Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Lizenz
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
Thank You
James Elder
windows 10
L Lantveld
Bluescreen after using Driver Updater
Just installed my Driver Updater on my new PC and after updating the drivers and a required restart I get a Bluescreen with the message "Inacessible Boot Device" adn restarting does not help, nor does turning the desktop off and on again.
What to do now?
Christoph
PS: The "Device" above is probably incorrect as I'm writing this from my laptop.
Store and related apps don't open
SSD optimization
I am using SSDs optimization for my SSD drive but I found out on the internet and youtube that I should not defragment my SSD, just let window trim does the work. I would like to know if Auslogic do any good for SSD and is it gonna insert extra "write" to my SSD? If it is the case I would rather use Window trim since I saw SSD optimization also do defragment task when I optimize with Auslogic Bootspeed 12
Best
activation
it is not possible to activate this application with this key
recovery of duplicate files accidentaly removed
Постоянно отключается Wi-Fi
Gah. Cannot access Report
Integrator.exe wird blockiert
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
battery is not displayed in pannel
I have hp15s laptop. the battery iof the laptop is not visible. and whenever i remove the charging cable the laptop turns off automaticaly. how can i check if my battery is realy worn out or there is some issue with the connector
optimize put topaz studio into reccle bin
I have windows installed on my SSD and HDD so how do I transfer data from one installation to the other without cloning
So I got and installation of windows on my SSD and HDD, but now I want to shift my files from HDD to SSD installation and then delete windows from HDD, but I don't want to clone(unless it doesn't clone windows installation and other files that I already installed on the SSD) my current installation(HDD) as it was pirated while the other one is legal, and by data I mean everything from text files to programs I installed, so I just want the user data and programs I installed to be shifted to my SSD without deleting windows from SSD and cloning the HDD one. Pls Help as quickly as possible,
High system resource usage detected
Every day I do a scanning and resolve of issues found through this tool, however still suffering this issue.
Is there something you can help. My computer is a LENOVO AIO 520-24AST.
AMD A12-9720P RADEON R7, 12 COMPUTE CORES 4C+8G 2.70 GHz
Windows 10 Home, 21H2 VERSION
Hard disk with 1T storage (298 GB used , and 631 GB free)
I will be looking forward for your response.
Regards
Корзина
Notifications
How do I stop getting this particular notification without stopping all notifications?
Thanks
T. Kinstler
mitland@aim.com
Performace Issues
Recently, Whenever I reboot my system and run "scanner" I end up with 74 performance issues (file extension) like:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.asf\OpenWithList
Resolve supposedly corrects the problem, as with rescan, no issues remain. They reappear after reboot!
FYI, ccClean finds no registery issues.
windows 10 very slow
My windows 10 always very busiy in 15-20 minutes almost every morning. I have install auslogic and it has make my workstation
far faster then. But after 2-3 weeks my workstation is back very slow / freeze and sometime s takes more than 30 minutes before it
can be used again
The disk activity always 100% in the morning for about 15-20 minutes . Have installed also the free version of AVG