspeed on that OS without doing any damage?
981 views
Jun 16, 2021 at 06:58 PM

wont install new drivers

cant install nvidia gforce and driver booster wont update my drivers ie: game drivers for windows

972 views
Jun 14, 2020 at 05:08 PM

BoostSpeed wird permanent von Avira gelöscht

Sehr geehrte Damen und Herren,

mein Antivirusprogramm "Avira Antivirus Pro" stuft BoostSpeed permanent als Bedrohung ein und löscht es.
Gestern wurde BoostSpeed 3x gelöscht!

Hierfür hätte ich gerne eine Lösung von Ihnen erfahren.


Mit freundlichen Grüßen

Prösch

961 views
Apr 11, 2020 at 07:05 AM

error code 46362C1-0B211304-00000A09

This error code has been stopping me from opening numerous files. I cannot find any solution to it on MS error code site.
It has been driving me crazy for months now.
46362C1-0B211304-00000A09
Thanks,
Jim
954 views
Oct 27, 2021 at 07:38 PM

Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it

Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?

941 views
Dec 13, 2019 at 07:36 PM

deleted activation informations of windows10 pc

I installed Auslogics bootSpeed 12 Pro, and after first scan, reboot windows 10 pc(Dell XPS 13 9505).
I was obtained next messages. Maybe other sofware's Activation informations were destroyed.

(1)‪C:\ProgramData\Stardock\Fences3\License.sig was deleted.
The first massage is that reactivate fences 3. (Activation code is neaded)

(2)In the case of Auslogics driver updater, my activation code exceeded the limited number of activation.
And the costomer service replied me by mail that they cannot refresh my activation code.

(3)Next massge window opened that I rejister again Sound Blaster of Creative Teclonogy co.

(4)From now on, what do I do to prevent missing activation informations of my Windows10 pc.

928 views
Oct 19, 2021 at 07:05 AM