1897 questions
установить андройд 13
мой пк не видит нокиа 503- андройд самостоятельно установить не могу.прошу установить андройд 13 на нокиа 503 через ноутбоок самсунг R540 ОН ПОДКЛЮЧЕН ПО КАБЕЛЮ USB.
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
wakeup problems
I dont turn off laptop at night. I run it with lid closed when in use.
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
Server use
Is Auslogics Registry Cleaner suitable for servers?
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
upgraging lost my registered status
Hi,
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
hard drive chattering all the time win 10 pro ?????
my hard drive keeps chattering windows 10 can you help??????
boostspeed tray icon
What is the little red dot that appears on your tray icon? When it appears, what does it mean? How do you get rid of the red dot?
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Power options gone
I have problems Closing the lid does not work. I set it to sleep or shut down neither of them worked.When I tried to find a solutions
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
HDD 100% in Task Manager
Здравствуйте.
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
frequent log offs
Windows 11 prro keeps logging me off. I have tried several fixes from internet, but nothing works. Pleassse help. Thank you, Charles
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
transfert photos depuis icloud
hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
Не работает веб-камера
После последней настройки, с помощью вашей программы у меня перестала работать веб-камера и микрофон в программе Zoom. Микрофон удалось включить путем рекомендации от Zoom разрешения доступа приложениям к микрофону. Но решения с включением веб-камеры нету. Как решить проблему?
AUTOMATION ERROR THE OBJECT INVOKED HAS DISCONNECTED FROM ITS CLIENTS RUN-TIME ERROR
PLEASE HELP!!!!!!! I INSTALLED A PROGRAM CALLED "QUANTUM RESONANCE MAGNETIC ANALYZER" ON COMPUTER EVERY THING INSTALLED FINE, IT CREATED A DESK ICON ETC... BUT WHEN I TRY TO OPEN THE PROGRAM UP THE MESSAGE IN THE SUBJECT ABOVE IS WHAT I KEEP GETTING. I TRIED EVERYTHING!!!!!!!!!!!!!!!! I RESTARTED THE COMPUTER, I DID THE SFL /SCANNOW THING, I DISABLED MY VIRUS PROTECTION, I UPDATED DRIVERS BUT NOTHING!!!!!!! IM TRULY AT A LOSS IM VERY FRUSTRATED BECAUSE I PAID OVER 100 DOLLARS FOR THE PROGRAM AND I CANT USE IT! SO CAN YOU PLEASE HELP? OR WILL I HAVE TO TRY TO SEND THE PROGRAM BACK? I HAVE HP COMPUTER WINDOWS 10 MICROSOFT THANK YOU! MY NAME IS KENNETH BINGHAM
Fonction "rechercher dans" en haut à droite des fenêtres windows 10
la fonction de recherche est totalement inactive. On ne peut rien inscrire dans la case prévue.
Критическая
критическая ошибка Web Camsc-13HDL 11939NUSB\ViD_2232&...... Ошибка пользователя Appication Error
Boostspeed Benachrichtigungsanzeigen
Hallo wertes Auslogics-Boostspeed-Team,
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
Driver Updater
Driver Updater won't scan. Says its blocked by Firewall. McAfee doesn't show that it's quareentined or blocked.
mcafee popouts stupid
how can disable or uninstall mcafee that seems to have been install by ms in windows10?
disk defrag integrated into boostspeed 11.5
I have both the boostspeed 11.5 and the defrag ultimate
Question:
It seems like the integrated defrag in boostspeed 11.5 is the old version not the new ultimate
What would be the advantage of getting the ultimate version if it is not integrated - what does the integrated version NOT do that the ultimate version does?
ssd external defrag
I have an external drive, SSD, attached to my computer thorugh usb3.
When I try to optimize it, it takes forever, and seems not to move along....is this an issue? or how can I defeag the external?
Thank you
When I try to optimize it, it takes forever, and seems not to move along....is this an issue? or how can I defeag the external?
