1897 questions
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
play game without lag
i am playing the game is heavy than 60gb so i have a question
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Since installing BoostSpeed and using the various tools, my computer Location function is no longer operable. In Settings, all options to switch location settings on are greyed out. I have follewed various YouTube suggestions to no avail. One Registry key the videos refer to I don't seem to have anymore, although I can't find it deleted in BoostSpeed bin. The key is:- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lfsvc\TriggerInfo
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
windows 10
Hi, when cleaning up windows 10 by using boostspeed 12, it deletes all my downloaded files and videos ! how to resolve or avoid this ??? Thanks in advance
L Lantveld
L Lantveld
Bluescreen after using Driver Updater
Hi there,
Just installed my Driver Updater on my new PC and after updating the drivers and a required restart I get a Bluescreen with the message "Inacessible Boot Device" adn restarting does not help, nor does turning the desktop off and on again.
What to do now?
Christoph
PS: The "Device" above is probably incorrect as I'm writing this from my laptop.
Just installed my Driver Updater on my new PC and after updating the drivers and a required restart I get a Bluescreen with the message "Inacessible Boot Device" adn restarting does not help, nor does turning the desktop off and on again.
What to do now?
Christoph
PS: The "Device" above is probably incorrect as I'm writing this from my laptop.
Store and related apps don't open
Al Microsoft apps including store will not open. I have attempted to restore the app ID service but get an "access denied" popup when clicking "apply". All other methods to restore the service have hailed as well. In conjunction, I am getting a notification that McAfee and Windows Defender are both turned off when McAfee is actually running.
SSD optimization
Hello
I am using SSDs optimization for my SSD drive but I found out on the internet and youtube that I should not defragment my SSD, just let window trim does the work. I would like to know if Auslogic do any good for SSD and is it gonna insert extra "write" to my SSD? If it is the case I would rather use Window trim since I saw SSD optimization also do defragment task when I optimize with Auslogic Bootspeed 12
Best
I am using SSDs optimization for my SSD drive but I found out on the internet and youtube that I should not defragment my SSD, just let window trim does the work. I would like to know if Auslogic do any good for SSD and is it gonna insert extra "write" to my SSD? If it is the case I would rather use Window trim since I saw SSD optimization also do defragment task when I optimize with Auslogic Bootspeed 12
Best
activation
it is not possible to activate this application with this key
Content hidden to protect privacy
recovery of duplicate files accidentaly removed
I have removed duplicate files using the software, unfortunately i lost many RAW files of the photographs instead of JPEG versions of the RAW files, I wish to recover my raw files which was deleted first from the hard drive into the recycle bin and removed from there, the RAW files are Nikon NEF files. I am enclsong the JPEG of the RAW file which was deleted, many other RAW files were also lost accidentally ,
Постоянно отключается Wi-Fi
Постоянно отключается Wi-Fi на моём десктопе. Что необходимо сделать в настройках компьютера, чтобы wi-fi не отключался самостоятельно?
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Integrator.exe wird blockiert
Beim Versuch, Boost Speed von der Taskleiste aus zu öffnen, erscheint folgende Mitteilung:
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
battery is not displayed in pannel
Dear sir,
I have hp15s laptop. the battery iof the laptop is not visible. and whenever i remove the charging cable the laptop turns off automaticaly. how can i check if my battery is realy worn out or there is some issue with the connector
I have hp15s laptop. the battery iof the laptop is not visible. and whenever i remove the charging cable the laptop turns off automaticaly. how can i check if my battery is realy worn out or there is some issue with the connector
optimize put topaz studio into reccle bin
recycle bin is getting ful ans auslogics wants to empty it. How to I get topas=z back
I have windows installed on my SSD and HDD so how do I transfer data from one installation to the other without cloning
So I got and installation of windows on my SSD and HDD, but now I want to shift my files from HDD to SSD installation and then delete windows from HDD, but I don't want to clone(unless it doesn't clone windows installation and other files that I already installed on the SSD) my current installation(HDD) as it was pirated while the other one is legal, and by data I mean everything from text files to programs I installed, so I just want the user data and programs I installed to be shifted to my SSD without deleting windows from SSD and cloning the HDD one. Pls Help as quickly as possible,
High system resource usage detected
To whom correspond: A few months ago I have been experiencing a slow response on my computer.
Every day I do a scanning and resolve of issues found through this tool, however still suffering this issue.
Is there something you can help. My computer is a LENOVO AIO 520-24AST.
AMD A12-9720P RADEON R7, 12 COMPUTE CORES 4C+8G 2.70 GHz
Windows 10 Home, 21H2 VERSION
Hard disk with 1T storage (298 GB used , and 631 GB free)
I will be looking forward for your response.
Regards
Every day I do a scanning and resolve of issues found through this tool, however still suffering this issue.
Is there something you can help. My computer is a LENOVO AIO 520-24AST.
AMD A12-9720P RADEON R7, 12 COMPUTE CORES 4C+8G 2.70 GHz
Windows 10 Home, 21H2 VERSION
Hard disk with 1T storage (298 GB used , and 631 GB free)
I will be looking forward for your response.
Regards
Корзина
почему, после того, как ваша программа предлагает мне отчистить корзину, после сканирования и предложения исправить ошибки, корзина остается не очищенной? у меня возникает подозрение, что фактически ваша программа только создает видимость работы, а на самом деле ничего не делает!
Notifications
I use Bitdefender VPN for anonomous web usage on my Windows 10 desktop computer. I connect to the internet using a USB wifi adapter. Last week the program updated. Now everytime I connect I get a message from BoostSpeed 12 about an attempt to change DNS detected. The next line states- Adapter:TAP Windows Adapter v9. The next line states-Value: 198.51.100.1
How do I stop getting this particular notification without stopping all notifications?
Thanks
T. Kinstler
mitland@aim.com
How do I stop getting this particular notification without stopping all notifications?
Thanks
T. Kinstler
mitland@aim.com
Performace Issues
Recently, Whenever I reboot my system and run "scanner" I end up with 74 performance issues (file extension) like:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.asf\OpenWithList
Resolve supposedly corrects the problem, as with rescan, no issues remain. They reappear after reboot!
FYI, ccClean finds no registery issues.
windows 10 very slow
Hi,
My windows 10 always very busiy in 15-20 minutes almost every morning. I have install auslogic and it has make my workstation
far faster then. But after 2-3 weeks my workstation is back very slow / freeze and sometime s takes more than 30 minutes before it
can be used again
The disk activity always 100% in the morning for about 15-20 minutes . Have installed also the free version of AVG
My windows 10 always very busiy in 15-20 minutes almost every morning. I have install auslogic and it has make my workstation
far faster then. But after 2-3 weeks my workstation is back very slow / freeze and sometime s takes more than 30 minutes before it
can be used again
The disk activity always 100% in the morning for about 15-20 minutes . Have installed also the free version of AVG
Register errors
I just purchased BoostSpeed 12 and installed, but errords pop when I try to enter my license key. I'm going to attempt to uninstall and reinstall in the meantime.
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7