Application will not recognize Pro version
I have an active license key and discovered today that the app reverted to the free version. I put in my license key and it notes activation to be successful, however still runs as the free version.
To note: I have been unable to access the app itself without having to go into the administrator Windows account, which is a new finding since today as well. Not sure if that's related.
Any help would be great. Thanks.
John
register Problem of the Auslogic boot speed pro12
I had aready register the code the i got the email after paid for it.
and when i check programe registertion its show this programe is registed. but I can not use it as the pro version.
it is still have the Activate pro Version button on the down right side.
Please help.....
Pro Version aktivieren.
Your Auslogics license information, order #
Ich nutze AusLogics Boost Speed schon sehr lange - mit obigem licence key lässt sie sich nicht aktivieren.
Was ist das los - auch löschen und Neuinstallation hat nichts gebracht.
Mfg
Decker Gustav
completed (order number: 3088xxxxx).
i cannot start boostspeed. they say its for my safety. i do not understand this
C:\Program Files (x86)\Auslogics\BoostSpeed blocked by integrator
Auslogics BoostSpeed12Proか゛認証されない
本日2022.01.21Gingから追加購入しましたが、ライセンス認証はされますが、何度してもライセンス認証されても【Pro版】に成りません
1.購入日:2022.01.21
2.製品名:Auslogics BoostSpeed12Pro(3PC用)
3. ライセンスキー 【
Boost speed does not recognise pro
Colin Summerfield
blocked
using my shortcut for disk defragmenter pro
Product will not activate
I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -
administrator blocked auslogics
Kind Regards,
Michael Figueroa
Integrator.Exe wird von Windows geblockt
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
ホルダーが「空」になる
pop up for ugrade when I already subscribe to boost 12
Updates to file finder and boost speed
Almost on a daily basis I am getting notification of duplicate file finder and BoostSpeed 12 has a new update. I click onto download, I see where it is downloading, but when I go to install the update it does nothing. It doesnt tell me it has completed installation or given me a notce that it failed. This has be going on since I puchased Logistics. I guess it is not my fault for not following up on this, since I'm not getting my monies worth.
If you could help to get the problem solved or tell me what I've been doing wrong, sure would appreciate it.
Thanks and have a Happy New Year!
Mary Jane West
Making best use of the high system resource usage detected warning
windows search
Register errors
msedge.exe
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
P.S. Why isn't Auslogics a subcategory option?
Auslogics BoostSpeed 12について
Not Receiving Emails
I have tried by re-installig the software,but I find all the settings arestill there, whereas I used to have ti restore backups.
Roger Hilton
FIX: bdservicehost high cpu / memory usage
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
I cannot reinstall ScanSnap software
I have had a Fujitsu S1500 ScanSnap scanner on my computer since I got it. Something happened lately (probably a refresh of Win10) and the program, ScanSnap Manager, stopped opening automatically when I turned on the scanner (connected by USB). After trying every remedy I could think of, I uninstalled the ScanSnap software, and cleaned the registry, figuring that I would reinstall the software from the original disk.
But even though I've done everything I know how to do to wipe the computer free of any traces of the original program, as you can see from the attached screen shot, the installer is not letting me install the program as it thinks there's a version already on the computer. There's nothing in installed programs, nor the registry, related to this program. And I force uninstalled it too. At this point I'm unable to use my scanner. Help!
Note that the subcategory of this question is not "Get Help" but your UI won't let me submit a question without choosing something, and the program in question is not in the dropdown list becuase it's already been uninstalled.
ATOK ジャストシステム契約管理エージェント「管理のサービス」が停止になってしまう
どのように対処すればよいか。
programs as a threat
Dear Sir / Madam, I bought the programs Defrag, Register Cleaner and Bootspeed from Auslogics. With license. I am satisfied with the programs but Malwarebytes sees these programs as a threat. See picture. How can this and how can I solve this.
Discord failed installation
hello there, im facing a problem with installing discord, says something about checking the setup logs or something to contact author. i watched your video on how to fix that problem and tried both methods but they dont work. Is there anyway i can get help? Thank you. Btw i just put access because there was no discord subcategory, the problem isnt with access its with discord.
acronis power plan
I used to have acronis power plans available. I no longer have them. How do I install them and where do I get them? I had them a month or so ago but when I did a new install it was not availab.e\\le
Samsung Kies Software side by side configuration
Hi guys. I am running a brand new installation of Windows 10, and i am attempting to install Samsung Kies to sync with my Samsung Galaxy S10+ smartphone, and it says that there is a side by side configuration error.
Disk Drill 4.1.551.0
Me estoy iniciando con su BOOSTSPEED y me parecen excelentes todas las soluciones que ofrece.
Gracias anticipadas y un saludo.
Carlos Martinez
Chrome isn't in Volume Mixer, Windows 10
Any tips/suggestions to get the browser back to Volume mixer?
Avira keeps deleting Boost Speed and all Auslogic *.exe files as a PUA.
Hi there,
I have been on mail with Mr. Alex Bratton of your Support Team. I am a registered purchaser of the Auslogics Boost Speed software, and I have had immense trouble with installing and running it as my Avira antivirus software keeps deleting all Auslogics *.exe files as PUAs having the virus "Auslogics.o" as reported in the Avira quarantine log.
Alex had suggested that I put Auslogics on the Avira scanner EXCEPTIONS list - which I did, but to no avail. Do they have an axe to grind with your software ? I have even sent an e-mail to Avira support telling them hat Auslogics software originates from a Company having its website www.auslogics.com, and to definately check both the antecedents of the Auslogics Company and their software as genuine and not PUA - and thus I requested them to reconsider the action against yyour software exe files. Theu have not yet got back to me regarding this.
I have so far installed and re-installed your Boost Speed software over 5 times since its purchase on 28.08.2019, and each time Avira deletes the *.exe files as well as the entire Auslogics folder in the C:\Program Files (x86) path, every time I shut-down and boot-up my laptop. And all this after making Auslogics an "exception" in the antivirus and real-time protection scanner settings of the Avira software .
Could your team please have a word with the Avira development team to resolve the vixing issue, as I am most certain there will be many othercustomers worldwide using both the Avira and the Aulogics softwares and facing these issues ?
I have actually reached a point of near frustration, as both the Avira and Auslogics softwares do a great job individually, but DO NOT LIKE EACH OTHER (cannot function together) as seen on my laptop !!
Kindly update me on a solution to this problem.
Many thanks,
Savio da Rocha Lobo,