No me funciona bien el Brillo, y tampoco me detecta los auriculares
mise a jour
programa ya instalado
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Auslogic 13 update problem
software Auslogics
profile
New Problem Notifiction
何回cleanningをおこなってもデフラグや調整項目がある
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Accessing Permission to view photos
play game without lag
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
software updates
in the last few weeks I have purchased several of Auslogics software programs. Since I began using the software, 3 of the programs have been updated with an additional cost. When I originally subscribed to the software I did not expect to have to pay for updates
only after a yearly subscription and the a possible update of the price.Although I have found the software to be good, the prices are somewhat higher than other products on the market such as CCleaner, Malwarebytes and F Secure which I also use with fixed prices for a yearly subscripton withou additional costs for updates. I WILL NOT BE RENEWING THE SOFTWARE AFTER THE ALLOCATED PERIOD BECAUSE MY FEELING IS THAT THE TOTAL PACKAGE YOU PROVIDE IS NOT VALUE FOR THE COST INVOLVED.
PLEASE RESPOND TO MY COMMENTS AS ABOVE. I ALSO APPRECIATE THAT AUSLOGICS SOFTWARE ALLOWS INCREASED MANAGEMENT OF MY WINDOWS 10 PC , HOWEVER I AM NOT CONVINCED THE EXTRA COST IS WARRANTED.
REGARDS, D BOHEMIA
windowsupdateの更新履歴が消えた
Windows11 22h2 osビルド 22621.819
Boostspeed 13.0.0.1
Brightness control not working
Problema con Auslogics Driver Updater
Buenos dias, tengo un problema con la aplicacion Auslogics Driver Update, ya solicite anteriormente me solucionen este problema, inclusive me solicitaron que reinstale el aplicativo, pero no se soluiciona este proble, por favor tengo que actualizar algunos drivers, pero se queda la PC congelada cuando va hacr la actualizacion de dichos driver, para constancia les envio fotos del problema.
Start Menu Disappeared
A few weeks ago while using Windows 10 on my desktop computer, the monitor momentarily went black then came back on. But since then the Start Menu is totally missing. After clicking on Start button, an error message comes up now.
No generic, or cliche answers and then a subjective hardware ?
what should be next PC build under $1000 (not including monitor) give me CPU, HDD,RAM and GPU specs
Impress me!
This is not really a right or wrong answer so pleae cosult your collegaues because it will be challenging to surprise or impress me but there are so many settings on this software that there are bound to be 'Illuminati type of stuff
Boost speed does not recognise pro
Colin Summerfield
Sudden switch to No Error Mode
I am using a ASUS N73S system with W10-64, Windows standard firewall and Kaspersky antivirus. All softwares are update and everything runs fine.
Working with IExplorer and Edge in parallel, suddenly the screen turns black and the system is blocked during 3 or 4 seconds, then the screen pops up again and the system reactivates in Without Error Mode. I have to reboot and the system reactivate in Normal Mode. This looks like a stability problem, but maybe a compatibility case between edge and ie.
Thank you to help me
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Cannot use keyboard Up and Down arrows in Windows Clipboard History since today.
Earlier i selected the copied contents using arrow keys and used Enter key to enter the data, Now its not working, i need to use mouse every single time.
Suggestion / Idea
This is not a question for you, merely an idea for additional software functionality. I think it could be a great feature.
I sometimes look at Event Logs for my Windows 10 PC, usually filtering out 'Information' type logs.
There are often events there that are errors. Sometimes these errors are happening thousands of times a day, but they happen silently and do not appear to impact my day to day work. But they must be hurting performance.
But if there was an 'Analyse Event Log Results' feature in BoostSpeed, which provided helpful feedback to users about those errors and suggested ways of resolving them, I would definitely use it.
I bet it would not be easy though!
Best regards
Phil
Why auslogics boostspeed can't solve this ?
Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud
cleaning done or not done?
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill
Driver update
Hello,
Subcategory is not correct (cannot select something else), please ignore.
I get a message from the driver updater that a driver is not up to date.
It is about PnP-Monitor Lock
It says:
Outdated driver 16.10.46.576 of 21/01/2019 Remote Utilities LLC
New driver 1.0 15/06/2015 BenQ Inc.
How is it that a newer driver is outdated?
Should I install the older driver?
Screens Blacks Out (Stops Displaying on Minor Electricity Surges from Fridge-Freezer)
Windows 10 Restart Stalls
If it wasn't for windows updates I could live with not using the restart option. However, windows update requires the restart so I expect it to fail each time there is an update. Recently did scan and did the suggested tweaks in the Maintain section of BoostSpeed 11. Any thoughts or suggestions?
Blank Windows Security Window
Suggestions wecome. My understanding is that Defender is operating but not lettting me see that it is operating. I wish I could be sure of that.
Не получается запустить.
Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)
Режим сна
Remote Desktop Service is disable by some process
My IT department believes some way the Auslogics BoostSpeed 11 software is disableing the Remote Desktop Service. I work from home offten and I need to connect to this PC to develop and technical support of our users. How can I find if your application is changing the service to disabled?