1854 questions
Back Button Hijack?
Hello! Today my screen flickered and I couldn't use any browsers, I've tried chrome, firefox, edge, opera. It opens and when I try to click a link, it just goes back to the prevous screen. I can't even get your update from the link inthe app. it takes me to your site and when I click on update, it just does nothing. I can't do a search or click a bookmark.
I'm on windows 10 Pro.
I tried a system restore from your app and it failed with an error about the restore point was damaged.%programfiles%\windowsapps
AppxStaging.
So I tried it within windows. same errors.
I can't do anything that involves a browser.
I did a scan with malwarebytes, found nothing.
Not sure how to fix this.
I'm on windows 10 Pro.
I tried a system restore from your app and it failed with an error about the restore point was damaged.%programfiles%\windowsapps
AppxStaging.
So I tried it within windows. same errors.
I can't do anything that involves a browser.
I did a scan with malwarebytes, found nothing.
Not sure how to fix this.
Windows update crashes my computer
Windows update crashes my PC when I try to update it. It will start to download and fail at a certain point, around 7% DL. sometimes it will fully download, but will crash upon install. every time indicating it's rolling back to the previous version. I have Aura for VPN and anti-virus, but it never interfered before. This is now happening on 3 of my machines, and I'm at an absolute loss. The windows update troubleshooter also yields zero results.
Mon PC géle fige
BOnjour
Windows plante mantenant régulièrement, alors que cela n'arrivait jamais avant. Pourquoi ?
Windows plante mantenant régulièrement, alors que cela n'arrivait jamais avant. Pourquoi ?
Lost MBR?
I have about a dozen 2.5" & 3.5" SATA HDs, no bigger than 4TB that I have been using for years without issue. They are used in conjunction with via a WAVLINK eternal docking station, holds 2 drives" to USB. Recently, one HDs, 3TB one, when I tried to use it, I got an error message, "invalid parameter", "drive is not accessible or corrupted" or something like that. So I used the DSK command in Window 11 and it showed up as a "healthy drive" but showed up as "RAW" (needed to be formatted basically of course) instead of NTFS as it should be. I took this situation to be a fluke but just now, with two 4TB drives in at the same time in the docking station, the same thing happened TO THEM BOTH. I had them connect to my laptop for several hours then suddenly got the "drive not accessible" error. Same issue as before basically and back to RAW. Correct me if I'm wrong but does this very likely indicate that the docking station is creating this problem all of a sudden? It's either that or my laptop is sending something out to the drives that is causing this. Give me your opinion. My bottom question is, I'm assuming the MBR got corrupted or disappeared, of course there could be something else but it's been a very long time since I have messed with HDs on this level. Is there any way without having to send the drives out to have them professionally recovered, something I can do myself at home to re access the drives normally? Thanks in advance, Jim.
transfer from pc windows7 to pc windows11
hi
can you tell me the quickest way to transfer all hard drive data from one pc to another
can you tell me the quickest way to transfer all hard drive data from one pc to another
firefox issue
each time i open Firefox it appears accordinig to TASK MANAGER
that anywhere from 12-20 instances of Firefox are running which consume
CPU & MEMORY resources s;lowing down my entire operation
How can i correct this & eliminate more than 1 instance of FF opening & running ?
thank you
Optimización de la memotria Ram
Hola, me pueden ayudar a configurar la optimización de la memotria Ram de mi PC con BootSpeed 13?
Gracias
Gracias
MS Constantly changes default brower and search engin
I am econstantly having to replace the default browser and search back to Chrome & Google becaseu Microsoft changes them to Edge & Bing.
Is it possible to control this in the Registry?
Is it possible to control this in the Registry?
Bluetooth keyboard pairing problem
Hello,
When pairing the device, the system and Bluetooth recognizes it, but NO WINDOW APPEARS to enter the pairing code.
I have tried it several times, but always with the same result. The device I want to connect is a MX KEEYS MINI keyboard. My system is Windows 10 LTSC 2019.
The technical service of the keyboard manufacturer (Logitech) has not been able to give me a solution.
Thank you in advance for your help, I remain at your disposal for any additional information that could be useful to you.
computer freezing a lot
I was having a lot of problems with programs and browsers closing, after I installed auslogic, it improved, but I was afraid of it being some deep virus, how can I know, I have the antivirus, but I still have my doubts, because the PC gave a improved, but you will know
Default browser issues
I set Chrome as Windows 11 default browser and Google as search engine Microsoft keeps changing broweser to Edge & Bing.
Can Auslogic Registry Cleaner detect and fix such unauthorised changes?
Can Auslogic Registry Cleaner detect and fix such unauthorised changes?
start up automatic repair comes up which keeps coming up forever
I have a problem with every time I start up automatic repair comes up which keeps coming up forever if I don't click F8 and click Disable forced Driver Signature! After I click F8 windows starts up and runs normally. what do i do this problem? Can you help me? Hope you have a solution for me.
With best regards
Peter Hansen
Content hidden to protect privacy
Clearing Privacy History issues
Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
auslogics driver updater causes WINDOWS 10 to be disabled
I have the Auslogics Driver updater and used it on my ACER laptop , which is only 3 years old.
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
Programa não esta fazendo scan
Quando eu peço para fazer varredura o programa interrompe e apresenta o seguinte log
Does disappear language icon ?
Tell me how to retrieve language icon it switches different typewritings?
transferring data and Auslogics
Hi. This may be out of your field, but...
I am relaunching a small nonprofit. Part of the process is transferring files from a worn out laptop (using now) to a newer refurbished one. I'm using the free version of Auslogics Speed to clean up the old laptop before transferring data to new. We will be subscribing to the paid version for the newer laptop after I get the transfer done.
In the past, I've had to have someone transfer data using specific cables. Is there an Auslogics or other software that can be used to do the transfer without hardwiring? Novice here techwise. And, it's always been my experience that no matter how successful the data transfer, the folder and files have to be manually reconstructed. A work-around would be great.
I need t leave home now but will return about 4:30 Pacific. Yes, I know that's asking a lot, so I appreciate whatever you can share about the challenges I'm facing.
Onward,
Will Anderson
greenvegans.org
Empty Folder Cleaner and Windows
Does the Empty Folders Cleaner differentiate which folders should and should not be deleted in the Windows OC? The tool identifies hundreds in my C drive, and I assume those in the Windows' System, Program Files, Windows32, etc. should NOT be deleted, but I can't tell.
aidez-moi à installer Windows11 à partir de Winsdows10
Nom de l'appareil Asus-N732V
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
My BoostSpeed app will not recognise my Pro status
Examples of this issue in the atchd doc.
My BoostSpeed is the Pro level app and it is good for another 300+ days. However, the app does not know this fact. It will not allow me access to the Pro features. It requires me to buy the Pro level features. I do not understand how the app indicates I have Pro yet at the same time the app thinks I only have the free version.
I do have and have paid for Pro for the 300 days.
When I tired to re-register the Pro license key, it indicates I'm already Pro registered. Yeah, that's obvious. Why doesn't the app know this?
Thank you for your support and education. Shane Ostrom,
Content hidden to protect privacy
Deleted files
When removing files to speed up the computer, BoostSpeed deleted *.wsw files essential to my business. These are a part of a software application called Website-Watcher and include several hundred "bookmarks" that took years to develop. Can you tell me where they went and how I might recover them?
"Location servises managed by your organization"
I need to fix this. Want to be able locate my laptop in case it gets loss
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7