I have an anti-virus program that always run and notified by Boostspeed (an item just added into.... start-up), "C:\Program Files\Bitdefender\Bitdefender 2017\bdagent.exe" , in the Registry/run of the Startup Manager. How can I mute this particular notification from poping up? It is too frequent.
I suggest an exception based notification where we can right-click a particular line in the Startup Manager to mute the message, but still allow it to execute (on startup).
thank you, hoping this feature will still be in version 12.
By-the-way, I could not find "Bitdefender" in the subcategory drop down list for this subject.
what should be next PC build under $1000 (not including monitor) give me CPU, HDD,RAM and GPU specs
This is not really a right or wrong answer so pleae cosult your collegaues because it will be challenging to surprise or impress me but there are so many settings on this software that there are bound to be 'Illuminati type of stuff
I used Boostspeed 11 for some time and never had temperature issues, after de Boostpeed 12 upgrade I noticed that the fan started to make annoying noises and checked the temperature of my Laptop with the Core Temp 1.16 program which says the temp goes above 90 degrees Celsius.
Tried to install 12 again with no result.
Now back to 11 again and the temperature is normal again.
My question is this a normal behaviour of the 12 version of boostspeed?
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Ваша программа периодически выдает сообщение о перегруженности процессора моего ПК и отсылает к "подробностям". А подробности - это сканер всех работающих и неработающих программ в компьюторе. Ваш сканер при этом никоим образом не оценивает важность запущенного процесса для работы компьютера. По сопровождающим характеристикам определить возможность отключения того или иного процесса очень трудно. Тогда какой смысл ваших обещаний "оптимизировать работу компьютера", если инструментов, реально выполняющих эту фунцкцию в части отключения второстепенных процессов, вы не предлагаете?
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
This is becomming annoying. I keep getting alerted that a new version of BoostSpeed is available. I've downloaded 220.127.116.11 and ran the installation which prompts that it is removing with re-start and then I have to manually install the latest download. After three successful runs with this I still end up with version 18.104.22.168 What gives?
I want to turn on Location services so that my display automatically dims and cuts out blue light when the sun sets. However when I go to 'Night Light Settings' and then under 'Schedule' access 'Location Settings' I am informed that "Some of these settings are hidden or managed by your organisation" and the 'Change' button is disabled.
What Organisation? This is my personal desktop not managed by anyone but me.
Pleas could you help with this issue.
When loading Auslogics Disk Defragmenter, I get the following message box:
Auslogics Disk Defrag 9
An error occurred while loading Library.dll.
Error code: 0x0000007E
Error message: The specified module could not be found.
I've tried to uninstall the program, but get the message box:
Runtime error at (180:3568):
Exception 'EAuslogicsIntItException" at address 0049E613
Why woud you duplicate file finder delete the original video file from my computer instead of the empty file with the same name in itunes and leave me with all my videos gone and a bunch of movies I can not use or watch in itunes
That was hours of work for me and now I have nothing left and have to start all over and that was over 100 movies I downloaded
How is that a helpful program a duplicate means duplicate in every way not just in name
At this point, I'm about ready to pull all my hair out. I can't seem to find the cause. The only finding has been:
BIOS and chipset behavior
The highest measured SM BIOS interrupt or other stall was 127 microseconds. This is considered poor behavior. Your system may have difficulty handling multimedia in real-time and may be subject to unexpected stutters and unresponsive behavior.
Generally, copy and paste do not work with mouse druppin a meny. Now, I have to use tne keyboar,Control "c" to copy and control.'V' to paste. this has slowed my ompute use condiderably.
somtimes I can see a quick flas of the menu, but it disppears befoe any action can take place.
Any help to correct this would be appreciate. Thank You
since updates to win 10 my laptop no longer has functioning shift keys. i have checked sticky keys etc are all off. i have deleted driver for keyboard, restarted laptop to reinstall driver. i have been to laptop compies website and can find no driver updates for my model. acer 771555z.
I have had a Fujitsu S1500 ScanSnap scanner on my computer since I got it. Something happened lately (probably a refresh of Win10) and the program, ScanSnap Manager, stopped opening automatically when I turned on the scanner (connected by USB). After trying every remedy I could think of, I uninstalled the ScanSnap software, and cleaned the registry, figuring that I would reinstall the software from the original disk.
But even though I've done everything I know how to do to wipe the computer free of any traces of the original program, as you can see from the attached screen shot, the installer is not letting me install the program as it thinks there's a version already on the computer. There's nothing in installed programs, nor the registry, related to this program. And I force uninstalled it too. At this point I'm unable to use my scanner. Help!
Note that the subcategory of this question is not "Get Help" but your UI won't let me submit a question without choosing something, and the program in question is not in the dropdown list becuase it's already been uninstalled.
I can not find a way to BLOCK New Auslogics Notifications of upgrades . I have blocked Registry notifications tring to end pop ups of Auslogic Up-grades . IF you can not seem to have FREE upgrades for presently purchased Auslogics 11 , then simply place your up grades into an Auslogics 12 and STOP bugging members with you desiring money for upgrades . Your Subcategory answer question makes NO sense ! This is an Auslogics 11 Programming delima ,none of the subcategory comment shown above have nothing to do with Auslogics 11 , that I know of, as of yet.