1897 questions
Not able to install an upgrade for Boostspeed 12.2.0.0
I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
The System Information report for my external backup hard drive above shows the following;
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Delete wrong user
After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
Windows refusing access as administrator
Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
Could not activated my license
I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
Program not registered
As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.
Thank you
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
Content hidden to protect privacy
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
Content hidden to protect privacy
THANK YOU
Aktivation not Possibel
Hi
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Content hidden to protect privacy
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー：
Auslogics BoostSpeed 12
Content hidden to protect privacy
Pro version ?
Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
When trying to open Boostspeed, I am getting a popup stating Admin Blocked, go to an Administrator Integrator.exe. How can I clear this. If I re-download the basic program will open, when I type in my registration code, I'm sent to the store pager in AOL. Any help with this problem would be appreaciated.
Thank You
James Elder
Thank You
James Elder
Cannot connect Wifi.无法连接无线网
Hello, I used Auslogics BoostSpeed 13 to clean up the data. After cleaning, my DELL notebook (DELL 5520) could not connect to the wireless network. I could not connect to the network by using the external network card or the external network cable. How should I solve it? Looking forward to your reply, you can also reply me at 1574426325@qq.com
您好，我用Auslogics BoostSpeed 13进行了数据清理，清理之后，我的戴尔笔记本(DELL 5520)无法连接无线网，使用外置网卡、外接网线都无法连接网络。请问应该如何解决？期待您的回复，您也可以回复我的邮箱：
Content hidden to protect privacy
Активация PRO
почему при вводе ключа регистрации программа не активируется до версии PRO, хотя на сайте пишет, что ключ верный и программа зарегестрирована и так на всех устройствах
Computer freezes for 5 - 6 seconds every 2 - 3 minutes, maybe less.
Hi there,
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
Windows Event Viewer and Auslogics BoostSpeed 12
I am having ongoing issues with my MSI GL65 Leopard suddenly "freezing" (GUI becomes totally unresponsive) while I am streaming, using cloud drives (One Drive, SharePoint, etc) or have multiple applications running in Windows (Outlook, Teams, Microsoft Word, etc). I am forced to to hit the power button and reboot -- often losing my work in the progress.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
Paid for Pro version via paypal yesterday but no activation code sent
Hello, I paid for your pro version via paypal yesterday but have not receivedan activation code. I could possibly have given a wrong e-mail address.
Name is David Jamieson and e-mail should be *********** although I sometimes use ************
Can you please check what is wrong? I will have to contact paypal to stop payment if I don't get a quick answer. Thanks in advance, David JAMIESON
Процесс System грузит процессор.
Добрый день, хотел бы задать такой вопрос, процесс System очень сильно грузит процессор призапуске определённого приложения, загрузка порядка 33%-35%. Но если это приложение отключено и запущены какие то други программы, то всё в порядке, System процессор не загружает, подскажите можно ли это как то решить?
pictures
After installing BOOTSPEED 12 and doinG a full scan THE PICTURES IN MY PICTURE FOLDER VANISHED FROM MYCOMPUTER
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
Orphaned Print Spooler Files
I have two Dymo Turbo 450 label printers. A recent Windows 10 update caused them to print blank labels. Dymo wrote new software to address the issue. When I installed the new software, my printers stopped working entirely. I blamed the new software and tried innumerable ways to fix the issue to no avail. What it turned out to be was a couple of orphaned files in their print spooler folder. I stopped the spooler, deleted the files, restarted the spooler, and all works well. Can you add that item to your software, i.e. check and remove orphaned files in the print spooler folders?
key not working.
The following two keys of my Dell Inspiron laptop is not workin ;
1) 'Delete' key
2) 'Down arrow' key.
My laptop's system drive is 'C', one of the system folder in drive 'C' is occupying too much of space. I am pretty sure that there are plenty of unnecessary data and file. How can I find which one to keep and which one to delete, pls advice.
1) 'Delete' key
2) 'Down arrow' key.
My laptop's system drive is 'C', one of the system folder in drive 'C' is occupying too much of space. I am pretty sure that there are plenty of unnecessary data and file. How can I find which one to keep and which one to delete, pls advice.
PROバージョンを有効にするについて
常に” PROバージョンを有効にする ”が表示され、 PROバージョンでは無いようです、入るにはどうしますか？
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか？
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか？
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
Bootspeed pro
I own a copy of Bootdspeed Pro. I cannot delete the Google cookies from Protect browser.
Help.
Dr. Brian Casey
Help.
Dr. Brian Casey
Fn клавиша на ноутбуке
Здравствуйте! Перестала работать клавиша FN + F1, F2 ... и т.д. Не могу в играх убавить звук, яркость. Полагаю перестал работать драйвер отвечающий за эту функцию. Пожалуйста, помогите советом как устранить данную проблему. С уважением, Станислав Викторович.
code
I cannot retreive my code for boostspeed 10 I got early this year, can you send it to me so I can sign up for bootspeed 11 PRO
Thanks a lot
Does this leave adult website traces
So these "rammerhead" links like rammer.rude.li ive been using for accessing anything that is adult and is purported to have privacy becuase its a browser inside your browser that has a different IP to prevent ISP from seeing your activity but it is deteced in adult website traces in privacy of auslogics? is this not really private and is just a false sense of security like incognito?
Ads
I have ads turned OFF in General settings, however an ad pops up everytime after a defrag is completed wanting me to purchase Boostspeed 12. An ad also pops up when I open the program. How do I get rid of these ads since I have purchased this pro version?
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7