1897 questions

Driver is Unavailable

My Win 10 (64bit) PC can find my Epson printer on my local network, connected by ethernet cable to my router, and installs the "necessary files". However, afterward in my settings it shows the printer with "Driver is Unavailable" and nothing will print. Both my wife's PC and all of our iPhones/iPads have no issues printing so I know it is connected properly and functional. The only device having an issue is my PC. I have removed the printer and reinstalled it multiple times with the same result. I have also downloaded and installed the newest drivers available from Epson for this printer but somehow my computer does not seem to be able to find or recognize them. A support request has been sent to Epson but so far any suggestions from their automated response system have not be successful.
745 views
Sep 16, 2023 at 12:58 PM

G-HUB

Since I updated the USB driver my G-HUB with logitech dosn't recognice my keyboard or mouse. What shall I do?
847 views
Sep 16, 2023 at 12:24 PM

Actualizaciónes

¿Siempre es mejor actualizar todo el software (windows, sistema operativo, apps, drivers, etc.) a la versión más reciente que se vaya publicando? o cuando todo está funcionando en forma correcta ¿es mejor detener las actualizaciones para dejar todo como está y que se mantenga todo funcionando en forma adecuada?
693 views
Sep 15, 2023 at 06:57 PM

Bricked my HP Evo Prod ID 669a1ua after driver update

So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
635 views
Sep 13, 2023 at 08:52 PM

low speed of windows

Hi
the speed of my windows is low
what can i do for this
580 views
Sep 11, 2023 at 02:42 PM

message

high system resourxce notification--change settings.What do i do to rectify thuis matter?
606 views
Sep 10, 2023 at 12:59 PM

ドライバーアップデーター

ドライバーアップデーターがファイイヤーウオールの設定を確認してくださいと表示されます
560 views
Sep 10, 2023 at 12:11 AM

usage

not good working
606 views
Sep 09, 2023 at 06:23 AM

Windows Update

Error message: "Your device is missing important security and quality fixes.", tried several fixes...no result.
565 views
Sep 09, 2023 at 02:19 AM

DRIVER UPDATER REFUSES TO CONNECT

Any idea as to why this is happening? I have registered the program in the WIN firewall, but no success. All other Auslogics software is working without a hitch.
Thanks for your help!
James
890 views
Sep 07, 2023 at 07:29 PM

heute kein Zugang zum Abruf der Treiber-Daten

Gibt es ein technisches Problem beim Zugang zum Datenserver?
558 views
Sep 07, 2023 at 02:18 PM

windows search

não consigo usar a janela de activar ou desativar funções do windows
530 views
Sep 06, 2023 at 11:26 PM

Mots de passe

Bonjour,

BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?

Cordialement
Denis Schmitt
578 views
Sep 06, 2023 at 05:34 PM

USB

I had my PC repaired (for a new heat sink) and
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?
505 views
Sep 06, 2023 at 05:11 PM

Luz noturna

A luz noturna deixou de funcionar, não posso mudar para a cor mais suave
539 views
Sep 04, 2023 at 05:13 PM

Anti-virus

Bonjour !!

J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.

Dois-je craindre la même chose avec CCLEANER ?

Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...

Cordialement,

Eric
533 views
Sep 02, 2023 at 07:49 AM

Velocidad de la computadora

¿Qué puedo hacer para que mi computadora siempre funcione lo más rápido posible?
663 views
Sep 01, 2023 at 08:33 PM

Trial

Hey huge fan and long time user of the free edition and was wondering can i get a week trial please as im thinking of buying ? My PC is still running crappy


Thanks in Advance
584 views
Sep 01, 2023 at 08:04 PM

Fehlermeldung

Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:

failed download failure

was verhindert die Aktuallisierung bei dem Programm.

Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro

mfg Klaus Schwabe
595 views
Aug 31, 2023 at 10:32 PM

Problème fonctionnement Bluetooth

Bonjour, suite à une mise à jour de Windows (?), mon clavier Bluetooth n'est plus reconnu. Dans "paramètres", il est indiqué : installation bloquée par stratégie de groupe.
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
613 views
Aug 31, 2023 at 10:07 AM

Hirosuke Kajiyama

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

License key ライセンスキー:
Auslogics BoostSpeed 12

Content hidden to protect privacy

1077 views
Jan 25, 2022 at 06:46 AM

猫モードについて

家族も本ソフトを持っておりますが、家族の環境ではメンテナンス画面で猫モードの表示がありません。

設定などによって猫モードが表示されないといった条件などがありますでしょうか。

1076 views
Jul 21, 2020 at 07:09 AM

I want to remove the arrows on the deskyop icons

I want to remove the arrows on the deskyop icons, see the enclosed picture

Tony Bell
1076 views
Apr 28, 2021 at 12:04 PM

Напортачил...

