auslogics driver updater causes WINDOWS 10 to be disabled
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
aidez-moi à installer Windows11 à partir de Winsdows10
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
can not download .exe file
Windows cannot access External (G:\) Drive - ????
Disk help
I just put download because I cant make question without
Malwarebytes
computer very slow
It has Windows 10 HOME, 1995Mhz CPU, 4GB RAM, 700GB HDD.
I have installed the Auslogics programs and used the scans a few times.
WHat is the most effective thing Ican do to speed up this computer ?
( not including replacing it! )
Allow list
Deleted files
Windows system font distortion
ваш деинсталятор не удаляет эту программу
Can not print
Hard drive not showing up on optimize screen
Should I be concerned about this? What does this mean?
thank you for your response(s).
PC slows down after a period of being on, following re-boot.
After I re-boot it works fine but several hours or perhaps a day later, the PC slows down and re-quires another re-boot.
I just noticed today, after upgrading to V 12.3.0.1 that, although it still slows down, I selected the Disable BoostSpeed instead of leaving BoostSpeed running in the background, and the PC immediately sped up to normal! This is the first time I have tried that.
Have you run into this anomoly before and/or do you have a fix for this?
Many thanks!
Não reconhecimento pelo sistema.
Tenho uma unidade SSD externa que não esá sendo reconhecida pelo gerenciador de arquivos e nem pelo gerenciador de discos mesmo tendo feito os procedimentos básicos.
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Uninstall manager
Можно вернуть в Uninstall manager
количество установленных программ? куда то пропали...
Спасибо.
Start Menu Disappeared
A few weeks ago while using Windows 10 on my desktop computer, the monitor momentarily went black then came back on. But since then the Start Menu is totally missing. After clicking on Start button, an error message comes up now.
Sudden switch to No Error Mode
I am using a ASUS N73S system with W10-64, Windows standard firewall and Kaspersky antivirus. All softwares are update and everything runs fine.
Working with IExplorer and Edge in parallel, suddenly the screen turns black and the system is blocked during 3 or 4 seconds, then the screen pops up again and the system reactivates in Without Error Mode. I have to reboot and the system reactivate in Normal Mode. This looks like a stability problem, but maybe a compatibility case between edge and ie.
Thank you to help me
A problem caused this program to stop interacting with Windows.
Application Name: Ddfs32_400.exe
Application Version: 0.0.0.0
Application Timestamp: 602cd97f
Hang Signature: eff9
Hang Type: 134217728
OS Version: 6.3.9600.2.0.0.272.7
Locale ID: 1031
Additional Hang Signature 1: eff9e5103e62437273df6ec28305e96a
Additional Hang Signature 2: 4777
Additional Hang Signature 3: 477790f40c8afa87ecb7402697914cec
Additional Hang Signature 4: eff9
Additional Hang Signature 5: eff9e5103e62437273df6ec28305e96a
Additional Hang Signature 6: 4777
Additional Hang Signature 7: 477790f40c8afa87ecb7402697914cec
Wo steckt der Fehler? - Was soll ich überprüfen?
Cant Access app
I can access everything on my computer except for a application and winrar after updating my windows.
It shows Windos cannot access the specified device, path or file. You may not have the appropiate permissiong to access the item. I reformated my pc and its the same.
Problema con Auslogics Driver Updater
Buenos dias, tengo un problema con la aplicacion Auslogics Driver Update, ya solicite anteriormente me solucionen este problema, inclusive me solicitaron que reinstale el aplicativo, pero no se soluiciona este proble, por favor tengo que actualizar algunos drivers, pero se queda la PC congelada cuando va hacr la actualizacion de dichos driver, para constancia les envio fotos del problema.
Compare configuration changes in boostspeed
I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.
Regards,
Paul
Errore generico su account hotmail.com
updating software
i get a message on my laptop for a new verion of boostspeed 11 pro. when i click lon the link and try to update, i get a purchase screen.
so, how do i update without repurchasing the software
Режим сна
Auslogics BootSpeed 11の設定をdefaultに戻す方法を教えて下さい
Auslogics BootSpeed 11を使い始めてまだ1週間程度ですが、あまり知識がないのにいろいろな設定を自己流で行ったので、これが最適な設定か分からなくなりました。
そこで、いちど設定をデフォルトの出荷時状態に戻すほうほうを教えて下さい。設定は再度考えて必要最小限に戻すつもりです。
Windows 10 Reliability Monitor issue.
Control Panel>Security and Maintenance>Reliability Monitor activated history is not available but for 1 day, no computer
reliability and problem history is shown in the graphic display. I have a lap top computer with the same setup as my desktop
and deleted BoostSpeed 12 from the laptop. The reliability and problem history started to show up on the chart. I conclude that there is something in the BoostSpeed software that is affecting this control panel issue. Got any fixes?
SSD
I signed up and paid my money, got my License Key. Downloaded version 10 and now it acts like I can't use it for SSD's and wants me to buy the "exact same thing again". WTH is going on???
Order #
Auslogics Disk Defrag & Optimize
I purchased Disk Defrag, and later purchased Boostspeed. Under Boostspeed Disk Defrag I have always been able to Defrag & Optimize. I always run Defrag first (after disk cleanup), then I run Defrag & Optimize. I run these every Monday morning. I use about 19% of my 1T hard disk space. The only other programs are the automatically scheduled startup programs with staggered start delays up to 2 hours, so they should not significantly affect Defrag & Optimize.
Until 2 months ago, the longest Defrag & Optimze ran in 45 minutes or less. The maximum optimized files was about 45,000. When the Microsoft Windows update for June was implemented, the Defrag & Optimize ran over 3 hours. 2 days ago Defrag & Optimize ran for 5 hours 26 minutes with about 64,000 files optimized. The previous Defrag & Optimize was 6 days earlier.
I am a retired college educated computer professional (with all titles from programmer through analyst and manager) with over 40 years of experience. I have defragged computers for well over 25 years.
My question is "why is the Defrag & Optimize running so long and what can I do to speed it up?".
lhenricksen@hotmail.com
AusLogics BoostSpeed
When using AusLogics BoostSpeed of any version (from version 5 to the latest) in the Microsoft Windows 10 Enterprise 2016 LTSB operating system, the reflection of available networks in the system tray disappears when you click on the network icon (both Wi-Fi and local). As well as a keyboard input indicator. Moreover, when uninstalling AusLogics BoostSpeed, this problem is not resolved. Which eliminates the use of AusLogics BoostSpeed on laptops with this system. How can this be fixed?
Microsoft store
Since getting your software i have been running into a some problems with the Microsoft store. I keep on getting errors when trying to dowload items. is there a solution for this?