1859 questions
Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
Error 0xc1900101
Dear Sir/Madame,
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
Kamil Adamski
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
Kamil Adamski
mise à jour logiciel
Bonjour,
Hier j'ai payé le renouvellement de mon abonnement à auslogic Bootspeed 11, et je ne vois pas de mise à jour sur la validité de mon programme qui expire demain.
Pouvez vous me dire si mon paiement à bien été enregistré ? et si mon logiciel va être mis à jour ?
Dans l'attente de vos réponses.
Cordialement.
Hier j'ai payé le renouvellement de mon abonnement à auslogic Bootspeed 11, et je ne vois pas de mise à jour sur la validité de mon programme qui expire demain.
Pouvez vous me dire si mon paiement à bien été enregistré ? et si mon logiciel va être mis à jour ?
Dans l'attente de vos réponses.
Cordialement.
Error Message
After running Bootspeed for the first time in a long time, I get the error message, "The operating system is not presently configured to run this application." It affects my Bluetooth, plus it is annoying to have the error message popup on my screen every five minutes. Do you recommend that I go to "Restore Points"? I have an early February date available.
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
que software utilizar para convertir word a Pdf y viceversa
como se abren archivos word de una carpeta sin que se conviertan a Pdf y viceversa
Can't scan disk space
I've been using BoostSpeed successfully on Windows 7 for many years. It hasn't been working for the last 2 months. When it scans the disk space, it gets stuck on a temporary Skype file, and stops scanning. To fix this, I have to re-start my computer, and re-install BoostSpeed 12. My computer has been running painfully slow for the last 2 months. PLEASE HELP!
ESENT Help.
svchost (3804, R, 98) SRUJet: New log file cannot be created because the database cannot write to the log drive. The drive may be read-only, out of free disk space, misconfigured, or corrupt. Error -1032.
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
Eliminar una partición creada por Windows
Mi laptop HP tiene una memoria de 120GB. De los cuales hay una partición llamada HP_RECOVERY (G) que ocupa 21GB.
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Right Click Menu
Hello, My question is this: From time to time when I right mouse button click on a file on the desktop or in a folder the computer just freezes with the little blue circle turning for like 20-30 seconds before the right click menu will pop up, it does not do it all the time and seems random and there does not seem to be a reason for this, I have followed all the tutorials online that I could find and that is even why I purchased your software but nothing seems to solve this annoying issue, hopefully you can help. I am also attaching a screen shot to my computer spec details
windows photo viewer suddenly missing
since years I'm using Windows Photo Viewer to see my pictures (jpg and others)
Suddenly this possibility disappeared, I think due to an automatic update of my system by Microsoft. With the option "open with", I
only get PAINT and 3D PAINT, but I'm not intersted in those programs.
I can find the folder Windows Photo Viewer in my Program Files, but this folder has two subfolders (one Eng and one NL) and both are empty. I don't understand why, because I didn't was deleting them.
I heard it is possible to restore the old PhotoViewer in Win 10 , by inserting a register- script.
Can you help me to find that script ?
Thanks on beforehand.
Jacques Valembois
Suddenly this possibility disappeared, I think due to an automatic update of my system by Microsoft. With the option "open with", I
only get PAINT and 3D PAINT, but I'm not intersted in those programs.
I can find the folder Windows Photo Viewer in my Program Files, but this folder has two subfolders (one Eng and one NL) and both are empty. I don't understand why, because I didn't was deleting them.
I heard it is possible to restore the old PhotoViewer in Win 10 , by inserting a register- script.
Can you help me to find that script ?
Thanks on beforehand.
Jacques Valembois
Graphics Card
The results of the "Maintain" application suggested that I upgrade my card from 8.1 to 9.0 and above. How do I do this?
Windows freezes frequently
I cannot seem to resolve the freezing problem. sometimes it freezes after a very short time after start-up and occassionally it works for quite sometime before it freezes again.
Do you have any suggestios what I can do to stop this or how I can find what may be causing this.
I am not a technical person so any answer have to be spoon-fed.
Thanks
Host Services for Windows Processes
Does Boost speed address excessive memory use by Host Services f or Windows Processes? This app is continually hogging 1/3 of my PC memory.
Malware install failure error
see attached. This happens every time. Chrome, Brave will not allow. Edge gives error.
Something happen to this device after i ran internet optimization
Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
problem after running resolve all issues early this morning
All devices listed under sound video and game controllers have yellow error triangles and when you open properties for each it shows "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)" I have rebooted, uninstalled all and rebooted and nothing changes usb audio has red x and no audio output device is installed and usb camera says camera in use by another app. I have disconnected both after uninstalling in device manager, rebooted then plugged them back in all still come up with error triangles and audio / camera are not functioning.
cannot open links in OUTLOOK
I cannot open hyperlinks in Outlook. My system is always saying that opening isn't allowed.
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
Thumbnail files disappear
After run the Scan and optimize the windows, I found the thumbnail cache files were disappear. How can I recover?
Because I waste much time to open and preview the photos and video thumbnail in Windows Explorer.
And how can I prevent the BoostSpeed delete my thumbnail cache files in my Windows 10 in the future?
Thank you very much!
Because I waste much time to open and preview the photos and video thumbnail in Windows Explorer.
And how can I prevent the BoostSpeed delete my thumbnail cache files in my Windows 10 in the future?
Thank you very much!
WiFi keeps disconnecting
For about 9 months now often when I click to go from one webpage or website to another my Wi-Fi disconnects. I either must reconnect via the Internet icon or when I run the Windows Network Diagnostics it always tells me that "The default gateway is not available" and it fixes it. I have run all sorts of 'FIXES' found on the internet but still not fixed.
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
pc unplugged ac adapter pc shuts down with battery charged at high percentage
my laptop has new battery, but when i unplug the AC adapter my laptop shuts down when it has a high charged percentage battery. how in settings to fix please.. oh, and my battery cannot be taken out in my asus pc
key product W10PRO missed
Hi, I have AuslogicsBoostSpeed 11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex
Keyboard issues.
I've just updated to windows 10 May update, have now completely lost functionality of shift keys.
Delete"pagefile.sys"
Please edit a BAT file to clean up the C disk for me.
My Email"
Content hidden to protect privacy
"Thank You Very Much. I wanna delete"pagefile.sys"
registry cleaner
tried to use it but received message it has to be reinstalled. I need instuctions how to install.
Window.old folder
Hello¨
The PC had Update to 2004 Versione, now has the PC ond big 30GB Windows.old folder. why can i the folder delete
The PC had Update to 2004 Versione, now has the PC ond big 30GB Windows.old folder. why can i the folder delete
Démarrage anormal
Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?
My Windows 10 Pro version asks for activation
Hello,
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
windows product
windows product ID for win 10 Pro is erroneous number as reported in system information
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7