Never updates any drivers for two years now...
UPDATE
When I see the mesage in my laptop: " You can upgrade" to 13.0.0.2. Visit our web page.
I go to this web and I download the file that you have there.
I install this file, but I can't have the new version.
Could you guys help me?
Thanks
fail fast exception
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
programa ya instalado
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Latest update
Auslogic 13 update problem
software Auslogics
New Problem Notifiction
何回cleanningをおこなってもデフラグや調整項目がある
PCのどこかに、基本的な問題点があるのか心配しています。
software updates
in the last few weeks I have purchased several of Auslogics software programs. Since I began using the software, 3 of the programs have been updated with an additional cost. When I originally subscribed to the software I did not expect to have to pay for updates
only after a yearly subscription and the a possible update of the price.Although I have found the software to be good, the prices are somewhat higher than other products on the market such as CCleaner, Malwarebytes and F Secure which I also use with fixed prices for a yearly subscripton withou additional costs for updates. I WILL NOT BE RENEWING THE SOFTWARE AFTER THE ALLOCATED PERIOD BECAUSE MY FEELING IS THAT THE TOTAL PACKAGE YOU PROVIDE IS NOT VALUE FOR THE COST INVOLVED.
PLEASE RESPOND TO MY COMMENTS AS ABOVE. I ALSO APPRECIATE THAT AUSLOGICS SOFTWARE ALLOWS INCREASED MANAGEMENT OF MY WINDOWS 10 PC , HOWEVER I AM NOT CONVINCED THE EXTRA COST IS WARRANTED.
REGARDS, D BOHEMIA
Unable to Install the new Auslogic Boostspeed 13.0.0.1 update
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
Games
Asus boost speed 13 upgrade
i have +- 180 days left in 12 you bring out 13 and offer me a discount to me this is not right i paid for 12 i still have 180 days left what i feel you should of done rather was to allow me to upgrade free to 13 but only keep 180 days when it expires guess what i will buy a new 13 license
or how about you look at each person account to see how long they have supported your product and then give them a low low upgrade price my price in south afdrican rands is +- 360 rand i have refered numerous employees to use your product because i can stand behind it knowing how good it is
Mark Webb
CEO
Flexibreaks holidya and travel club
0828515607
BoostSpeed13 更新インストール
現在 BoostSpeed_12 使用中です。 _13 アップデートの購入続きを完了しました。 手順書に従う中で "ヘルプ" のプルダウン内に "レジスト"記述が無く、バージョンアップできない。正確な手順書をお送りください。
Disk Defrag
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
Activate Pro Version
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
504 Auslogics files designated as Malware
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
Auslogics BoostSpeed 12について
Tab Crashes when go to Look at Report from Deep Disk Cleaner
Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
Quanti pc
pop up for ugrade when I already subscribe to boost 12
Application will not recognize Pro version
I have an active license key and discovered today that the app reverted to the free version. I put in my license key and it notes activation to be successful, however still runs as the free version.
To note: I have been unable to access the app itself without having to go into the administrator Windows account, which is a new finding since today as well. Not sure if that's related.
Any help would be great. Thanks.
John
Майкрософт офис
Notifacations
I do not need constant reminders that I have 3 questions, now 2. Stop it.
ホルダーが「空」になる
SSD optimization
I am using SSDs optimization for my SSD drive but I found out on the internet and youtube that I should not defragment my SSD, just let window trim does the work. I would like to know if Auslogic do any good for SSD and is it gonna insert extra "write" to my SSD? If it is the case I would rather use Window trim since I saw SSD optimization also do defragment task when I optimize with Auslogic Bootspeed 12
Best
Green Buttons asking to activate pro version
activation
it is not possible to activate this application with this key
Fences Requires Reentry of Product Code Everytime BoostSpeed Runs
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
Outlook not closing correctly
Brand new machine hi end
When I close Outlook it does close OK
But when I reopen in morning I always get message it did not close correctly "Something stopped it form closing" Do I want to restore to previuos". I click yes and it opens
Any ideas. It was reinstalled
Thanx