1858 questions
computer slow
hello my computer is 7 yrs old barely anything on it but slow what can i do to improve overall maintenance
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
profile
i have windows 7 windows will log me on as temp profile unsted of administrater i googled this question and is sent me to your site says to download your registery cleaner run it and myproblem is solved but it didnt work please help
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
play game without lag
i am playing the game is heavy than 60gb so i have a question
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Пропажа значков
Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте
Bootspeed 13
I recently received an emil in regards to Bootspeed 13, unfortuanatly I didnt follow it up because of Covid, now that I am better I would like to put my name down for ithe upgrade.
kind regards chris moore
kind regards chris moore
Unable to Install the new Auslogic Boostspeed 13.0.0.1 update
Hi
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
Question about conflict with avanced programs
Hi, i have installed in my notebook windows 10 home some avanced programs, my question is... if i install Auslogics Boostspeed 11, what configuration i need to make? I dont like to have problems with this avanced aplications
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
Проблема с HDD диском
Доброго времени суток. у меня случается проблема с жестким диском (seagate barracuda 1TB), при работе прогрмм находяшихся в нем, он часто вылетает. Замена сата порта и сата кабеля не помогает. Диск относил в сервес центр, говорят исправен. Помогает только ваша программа Auslogics boostSpeed, но помогает где то только на месяц пользования компьютером. Что мне делать?
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Windows Blickpunkt-Bilder
Nach BoosSpeed12 wechseln die Windows 10 Blickpunkt-Bilder nicht mehr und muß von mir manuell repariert werden. Welche Einstellungen können das verhindern?
504 Auslogics files designated as Malware
504 Auslogics file were identified by Malwarebytes as being potential Malware.
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
I am unable to switch to keyboard Chinese Input Method after using Auslogics BootstSpeed
After using the Auslogics BootstSpeed and the function of cleaning the Registry files, I found that I am not able to switch back to Chinese input method anymore and I can only type in English. I tried to type the hotkey "Left Ctrl +Shift", nothing happened. I tried "Ctrl + Space" or "Win + Space", also nothing happended. The small icon at shows "EN" at the bottom right corner was disappeared (see attached).
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
Postgrest SQL_Службы Microsoft
Добрый день!
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
System Booting
When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
Malware
Does your program detect Malware? I have been getting the blue screen of death and the reason listed is
System Service Exception
What failed: Dot 4 sys
System Service Exception
What failed: Dot 4 sys
Memory management
Ultimamente y con frecuencia tengo un problema con Windows 10. Aparece una pantalla azul con un problema de Windows Memory Management. El sitio de Microsoft recomienda ejecutar desde Power Shell "dism /online / cleanup-image / restorehealth". Eso ya lo he hecho varias veces, pero aún sigue apareciendo el problema. ¿Hay alguna herramienta de BootSpeed 12 que pueda resolver este problema?
Recently and very frecuent I got a problem with Windows 10. Blue screen error with mesage MEMORY MANAGEMENT issue. Then I must to turn oof the PC and reboot. Then from Power Shell, run "dism /online / cleanup-image / restorehealth". After several minutes the problem (¿?) is fixed, but after some time, this happend again and again. BootSpeed has any tool to check and fix this problem?
Recently and very frecuent I got a problem with Windows 10. Blue screen error with mesage MEMORY MANAGEMENT issue. Then I must to turn oof the PC and reboot. Then from Power Shell, run "dism /online / cleanup-image / restorehealth". After several minutes the problem (¿?) is fixed, but after some time, this happend again and again. BootSpeed has any tool to check and fix this problem?
laptop acer aspire 5735Z
after I ran bootspeed and tutorals 1-4 my laptop will not shutdown it starts to close then boots to sign in page only way i can shut down is to remove battery it han never done this before now hope you can help me with this problem
thx Sean
thx Sean
Disk Defrag
Buongiorno,
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
Duda
Estimados amigos:
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.