Thank you
Virus ID'd as trojan in the deepscan exec
It is ruining my use of Auslogic to keep my computer clean and optimized. This 'trojan' apparently slows all the performance and my web browsers! Do you all have a fix. I had reinstalled once and still had the problem. Now, my auslogic is not doing its job in cleaning 'junk' from my drive! Got any solution?! The file was deleted by Kaspersky!
empty folder cleaner
Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive
Auslogics registry cleaner
Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.
System: Windows 7 Home Premium
software is slow
Hi
How do I increase memory resources to a particular progam/software using auslogics
help needed
Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps
respectful.TOOFAN
Csnnot access new PC from other PCs on LAN
I have a private home LAN with three Windows 10 PCs that are sharing files & folders among themselves with no problem - I just click their PC name under Network in File Explorer. Problem is, I just set up a new Win 10 PC but when I click on that new PC's name under Network in File Explorer on any of the existing three PCs I get an error msg saying I don't have permission to access the new PC.
I made the new PC discoverable and not pwd-protected, just like the other three. I set up the Documents folder in the new PC to be shared by Everyone with Full permissions. All four PCs are running Win 10 (ver. 2004). All are wired Ethernet desktop PCs except one existing PC is a Wi-Fi laptop.
This situation is weird because everything works fine when I go to the Search box (next to the Start icon) on any of the other PCs and type \\NewPC\Users\UName\Documents\. The same good result occurs when I set up a shortcut targeting \\NewPC\Users\UName\Documents\.
There is no hardware/connectivity problem because the new PC is seen by all the others and I can access the shared Documents folder\files in either of the two ways just described above.
Am I missing a setting, or something else? Thanks for any help.
I made the new PC discoverable and not pwd-protected, just like the other three. I set up the Documents folder in the new PC to be shared by Everyone with Full permissions. All four PCs are running Win 10 (ver. 2004). All are wired Ethernet desktop PCs except one existing PC is a Wi-Fi laptop.
This situation is weird because everything works fine when I go to the Search box (next to the Start icon) on any of the other PCs and type \\NewPC\Users\UName\Documents\. The same good result occurs when I set up a shortcut targeting \\NewPC\Users\UName\Documents\.
There is no hardware/connectivity problem because the new PC is seen by all the others and I can access the shared Documents folder\files in either of the two ways just described above.
Am I missing a setting, or something else? Thanks for any help.
Cannot get my computer to read SD cards
I've used your device driver updater and still cannot get my computer to recognize an SD disk.
PC Crashing/Freezing
To Whom It May Concern,
In recent weeks, I have been experiencing intermittent crashing/freezing of my PC. This sometimes happens 1/3 times a day or I can go a few days without it occurring at all. It is not, actually, a BSOD - just a "straightforward' freeze or crash.
When accessing the Windows Event Log, the common denominator would appear to be identifed as follows:
Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.
I would consider myself reasonably computer savvy, describing myself as a software 'Geek', in addition to having set-up remote computing facilities. However, this is difficult to readily identify and despite, browsing the Internet extensively, I find I cannot resolve or prevent this from crash from occurring.
The only 'fix' I have reviewed is accessing 'Windows Services' that requires the 'Server to be restarted' but as this is already running (having reset itself?) I cannot, actually, do anything:
https://social.technet.microsoft.com/Forums/en-US/cd53a3ed-3833-4a62-8784-2ab3fa0c464e/unable-to-open-the-server-service-performance-object-the-first-four-bytes-dword-of-the-data
Any advice, recommendations or support you an afford me would be very much appreciated.
I am grateful for your attention, time, effort and anticipated co-operation in assisting me to resolve this perplexing and frustrating issue.
Kind regards to you and your colleagues at Auslogics
Ian
Ian Willsher
In recent weeks, I have been experiencing intermittent crashing/freezing of my PC. This sometimes happens 1/3 times a day or I can go a few days without it occurring at all. It is not, actually, a BSOD - just a "straightforward' freeze or crash.