Я перенёс папку "Загрузки" из положения по умолчанию на диск D, но не создал отдельной папки, и теперь "Загрузки" - это весь диск D. Получается бардак.
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.

Как вернуть положение по умолчанию???
1075 views
Oct 25, 2020 at 11:38 AM

Updating to the newer software

Everytime I try to update the software, it goes through all the steps, but does not do the update. It continues to show the original version and reminds me to update again. I have tried this about 10 times with no success.

1075 views
Dec 01, 2020 at 05:20 PM

One Click Scanner

The former version of BootSpeed -one click Scanner was running much faster that the new one (version 11).
Is that logical ?
(forget the hereabove Subcategory)

1073 views
Sep 27, 2019 at 05:06 PM

Defragmenter related question

There was no option for auslogics defragment so i chose a wrong category.My question is about defragment.Does defragmenting the hard disk HDD daily damage the hard disk or corrupt it ?

1073 views
Mar 20, 2021 at 05:50 AM

Good Day

Hi,i have a question i would like to ask about my pc about movie or video streaming because everytime when i watch something on my laptop it pauses itself without me pausing it and i would like to know how it happens and a possible solution.
1073 views
Mar 28, 2022 at 07:58 PM

Windows Bitdefender

The Window Securitu System detects a Trojan in the Auslogics Speedbooster TaskManager.
Do I have a problem?

See attached file.

Sorry it is in French

1073 views
Jul 19, 2021 at 04:38 PM

MSFS e Windows10 PRO

Hi, I own BS12 on two pCs. One PC I use only with gaming apps and the other and I use it exclusively for home, online and with the web. BS12 on pc where I don't play works great. BS12 that works on the pc where I play and in particular with Microsoft FlightSimulator, BS12 after thorough cleaning tends to get your PC blocked. I tried to exclude gaming apps but apparently windows is tightly connected. I had to reinstall windows 10 pro. In my opinion, it also depends on the Deep-Clean function and Empty Folders Cleanup. I can't use these two functions. On the pc where I play I am not satisfied! On the pc I use for all other functions is OK. Tips?
1072 views
Apr 15, 2021 at 08:12 AM

Boost Speed 12 running very hot

Not really settings. See below!


When running, Boost Speed 12 R 12.0.0.2 and Bit Replicator run very hot with littlel or no explanation! I realize that at start up they will kick in. Later it should not be active.
After a scan, the system is showing 51% on BoostSpeed?????
What is going on?

Buddy Seigel

1072 views
Jan 18, 2021 at 08:18 PM

CPU Usage

I'm new to the softward. Running v12.

Auslogic is running in the background, I guess. (I didn't start any actions since my recent reboot.)

It's using between 25 and 40% of my CPU capacity. I DO NOT want that to happen. If something's running on its own, how do i schedule it to run during the night.

Why is it doing that? What's running? How can I keep it from starting a process on it's own.

(I know i can hit "End task" in Task Mgr, but I wanted to know how to prevent this in the future.)

Thank you,

SjK

1071 views
Jan 27, 2021 at 02:35 PM

free space wiper

Hello
Do you suggest free space wiper


thankd

1071 views
May 11, 2020 at 04:44 PM

F keys

None of my F keys are working. How do I fix this?
1069 views
Jun 22, 2022 at 03:23 AM

Must re-enter product code in Fences after weekly scheduled maintenance

Hello,

Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.

Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.

If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?

Attached is the dialogue box that appears requesting to re-enter the product key.

Thanks,
Rich Sullivan

1069 views
Mar 22, 2021 at 08:41 PM

адаптер блютуз

Здравствуйте! У меня стоит 7 проф, подсоединил блютуз адаптер ВСМ20702. Устройства видит, но драйвера не ставятся, соотвественно не работают. Пытался обновить, результат тот же. Устройства - айфон 6с, jbl колонки и пр.
1068 views
Oct 11, 2021 at 01:20 AM

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1068 views
Apr 14, 2021 at 08:05 AM

Deep disk cleaner

Bonjour
Un message m'indique que Deep Disk Cleaner ne peut pas étre lancé lors du démarrage de Boostspeed. Comment puis je le réinstaller ?
Merci de votre réponse.

Cordialement

Laurent MESNIER

1068 views
Jun 05, 2020 at 04:53 PM

AYUDA

como utilizo la aplicacion
1067 views
May 03, 2021 at 11:16 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

1066 views
Mar 27, 2021 at 09:53 PM