Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
Error 0xc1900101
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
Kamil Adamski
mise à jour logiciel
Hier j'ai payé le renouvellement de mon abonnement à auslogic Bootspeed 11, et je ne vois pas de mise à jour sur la validité de mon programme qui expire demain.
Pouvez vous me dire si mon paiement à bien été enregistré ? et si mon logiciel va être mis à jour ?
Dans l'attente de vos réponses.
Cordialement.
Error Message
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
que software utilizar para convertir word a Pdf y viceversa
como se abren archivos word de una carpeta sin que se conviertan a Pdf y viceversa
Can't scan disk space
ESENT Help.
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
Eliminar una partición creada por Windows
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Right Click Menu
windows photo viewer suddenly missing
Suddenly this possibility disappeared, I think due to an automatic update of my system by Microsoft. With the option "open with", I
only get PAINT and 3D PAINT, but I'm not intersted in those programs.
I can find the folder Windows Photo Viewer in my Program Files, but this folder has two subfolders (one Eng and one NL) and both are empty. I don't understand why, because I didn't was deleting them.
I heard it is possible to restore the old PhotoViewer in Win 10 , by inserting a register- script.
Can you help me to find that script ?
Thanks on beforehand.
Jacques Valembois
Graphics Card
Windows freezes frequently
I cannot seem to resolve the freezing problem. sometimes it freezes after a very short time after start-up and occassionally it works for quite sometime before it freezes again.
Do you have any suggestios what I can do to stop this or how I can find what may be causing this.
I am not a technical person so any answer have to be spoon-fed.
Thanks
Host Services for Windows Processes
Malware install failure error
see attached. This happens every time. Chrome, Brave will not allow. Edge gives error.
Security Center in Vista
I am having issues with the nonfunctioning security center in Windows Vista 32 bit / desktop I KNOW , I am unsupported !!! Maybe you can help ?
Постоянная загруженность диска на 100%
Добрый день!
Диск постоянно работает на 100% в диспетчере задач, что замедляет работу системы
В чем может быть проблема?
Auslogics 12 Downloading
deleted activation informations of windows10 pc
I was obtained next messages. Maybe other sofware's Activation informations were destroyed.
（1）C:\ProgramData\Stardock\Fences3\License.sig was deleted.
The first massage is that reactivate fences 3. (Activation code is neaded)
（2）In the case of Auslogics driver updater, my activation code exceeded the limited number of activation.
And the costomer service replied me by mail that they cannot refresh my activation code.
（3）Next massge window opened that I rejister again Sound Blaster of Creative Teclonogy co.
(4)From now on, what do I do to prevent missing activation informations of my Windows10 pc.
Internet explorer
I don't use IE can I uninstall it as there are many items that will attach to it example is Roboform (password manager) and I wonder if IE contributes to ecess bagage.
Unable to make screen lighter or darker
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Error mesage
I recently installed Microsoft Office 2019 on my Win 10 computer. Each time I use your Bootspeed 11 software, and when I access my Office 2019 software, I get an error message "Operatng system is not presently configured to run this application". What can I do to correct this? I am reluctant to use Auslogics software if it continues to prevent me from accessing my MS office software. Please advise. Thank you.
C922 Pro stream webcam
Any idea ??
No Disk DeFrag menu option in Auslogics 10
I installed this today, paid $30.00 dollars for it (after using a free verison for years), and after one attemot at optimizing my SSD on my Acer Laptop, the prgram restarted after completion and when it did it no longer has the menu option to actually defrag anything. the only menus i have are "reports" "Portable version" "ask a question" and "auslogics store".
what's going on?
thanks,
Brian
My Computer is Running Very Slow and I cannot get this one Windows Update to Install- HELP
Недопустимое значение реестра при попытке открыть JPG файлы
Здравствуйте!
Не могли бы помочь со следующей проблемой.
После сканирования и устранения ошибок программой BootSPeed при попытке открыть файлы JPG кликом мышки появляется сообщение "Недопустимое для реестра значение".
Спсибо,
Валерий.
Logitech C920s
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
Location in Privacy setting
Thank You
Ipv4 and Ipv6 not connected
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb