1897 questions
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
play game without lag
i am playing the game is heavy than 60gb so i have a question
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Since installing BoostSpeed and using the various tools, my computer Location function is no longer operable. In Settings, all options to switch location settings on are greyed out. I have follewed various YouTube suggestions to no avail. One Registry key the videos refer to I don't seem to have anymore, although I can't find it deleted in BoostSpeed bin. The key is:- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lfsvc\TriggerInfo
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
disk has errors message
after using auslogics it says disk has errors . CAN THIS BE FIXED WITH AUSLOGICS
Windows 10 Default System font changed
Hi,
After running all the Auslogics BoostSpeed 12 suggestions, the default system font changed into a horrible blurry type of text. This is across the whole system, including File Explorer, Chrome, Microsoft 365 Office apps (Excel, Word, etc), basically everywhere!
I've attached a screenshot from Chrome to illustrate what the default font looks like now.
How do I restore the original default system font?
Thanks and regards
Andrew
My BoostSpeed app will not recognise my Pro status
Examples of this issue in the atchd doc.
My BoostSpeed is the Pro level app and it is good for another 300+ days. However, the app does not know this fact. It will not allow me access to the Pro features. It requires me to buy the Pro level features. I do not understand how the app indicates I have Pro yet at the same time the app thinks I only have the free version.
I do have and have paid for Pro for the 300 days.
When I tired to re-register the Pro license key, it indicates I'm already Pro registered. Yeah, that's obvious. Why doesn't the app know this?
Thank you for your support and education. Shane Ostrom,
Content hidden to protect privacy
Windows refusing access as administrator
Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
Defrag or No?
Hi
Cool software and company. Thanks for your time.
Someone mentioned I should use this, but also said, in accordance with info online, that "defragging" an onboard SSD will cause issues. I'm directly confused by this and would appreciate some guidance on what is correct here.
Thanks again.
Cool software and company. Thanks for your time.
Someone mentioned I should use this, but also said, in accordance with info online, that "defragging" an onboard SSD will cause issues. I'm directly confused by this and would appreciate some guidance on what is correct here.
Thanks again.
auslogics driver updater causes WINDOWS 10 to be disabled
I have the Auslogics Driver updater and used it on my ACER laptop , which is only 3 years old.
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
Does disappear language icon ?
Tell me how to retrieve language icon it switches different typewritings?
HP x2 210 G2 Detachable PC - Specifications
Hello!
My other device has ATOM x5 8350 / 2Gb Ram / 32 GB SSD
Running WIndows Home
Is there a list of windows services that I can disable in order to get it as lean and functional as possible?
I bought it used and I cannot believe people find these devices functional at all.
Call it a summer project...
My other device has ATOM x5 8350 / 2Gb Ram / 32 GB SSD
Running WIndows Home
Is there a list of windows services that I can disable in order to get it as lean and functional as possible?
I bought it used and I cannot believe people find these devices functional at all.
Call it a summer project...
Intel Graphics Installer Not Prompt Back After Loading For Install
Dear Sir /Madam,
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
Deleted files
When removing files to speed up the computer, BoostSpeed deleted *.wsw files essential to my business. These are a part of a software application called Website-Watcher and include several hundred "bookmarks" that took years to develop. Can you tell me where they went and how I might recover them?
transferring data and Auslogics
Hi. This may be out of your field, but...
I am relaunching a small nonprofit. Part of the process is transferring files from a worn out laptop (using now) to a newer refurbished one. I'm using the free version of Auslogics Speed to clean up the old laptop before transferring data to new. We will be subscribing to the paid version for the newer laptop after I get the transfer done.
In the past, I've had to have someone transfer data using specific cables. Is there an Auslogics or other software that can be used to do the transfer without hardwiring? Novice here techwise. And, it's always been my experience that no matter how successful the data transfer, the folder and files have to be manually reconstructed. A work-around would be great.
I need t leave home now but will return about 4:30 Pacific. Yes, I know that's asking a lot, so I appreciate whatever you can share about the challenges I'm facing.
Onward,
Will Anderson
greenvegans.org
Windows 10 Pro Licencia Retail - No actualiza versión 21H2 - Error 0x800f0922
Recientemente adquirí Licencia Windows 10 Pro.
Introduje el nuevo código de la Licencia en Actualización y Seguridad/Activación/Cambio de licencia.
Regularmente la Actualización solicita Reinicio.
Cuando se lleva a cabo sigue los pasos de Descarga, Instalación, luego Reinicio.
Durante el Reinicio la pantalla deja ver:
"Buscando actualizaciones", "Instalando" (se ve la evolución porcentual) y cuando casi llega a 100%; "No pudimos instalar actualizaciones", "No apague el equipo"
Luego Reinicia nuevamente y se repite lo mencionado.
Y finalmente abre la pantalla de presentación Windows.
Al revisar de nuevo el menú de Actualizaciones, aparece error 0x800f90922.
Aunque ejecuté diversas operaciones (vistas en Youtube), ninguna me dio resultado.
Es posible su ayuda para solucionar éste problema?, por favor.
Gracias! - Saludos
Introduje el nuevo código de la Licencia en Actualización y Seguridad/Activación/Cambio de licencia.
Regularmente la Actualización solicita Reinicio.
Cuando se lleva a cabo sigue los pasos de Descarga, Instalación, luego Reinicio.
Durante el Reinicio la pantalla deja ver:
"Buscando actualizaciones", "Instalando" (se ve la evolución porcentual) y cuando casi llega a 100%; "No pudimos instalar actualizaciones", "No apague el equipo"
Luego Reinicia nuevamente y se repite lo mencionado.
Y finalmente abre la pantalla de presentación Windows.
Al revisar de nuevo el menú de Actualizaciones, aparece error 0x800f90922.
Aunque ejecuté diversas operaciones (vistas en Youtube), ninguna me dio resultado.
Es posible su ayuda para solucionar éste problema?, por favor.
Gracias! - Saludos
Allow list
What do I have to add to Malewarebytes "allowed" list to get your software to run? If I run Malewarebytes it quarantienes your application.
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7