Tiny Font
Adding Subtitle to Movie
Gostaria de ter
É possível que a AUSLOGICS adicione ao BoostSpeed algo como o Partition Master, algo que ajude a solucionar problemas mais profundos nos HDDs?
Windows News Widget in the Taskbar
Microsoft Edge and...
vignettes
Pour les voir il faut les ouvrir les photos dans leur lecteur.
Peut-on les récupérer?
J'ai déjà suivi les indications usuelles de Windows sans résultat.
Est-ce une coincidence?
Merci.
Versionsunterschiede von DiskDefrag zu DiskDefrag Ultimate
Der Preis von 21,56 € ist ja beiden identisch.
WindowsUpdate Not working due to corrupted files & MSOffice 10 Prof does not install
проблема с загрузкой
снижение пинга
Нужна помощь в снижении пинга в сети.
После прогона internet optimizer пинг по прежнему остается высоким на разных серверах (в районе 200-300ms)
Есть ли возможность сделать что либо еще?
Display and touchpad
Duplicate fiel search on networked drive
Does Auslogic have a product that will do this? PC is WIndows 11 Pro. Nwtwork is wired and with a L2 managed gigabit switch using DHCP and static addresses. Looking to aviod downloading backup folders to a Windows PC and using a duplciate file app then uploading back to the NAS.
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Regarding default setting problem
I am unable to set WORD 2016 as my default app, i tried all the solutions i came accross but could not do it, clarify and resolve it kindly
BoostSpeed wird permanent von Avira gelöscht
Sehr geehrte Damen und Herren,
mein Antivirusprogramm "Avira Antivirus Pro" stuft BoostSpeed permanent als Bedrohung ein und löscht es.
Gestern wurde BoostSpeed 3x gelöscht!
Hierfür hätte ich gerne eine Lösung von Ihnen erfahren.
Mit freundlichen Grüßen
Prösch
Unable to uninstall application using Uninstall Manager of Boostspeed 11
I installed SmartDraw2020 application (free version) from the Net. Now, when I want to uninstall it, it is not showing up either in control panel or in BoostSpeed under Uninstall Manager tab. There is Uninstall option for this App when I access through Windows 10 Start Menu (see screenshot attached), but it is not uninstalling from there, due to some error (Could not open Install.log file message).
I am surprised why it is not even listed in Boostspeed under Uninstall Manager. Can you please help me?
error code 46362C1-0B211304-00000A09
It has been driving me crazy for months now.
46362C1-0B211304-00000A09
Thanks,
Jim
Latest BoostSpeed Version
This is becomming annoying. I keep getting alerted that a new version of BoostSpeed is available. I've downloaded 12.0.0.2 and ran the installation which prompts that it is removing with re-start and then I have to manually install the latest download. After three successful runs with this I still end up with version 12.0.0.1 What gives?
Want the operating system files checked and to be fully operational.
Check to see that all critical and necessary files are completely intact and functional like SFC /Scannow, and any other method you know of, so that when I go to re-install Windows 10 it will go smoothly and without a hitch! An example is that I can no longer use the pin I assigned to windows it just stopped working one day. And I've always had problems with the startup files from all versions of windows. Like my 1st install of windows 10 went bad because of the User.dat files getting corrupted, I couldn't repair windows, and I doubt that I could run restore and it would work. And I don't want to install windows 10 until I know it's going to run correctly.
I do nothing to corrupt files but they always seem to get screwed up by the operating system.
Thanks, L8R
key product W10PRO missed
Hi, I have AuslogicsBoostSpeed 11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
windows product
windows product ID for win 10 Pro is erroneous number as reported in system information
Sounds like a quiet popping when playing music offline or online.
Temperature raises very high when using Boostspeed 12
I used Boostspeed 11 for some time and never had temperature issues, after de Boostpeed 12 upgrade I noticed that the fan started to make annoying noises and checked the temperature of my Laptop with the Core Temp 1.16 program which says the temp goes above 90 degrees Celsius.
Tried to install 12 again with no result.
Now back to 11 again and the temperature is normal again.
My question is this a normal behaviour of the 12 version of boostspeed?
Сброс настроек входа в систему Windows
Добрый день!
Каждый раз при использовании сканирования системы утилититой, после перезагрузки сбрасываются пароли для входа в Windows. Настройки сканирования ни к чему не приводят. Спасибо.
Stop code issues
My unit keeps crashing and indicating stop code: IRQL_NOT_LESS_OR_EQUAL. I have tried every thing I know with no success.
Please help.
Thanking you in advance,
Coach Rod
werid big files on my D drive
see file.
Idk what is it?
Should I deleat it or keep it?
takes 7 hours to defrag 18 files on a portable HD
Why is it taking 8 hours to only defrag 18 files on an "easystore" 5TB portable HD. 790 files on this HD is said to be fragmented. at this speed, it will take me months to defrag this HD. can I speed up the defrag speed?
boostpeed 11
I've uninstalled and reinstalled boostpeed 11 four times now. Is there a bug on the task scheduler. it's kee[s crashing the program. and I have to manually start the maintenanace daily now.
registry cleaner
tried to use it but received message it has to be reinstalled. I need instuctions how to install.
Disc Error
It is still showing errors on Disc Doctor and advises running CHKDSK on restart
As soon as I Scedule a disc scan on restart - it completely messes up the system reloading - and PC will not boot
I have a disc image I took - using acronis so I can use a boot disc and restore - but each time I try to fix the "disc error " my machine will not boot. Is this an SSD error
Advice please
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb