1858 questions
Boostspeed 13 startup externalized to Windows desktop every boot
Everytime I boot up my Windows 10 laptop, Boostspeed 13 i set to startup in the settings, however on each boot, the Boostspeed dashboard is extranalized to the Windows desktop and always at the Registry Analysis tab.
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
Spinner GIF Keeps Spinning on Some Websites
Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
printer malfuntion after running Boostspeed 13
After running Boostspeed 13, my printer either stops working with a "user intervention needed" , or it stops printing in color. What settings can I use to avoid this problem? I may have to quit using Boostspeed
Driver Issues
Hello Dear Sir, Madam,
We have a AMD Radeon HD 6950 Graphics Card,
I looked all over the Internet for the right driver.. But I cannot find the one that works on our pc..
We use Windows 11 Pro X64
I have tried the most of drivers I could find, but none of them work as they should...
We have a HDR Display now, And with some drivers it is disabled.. Others it works with no problem.
As soon as we want to start a game for example Hitman 3..
It Does not start.. And with other games it prompts me to look for the new drivers for our graphics card...
That it is outdated... So please please help us fix this problem?
It would mean the world to us!!
I have added a pic, of the properties of the card with it, using the program speccy
Thanks for the help!
Best Regards!
We have a AMD Radeon HD 6950 Graphics Card,
I looked all over the Internet for the right driver.. But I cannot find the one that works on our pc..
We use Windows 11 Pro X64
I have tried the most of drivers I could find, but none of them work as they should...
We have a HDR Display now, And with some drivers it is disabled.. Others it works with no problem.
As soon as we want to start a game for example Hitman 3..
It Does not start.. And with other games it prompts me to look for the new drivers for our graphics card...
That it is outdated... So please please help us fix this problem?
It would mean the world to us!!
I have added a pic, of the properties of the card with it, using the program speccy
Thanks for the help!
Best Regards!
Файлы родителей
Здравствуйте,у меня на компьютере есть нужные родителям файлы но я хочу запустить очистку дисков как я могу уберечь или восстанавить эти файлы(это изображения, флешки нет)?
wrong core amount
Hi,
Your program ver 13 reports that my I7 13700k have 12 cores but its supposed to be 16 with 24 treads. Why is that ?
Your program ver 13 reports that my I7 13700k have 12 cores but its supposed to be 16 with 24 treads. Why is that ?
BoostSpeed always errors off
I installed 3 times and did 3 scans but each time it said:
Error EDrive not found Exception. Drive could not be found.
What can I do?
Error EDrive not found Exception. Drive could not be found.
What can I do?
external hard drive recovery
so i have ran check disk a few times on a external hard drive to see if i can possibly repair the thing and if not recover some things that are still on it. windows does not recognize the drive but 3rd party software does, so as i'm running check disk it sees one bad sector like at somewhat of the begging of the scan then it continues and runs almost to the end of the scan but does'nt qiute finish the scan, instead it suddenly stops, the screen goes black for a second and then it reboots windows and thats it. no log of what happened at the time of crash or the condition of the drive or the end result...nothing. so i'm wondering if you can shed some light on the situation and maybe some remedies if any? thanks, cweklund
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
Annoying Windows Pop Up Notification
A few months ago, it started to show up an annoying Windows pop up message stating that my laptop (Lenovo, Windows 10) needs DirectPlay feature. I don't even know what is DirectPlay neither what is used for. The message displays two options: install or skip installation of DirectPlay. No matter what I choose it keeps showing up every time I turn on my laptop.
my question is: how can I get rid of this annoying pop up Windows notification?
my question is: how can I get rid of this annoying pop up Windows notification?
Memory Insufficient
I am running Auslogics Disk Defrag 11 on a Windows 2012 R2 server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Drive local do Windows C:
I have on disk C: With 166 GB, the Windows 11 operating system and I just want the drive C: for Windows. In recent days it has been full and does not allow me to manage the available space, as it has free only 1.6 GB and honestly I do not know how to reduce files in C: which I find too risky because I can collapse the system. What was at risk of happening today. I ask: can you help me? Thanks
Manuel Araújo
Manuel Araújo
RAM is getting full most of the time
Hi,
I have an 8GB RAM and getting full most of the time.
Is there a way or app that can auto optimize my RAM?
Looking forward to your reply.
Many thanks!
Regards,
Mark
I have an 8GB RAM and getting full most of the time.
Is there a way or app that can auto optimize my RAM?
Looking forward to your reply.
Many thanks!
Regards,
Mark
auslogics boostspeed
i hava auslogics boostspeed 12 and i paied for the new version 13. i didn't get he new version. can you send me a link to download the ne version.
fichiers très très longs (240-250 caractères)
Solution pour les supprimer ils sont souvent dans USERS et/où windows 11
Memory problems & Upgrade question
I want to upgrade to 13, but the only offer I have is for 3 PC's. I don't have 3; only 1 Is there a discounted rate now and in the future for one app?
I also have a problem with the fact that I have to use 2 memory hog apps. Do you have an app (similar to Iobit's) that will allow me o release unnessecary memory?
I also have a problem with the fact that I have to use 2 memory hog apps. Do you have an app (similar to Iobit's) that will allow me o release unnessecary memory?
Moving the $HOME$ Folder to amother drive
1. I regularily reinstall my system and need to move the system directories to another location.
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
Integrator.exe wird blockiert
Beim Versuch, Boost Speed von der Taskleiste aus zu öffnen, erscheint folgende Mitteilung:
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
windows 10 very slow
Hi,
My windows 10 always very busiy in 15-20 minutes almost every morning. I have install auslogic and it has make my workstation
far faster then. But after 2-3 weeks my workstation is back very slow / freeze and sometime s takes more than 30 minutes before it
can be used again
The disk activity always 100% in the morning for about 15-20 minutes . Have installed also the free version of AVG
My windows 10 always very busiy in 15-20 minutes almost every morning. I have install auslogic and it has make my workstation
far faster then. But after 2-3 weeks my workstation is back very slow / freeze and sometime s takes more than 30 minutes before it
can be used again
The disk activity always 100% in the morning for about 15-20 minutes . Have installed also the free version of AVG
Notifications
I use Bitdefender VPN for anonomous web usage on my Windows 10 desktop computer. I connect to the internet using a USB wifi adapter. Last week the program updated. Now everytime I connect I get a message from BoostSpeed 12 about an attempt to change DNS detected. The next line states- Adapter:TAP Windows Adapter v9. The next line states-Value: 198.51.100.1
How do I stop getting this particular notification without stopping all notifications?
Thanks
T. Kinstler
mitland@aim.com
How do I stop getting this particular notification without stopping all notifications?
Thanks
T. Kinstler
mitland@aim.com
boite mail
Bonjour j aurais besoin que vous m aidiez , je peux ouvrir ma boite mail depusi plusieurs jours la page était a a s'ouvrir donc je me deconnectais je remettais mon identifiants et mot de passe mais ce matin pu rien l ordi ne me donne pu la page poiur mettre ces infos martine_viellet@sfr.fr
Why does boostspeed try to defragment SSDs?
Why at all? Especially when Diskeeper 18 from Condusiv is running? How can I disable just that portion of Boostspeed so it never interferes and puts unnecessary load on the SSD?
Paid for Pro version via paypal yesterday but no activation code sent
Hello, I paid for your pro version via paypal yesterday but have not receivedan activation code. I could possibly have given a wrong e-mail address.
Name is David Jamieson and e-mail should be *********** although I sometimes use ************
Can you please check what is wrong? I will have to contact paypal to stop payment if I don't get a quick answer. Thanks in advance, David JAMIESON
Defrag Ultimate
I have Boostspeed 12.
Is there any benefit in having Defrag Ultimate? Boostspeed 12 includes defrag. Can Defrag Ultimate do anything the defrag in Boostspeed can't do?
Is Defrag Ultimate only intended to be used with Boostspeed 11, and earlier versions of Boostspeed?
