372 questions
Recording locks up.
Sometimes a pop-up behind a screen that I am unaware of, like BoostSpeed, will render an application or camera immobile. How do I keep pop ups from happening? What can I do?
upgraging lost my registered status
Hi,
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
boostspeed tray icon
What is the little red dot that appears on your tray icon? When it appears, what does it mean? How do you get rid of the red dot?
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
Не работает веб-камера
После последней настройки, с помощью вашей программы у меня перестала работать веб-камера и микрофон в программе Zoom. Микрофон удалось включить путем рекомендации от Zoom разрешения доступа приложениям к микрофону. Но решения с включением веб-камеры нету. Как решить проблему?
installation logiciel
Bonjour, je n'arrive pas à installer un Logiciel , j'ai une erreur 1720 de windows installer
Saved on PC Email
A long time ago I had AOL (not Gold) & I couldn't transfer the Saved on PC mail to Gold. My Question is: Can your File Recovery Software recover that mail from my hard drive?
SSD
I am using an SSD and read that you should not defrag them.
Is it ok to use your program to do this, is says 9.9 % fragmented?
Thanks
Is it ok to use your program to do this, is says 9.9 % fragmented?
Thanks
How to avoid file delete problems in Lightroom Classic
Lightroom creates catalog images and movg es file around as you manage the catalog and/or import files from various devices or drives. How can I avoid LR catalog issues when using Aslogics software?
Fading icon
Hello and thank you for your hardwork
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
stringa di ricerca
Buongiorno, ho eseguito una ricerca per stirnga e non ho ottenuto risultati, ho eseguito la stessa ricerca con regedit e sono uscite diverse voci di registro, come mai?
Cosa devo fare per ottenere questi risultati con la vostra app e per cancellarli senza cercarli e selezionarli uno ad uno con regedit?
Grazie.
Cosa devo fare per ottenere questi risultati con la vostra app e per cancellarli senza cercarli e selezionarli uno ad uno con regedit?
Grazie.
Driver Updater on Win 11 platform
My laptop uses Win11 OS. I get notices that several drivers need update. I start Driver Updater. Shortly later I am notified Driver Updater cannot connect to sever. This only happens on Win 11,
James Denneny
James Denneny
Delete/clean norton
Why won't Auslogics BoostSpeed clean norton during a scan. We really like your product but don't want lingering files from Norton when it's not being used.
John Smith
John Smith
Actualizaciónes
¿Siempre es mejor actualizar todo el software (windows, sistema operativo, apps, drivers, etc.) a la versión más reciente que se vaya publicando? o cuando todo está funcionando en forma correcta ¿es mejor detener las actualizaciones para dejar todo como está y que se mantenga todo funcionando en forma adecuada?
DRIVER UPDATER REFUSES TO CONNECT
Any idea as to why this is happening? I have registered the program in the WIN firewall, but no success. All other Auslogics software is working without a hitch.
Thanks for your help!
James
Thanks for your help!
James
heute kein Zugang zum Abruf der Treiber-Daten
Gibt es ein technisches Problem beim Zugang zum Datenserver?
Anti-virus
Bonjour !!
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
Auslogics Boostspeed 12 problem
When I try to use the Boostspeed 12 "Maintain" tab and do a SCAN, I get a message popping up stating that it is "checking fragmentation on my F: Drive.
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
SurfShark VPN problem with DNS wire???? with BS and Surfshark .3.0
Hi,let say I like your software very much. Please show me how to end error message form BS "interupted DNS" from Surfshark
window defender
my window defender Virus & threat protection is taken over by kypersky internet security. Can you get back my window defender if i buy pro.
problem with auslogics
It wont let me create a restore point, and the restore points I had created it has deleted.
msedge.exe
Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
ошибка какая-то
Переодически выдает ошибку, я так понимаю это связанно с каким-то файлом отвечающим за обновление Майкрософт Офиса. Появляется не так, чтобы часто. Может 1 раз при перезапуске компьютера. Как это можно было бы убрать? Переустановить офис, наверное...
Pro version ?
Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Bootspeed 13
I recently received an emil in regards to Bootspeed 13, unfortuanatly I didnt follow it up because of Covid, now that I am better I would like to put my name down for ithe upgrade.
kind regards chris moore
kind regards chris moore
question about WIN10 servises
how can I stop the unnecessary servises in windows10? without harming to my divice or OS.
Could not activated my license
I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
проблема с регистрацией
Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
windowsの立ち上がり時間の表示設定
貴社のBoostSpeed12Proを使用していますが、pc電源ONからwindowsソフトが立ち上がる迄の時間表示の設定手順を 教えて下さい ・・・宜しくお願い致します。。。
Unable to Install the new Auslogic Boostspeed 13.0.0.1 update
Hi
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
ソフトを起動しようとすると保護がかかってしまいます。
Auslogics BoostSpeed 12をしようしていますが、最近になってソフトを起動しようとすると下記のメッセージが表示されます。
「ユーザーアカウント制御
このアプリは保護のためブロックされました」
対処方法をご教示ください。
「ユーザーアカウント制御
このアプリは保護のためブロックされました」
対処方法をご教示ください。
Disk Defrag
Buongiorno,
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni