Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Screen Size
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Chales Waltz
ERROR 80073712
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
System Booting
определение местоположения
Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.
Интернет-соединение
Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
Printer Interference
keep losing saved tabs
graphics card
Postgrest SQL_Службы Microsoft
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Computer Freeze on Restart and Shutdown
Hello,
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Eli
windows 10 up grade
how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
no sound, drivers not there
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
No thumbnails
Can you help?
Глубокая очистка файлов
Здравствуйте! После выполнения глубокой очистки файлов перестало работать стандартное приложение Windows "Кино и ТВ". Исчез exe-файл - 0 байт. Прошу учесть при подготовке обновления BoostSpeed 12, а также подсказать - как востановить приложение "Кино и ТВ"?
С уважением,
Виктор Оплеснин
No se le da acuse de recibo cuando envia alguna informacion. (Es una recomendacion positiva Suprema.
BoostSpeed 11 Pro being used with license: Cuando el cliente envia alguna informacion a Auslogics, si Auslogics no le da un acuse de recibo, aunque pudiera ser breve, el cliente tiene dudas de si Auslogics lo recibio.
Host Services for Windows Processes
Error Message
Necesito una solucion
puede que halla activado algo por accidente de este programa y ahora ya no puedo cambiar el brillo de la pantalla no encuentro ninguna configuracion, tampoco es un problema de controlador grafico ya lo actualize.
Ayudenme a solucionarlo
Temperature raises very high when using Boostspeed 12
I used Boostspeed 11 for some time and never had temperature issues, after de Boostpeed 12 upgrade I noticed that the fan started to make annoying noises and checked the temperature of my Laptop with the Core Temp 1.16 program which says the temp goes above 90 degrees Celsius.
Tried to install 12 again with no result.
Now back to 11 again and the temperature is normal again.
My question is this a normal behaviour of the 12 version of boostspeed?
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
Error system
Your Defrag program
Can you explain this? I downloaded the "free" defrag version last Saturday. It worked perfectly. On Sunday, I dod my usual maintenance, which includes defragmentation and back-up. Again, it worked perfectly. Today, when I was working I got a message indicating that a "defragment" was urgently needed. So I did yet another defragmentation. Then, for some reason which
I cannot explain, I downloaded the "pro" version of your product. Once it was completed, I did yet another defragmentation. To my surprise, there were files that required yet another defragmentation. My question is, why? Should I really trust that your software is actually doin what it is supposed to?
Speaker Headset or head phones is unplugged message
Перестали работать порты
Can't open my Chinese typing software
I am a new user of your company's product - Auslogics BoostSpeed. After I use the boostSpeed, I can't open and use my Chinese typing software (倉頡 and 速成) in window 10.
I went to the Setup > Time and language > language, and still can't find a way to open it.
In BoostSpeed, I don't know how to undo it, so I can use my Chinese typing again.
Please help me solve this problem. Thanks.
Best regards.
Soni
New update fails to open
I have auslogics BoostSpeed 12 Version 12.0.0.4 I get a message that their is a new version available to download and install.
I download the install program auslogics-boost-speed-setup.exe
When I click on the install program I get the error message that the filename, directory name or volume label syntax is incorrect and then the program dissappears. I have enclosed two screen shots. I am unable to install the upgrades. Please help.
Как устранить неисправность
Операционная система не загружается. После включения компьютера загрузка операционной системы прекращается, колёсико всё время крутится и крутится. Такое положение может продолжаться и 1 час, и 2 часа и 4 часа. Больше не пробовал. Иногра, но очень редко, после неоднократного включения-выключения компьютера он вдруг после включения через 11-13 секунд, загружает операционную сисчтему, как это происходило после его покупки в магазине,
Вопрос:. В чём заключается неисправность и как эту неисправность устранить?
Windows search indexer
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
defrag 10 running sooo slow
Used to run fast, I have changed the advanced settings, now running slow,
I guess you cannot know which advanced settings I have enabled, (most of them)
what do you think? and what is your best guess as to my problem?
No me deja instalar programas pues este me devuelve una referencia
Windows Blue Screens
Hey,
Im getting a lot of windows blue screens, Kernel issues and Server exceptions and memory as well, i did a lot of testings like memory testings, when i do windows file check, when i run CHKDSK check in cmd i get files are NTFS error, Any help?
New in blog
See allRecommended
DOWNLOAD NOW
Download size: 12,8 Mb