Thank you.
Is there any benefit in having Defrag Ultimate? Boostspeed 12 includes defrag. Can Defrag Ultimate do anything the defrag in Boostspeed can't do?
Is Defrag Ultimate only intended to be used with Boostspeed 11, and earlier versions of Boostspeed?
Thank you.
Desktop INI
How do I use Boost speed 12 to get rid of this issue where Notebook opens at start up with
[.ShellClassInfo]
LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787
[.ShellClassInfo]
LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787
ripristino funzionamento IRDA
Buonasera
per un breve periodo con windows 10 ha funzionato l'IRDA (infrarosso) che uso per scaricare i dati di un vecchio cardiofrequenzimetro dopo un aggiornamento l'IRDA non ha più funzionato e nonostante le ricerche su internet per la risoluzione del problema e l'applicazione dei parametri consigliati sempre su internet la mia pennetta IRDA non funziona. Sapete, per cortesia, indicarmi un modo per ripristinare il funzionamento dell'IRDA?.
Ringrazio per la gentile attenzione bisegna tonino
Orphaned Print Spooler Files
I have two Dymo Turbo 450 label printers. A recent Windows 10 update caused them to print blank labels. Dymo wrote new software to address the issue. When I installed the new software, my printers stopped working entirely. I blamed the new software and tried innumerable ways to fix the issue to no avail. What it turned out to be was a couple of orphaned files in their print spooler folder. I stopped the spooler, deleted the files, restarted the spooler, and all works well. Can you add that item to your software, i.e. check and remove orphaned files in the print spooler folders?
Register errors
I just purchased BoostSpeed 12 and installed, but errords pop when I try to enter my license key. I'm going to attempt to uninstall and reinstall in the meantime.
Boostspeed lost Pro licence
I have a Pro licence for Boostspeed and for Malware but both appear to be disabled. If I try to activate the program and enter the activation key I initially get a message saying that the program is registered. However it isn't and the the status is still to upgarde or acivate Pro.
If I close the program completely and try to re-run I get a message saying that the administrator is blocking me via integrator.exe,
however I am the administrator.
Hope you can help.
If I close the program completely and try to re-run I get a message saying that the administrator is blocking me via integrator.exe,
however I am the administrator.
Hope you can help.
code
I cannot retreive my code for boostspeed 10 I got early this year, can you send it to me so I can sign up for bootspeed 11 PRO
Thanks a lot
Disable textinputhost.exe on Windows 10
Hi there
This file is obviously spyware, and logs every key stroke one makes. I use to be able to disable it and did delete it using BoostSpeed13, but now it has locked itself, so i can no longer disable or delete it.
When i disable it, it shows in the task manager and the Services tab that it is still running even with it being disabled. If i close it using task manager, as soon as i hit a key on the keyboard, it reopens. There is one other program that is very similar to this and also opens and runs, clipmanager i think it is called. I can disable this, but it also comes back, not immediately but normally within the day.
How can i deleted these files or disable them perminently - they were never part of Windows 10 until very recently, so hence i beleiev e they are key logers and spyware.
Thanks in advance
Gav
This file is obviously spyware, and logs every key stroke one makes. I use to be able to disable it and did delete it using BoostSpeed13, but now it has locked itself, so i can no longer disable or delete it.
When i disable it, it shows in the task manager and the Services tab that it is still running even with it being disabled. If i close it using task manager, as soon as i hit a key on the keyboard, it reopens. There is one other program that is very similar to this and also opens and runs, clipmanager i think it is called. I can disable this, but it also comes back, not immediately but normally within the day.
How can i deleted these files or disable them perminently - they were never part of Windows 10 until very recently, so hence i beleiev e they are key logers and spyware.
Thanks in advance
Gav
Постоянно отключается Wi-Fi
Постоянно отключается Wi-Fi на моём десктопе. Что необходимо сделать в настройках компьютера, чтобы wi-fi не отключался самостоятельно?
Computer freezes for 5 - 6 seconds every 2 - 3 minutes, maybe less.
Hi there,
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7