1858 questions
HASP Question...
When windows released their XP version on windows there were a lot of Software Companies selling expensive softwares for Engineering tasks... To secure these advance softwares from thievies,,, they use USB HASP keys,,, that kept operational startups to a specific PC that had a USB ports to allow placement of one of these keys plug in dongles... Then Windows 7 came along and it was the start of half of my HASP starting to fail to work, while some donglescontinue to work... I believe it was the Pro version on Win 7 that had a Xp version attached to it that did help bridge my work a little... Then windows 8 was total failure... Windows 9 never say the day of light... Windows 10 showed up and was so buggy at first, mostly in their third party drivers areas, it was not worth the bother for years... Then Window 11 appeared and once again a solid Windows plateform became realized... But Win 11 has its limits! Now... All versions after Windows 7 failed to support totally all my expensive security keys on all these later versions... I also fully really this long ago and prepare what I would do, and this also included window 7 too... Because of this trouble, I maintain my primary computer running Windows 7 Pro and I also maintain a FAST Dual Xeon Xp computer too... Doing this all my expensive engineering software are still operational, even today... I also know the Hp also does this little trick too... I also complained long ago to Micrsoft many times on this subject, but they ignored me... And,,, I know a insider at Hp who confirmed this for me what I said Hp was doing secretly is true...
Q!uestion: Is there any Third Party solution softwares that can allow Xp era USB Dongle security keys to work on Window 11?
Opinion: I think the answer is NO... I look every once in a while to see on the Internet... But since you said I had a question open, I elected to ask you folks...
Comment: If I were to upgrade some of my Dongle licenses, (And,,, keep in mind that some companies went out of business long ago...) the cost would approach over a Half Million Dollars... They want me to purchase their newer version while my older versions work just fine on my Xp computer,,, when I need to run one of those programs... This is what I plan to do going forward, but if there was a way to run on Windows 11, I like to know how and where...
Comment: It is also been a good thing that many current computer software companies that maintain older versions of window fully understand why this is a good idea to contineue to do... I hope Auslogics does this too... I also put in a comment about your latest Driver software that when I tried it last fail to run on Windows 7 Pro... Not good! I am just pointing this out, because it needs to be pointed out...
Q!uestion: Is there any Third Party solution softwares that can allow Xp era USB Dongle security keys to work on Window 11?
Opinion: I think the answer is NO... I look every once in a while to see on the Internet... But since you said I had a question open, I elected to ask you folks...
Comment: If I were to upgrade some of my Dongle licenses, (And,,, keep in mind that some companies went out of business long ago...) the cost would approach over a Half Million Dollars... They want me to purchase their newer version while my older versions work just fine on my Xp computer,,, when I need to run one of those programs... This is what I plan to do going forward, but if there was a way to run on Windows 11, I like to know how and where...
Comment: It is also been a good thing that many current computer software companies that maintain older versions of window fully understand why this is a good idea to contineue to do... I hope Auslogics does this too... I also put in a comment about your latest Driver software that when I tried it last fail to run on Windows 7 Pro... Not good! I am just pointing this out, because it needs to be pointed out...
tastatur
warum fällt die tastatur bei einem notebook von captiva gekauft 01.01..2021 komplett aus diesess schreibe ich mit der bildschirmtastatur. neupreis: 1.459,- €
CAPTIVA 43,9 cm (17.3") GB7 726IG 20V1
(PB71DDS-G) RTX 2060 6GB/FHD 144 Hz NB
WVA/i7-10750H/MC/SSD 500GB/HDD
1TB/32768/WLAN/BT/w/o OS
1 1459,00 1459,00St
201,24Umsatzsteuer 16 %
1.459,00Summe Brutto
1.459,00Endsumme
EUR
EUR
EUR
1.257,76Gesamt Netto 16 % EUR
Zahlbar per Paypal
DHL National Standard
Zahlung:
Spediteur:
Bedingungen:
inbetriebnahme im januar 2021, ausfall tastatur anfang april 2024
CAPTIVA 43,9 cm (17.3") GB7 726IG 20V1
(PB71DDS-G) RTX 2060 6GB/FHD 144 Hz NB
WVA/i7-10750H/MC/SSD 500GB/HDD
1TB/32768/WLAN/BT/w/o OS
1 1459,00 1459,00St
201,24Umsatzsteuer 16 %
1.459,00Summe Brutto
1.459,00Endsumme
EUR
EUR
EUR
1.257,76Gesamt Netto 16 % EUR
Zahlbar per Paypal
DHL National Standard
Zahlung:
Spediteur:
Bedingungen:
inbetriebnahme im januar 2021, ausfall tastatur anfang april 2024
Sound interface stopped working on Windows 11
My good old Line 6 Toneport KB37, midi controller, and external soundcard combo stopped working on my new PC.
When running on an Asus TUF H310M with a Core i5 9400F and 16GB of RAM, it was working just fine.
Now, on the new setup, a Gigabyte Aorus Elite B760M with a Core i5 13th gen and 32GB of DDR5 RAM, the installation and driver setup ran okay. However, when playing any kind of music or sound file in any player, including YouTube, streaming services, you name it, it doesn't work. The sound feels 'cropped'; it plays extremely slow and low pitched, clearly malfunctioning.