When accessing the Windows Event Log, the common denominator would appear to be identifed as follows:
Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.
I would consider myself reasonably computer savvy, describing myself as a software 'Geek', in addition to having set-up remote computing facilities. However, this is difficult to readily identify and despite, browsing the Internet extensively, I find I cannot resolve or prevent this from crash from occurring.
The only 'fix' I have reviewed is accessing 'Windows Services' that requires the 'Server to be restarted' but as this is already running (having reset itself?) I cannot, actually, do anything:
https://social.technet.microsoft.com/Forums/en-US/cd53a3ed-3833-4a62-8784-2ab3fa0c464e/unable-to-open-the-server-service-performance-object-the-first-four-bytes-dword-of-the-data
Any advice, recommendations or support you an afford me would be very much appreciated.
I am grateful for your attention, time, effort and anticipated co-operation in assisting me to resolve this perplexing and frustrating issue.
Kind regards to you and your colleagues at Auslogics
Ian
Ian Willsher
Система пишет , что принтер не подключен
Доброго времение суток! После сканирования компьютера Boos и обновления драйверов с помощью Вашей программы, система стала выдаать ошибку 45 при раюоте принтера HP 1020. Как это исправить?
Regular luz de la pantalla
Quiero saber porque con windows 10 no puedo regular la intensidad de luz de la pantalla. Quiero aumentar o disminuir su intensidad de brillo y no puedo.
BoostSpeed 12 clobbers Voice Recognition.
I am running Windows 10 Build 19042-2009 BoostSpeed 12 Pro. I use Microsofts Voice Recognition with Language Microsoft Speech Recognizer 8.0 for Windows (English - US). When I installed BoostSpeed and run the scan and resolve. It clobbers Voice Recognition. I get this error message after. "Speech recognition could not start because the language configuration is not supported.The recognizer language must match the language of the user interface." Checking the configuration shows that the language configuration is still what it was before it stopped working.
I run the rescue undo, and it still does not allow voice recgnition to run. I have to reinstall windows to get it to work. I have excluded Microsofts Speech folder from appdata and protected several keys in the registry to try to prevent this. Nothing I do seems to resolve the situation.
Please help.
Thank you
I run the rescue undo, and it still does not allow voice recgnition to run. I have to reinstall windows to get it to work. I have excluded Microsofts Speech folder from appdata and protected several keys in the registry to try to prevent this. Nothing I do seems to resolve the situation.
Please help.
Thank you
administrator blocked auslogics
I have been using auslogics for multiple years now... I recently bought another key today. Today the software wont open because it pops up with a message indicating this software has been blocked by the administrator. However, I am the administrator.... So I am confused because now I can not run the auslogics software. Can you help.
Kind Regards,
Michael Figueroa
Kind Regards,
Michael Figueroa
старая программа на дисе (с) 64 битная называется 7 максисальная
как я могу убрать лишние файлы и програмы остатки 64 битной системы,очистить диск (с)
Re-enable the Windows key on the keyboard
How do I Re-enable the Windows key on the keyboard. Something in Boostspeed disabled it.
Disable Edge Swipe in Win10 B2004 update
Hi Folks,
Thx much for your help on prior question!
Please tell me how to permanently, (as in no 'edge swipe restart' on system restart), disable Edge Swipe.
F&*!#ing MSFT does it again; Win10 uppdate 2004 kills cortana local/system search ability, which disappears even finding any settings re Edge Swipe.
Please tell me how to kill kill kill kill forever Win10 Edge Swipe.
Thx very much, Folks!
Scotty :-)
Thx much for your help on prior question!
Please tell me how to permanently, (as in no 'edge swipe restart' on system restart), disable Edge Swipe.
F&*!#ing MSFT does it again; Win10 uppdate 2004 kills cortana local/system search ability, which disappears even finding any settings re Edge Swipe.
Please tell me how to kill kill kill kill forever Win10 Edge Swipe.
Thx very much, Folks!
Scotty :-)
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7