Cubase 12 doesn't even recognize the device or the ASIO drivers for configuration.
I've been using the Toneport KB37 for music production and as a general soundcard for years, and on the old PC, it still works perfectly.
The same USB cable is being used on both PCs.
Am I missing any kind of configuration, new driver, or something that could make it work with Windows 11?
Thanks in advance for your time and help. Any kind of tip or suggestion will be extremely appreciated.
When running on an Asus TUF H310M with a Core i5 9400F and 16GB of RAM, it was working just fine.
Now, on the new setup, a Gigabyte Aorus Elite B760M with a Core i5 13th gen and 32GB of DDR5 RAM, the installation and driver setup ran okay. However, when playing any kind of music or sound file in any player, including YouTube, streaming services, you name it, it doesn't work. The sound feels 'cropped'; it plays extremely slow and low pitched, clearly malfunctioning.
Cubase 12 doesn't even recognize the device or the ASIO drivers for configuration.
I've been using the Toneport KB37 for music production and as a general soundcard for years, and on the old PC, it still works perfectly.
The same USB cable is being used on both PCs.
Am I missing any kind of configuration, new driver, or something that could make it work with Windows 11?
Thanks in advance for your time and help. Any kind of tip or suggestion will be extremely appreciated.
Can I download any of your software on trial basis?
Hi,
Presently I am on trial bases using Auslogics Registry Cleaner 10.
My question is simple. Can I download and install any of the software you offer on a trial basis and if yes please tell me how.
I am mostly curious about the computer speed up app version #13...
Thank you kindly-
Jackson
Presently I am on trial bases using Auslogics Registry Cleaner 10.
My question is simple. Can I download and install any of the software you offer on a trial basis and if yes please tell me how.
I am mostly curious about the computer speed up app version #13...
Thank you kindly-
Jackson
Free disk space issue
I have two external HD of exactly the same size, 3.63 TB, they both hace exactly the same amount of data stored on them both, 1.84 TB, 2240 files, 61 folders. My issue is that the "free space" shows a difference amount, 1.50 TB verse 1.55 TB. I have ensured that recycle bin on them both are empty and ran every program that would make sense with the confines of BoostSpeed 13 and nothing seems to make any difference. This isn't the only example of this sort of thing happening. I'm bewildered. Please advise.
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
PC not powering up
Hi,
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
Drive is 81% fragmented and disk defragmenter does not defrag, just states completed.
Drive is 81% fragmented and disk defragmenter does not defrag, just states completed. How to get the drive to defrag/optimize?
RunDLL Error Messge keeps popping up
I get this message everytime Boostspeed runs:
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
Cannot access tools
I tried to access tools on Boostspeed 13 but got notice "LIbrary not registered" How do I fix this?
Windows File Explore doesn't respond
I did the four scans suggested under Maintenance and the File Explorer has stopped working. I've tried several fixes suggested on line, but nothing works. What to do?
Auslogics icon for all users
I want to know how my husband can get Auslogics on his side of our computer? He tried to download the new version but encountered an error! Is there a fix for this?
Auslogics Driver Updater should I cancel or wait for installation to finish?
I am trying to update my Nvidia GeForce GTX 960 driver via Auslogics Driver Updater and it's taking a very long time to install. I began the process yesterday (29/03/24) at around 7pm and expected it to take a long time to back-up the old driver setting and then download the new driver. I've come back to my computer at 30/03/24 at 1pm and it is still installing.
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Power cord
I have a pc and monitor and the cables got mixed up when moving house.
My monitor is Acer K222HQLBID 21.5 Inch HDMI Monitor.
My personal computer is PACKARD BELL - iMedia S 2885 Desktop PC
One of the cables is a 5amp cable and the other is a 10 amp cable. They both have the same connection at the other end to attach to the equipment.
I cannot find the manuals and am having no success online to find the answer.
Do you know which cable is for the monitor and which cable is for the personal computer.
Which devise is used with the 5 amp cable and which device is used with the 10 amp cable?
My monitor is Acer K222HQLBID 21.5 Inch HDMI Monitor.
My personal computer is PACKARD BELL - iMedia S 2885 Desktop PC
One of the cables is a 5amp cable and the other is a 10 amp cable. They both have the same connection at the other end to attach to the equipment.
I cannot find the manuals and am having no success online to find the answer.
Do you know which cable is for the monitor and which cable is for the personal computer.
Which devise is used with the 5 amp cable and which device is used with the 10 amp cable?
Clearing Privacy History issues
Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
auslogics driver updater causes WINDOWS 10 to be disabled
I have the Auslogics Driver updater and used it on my ACER laptop , which is only 3 years old.
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
Programa não esta fazendo scan
Quando eu peço para fazer varredura o programa interrompe e apresenta o seguinte log
Does disappear language icon ?
Tell me how to retrieve language icon it switches different typewritings?
transferring data and Auslogics
Hi. This may be out of your field, but...
I am relaunching a small nonprofit. Part of the process is transferring files from a worn out laptop (using now) to a newer refurbished one. I'm using the free version of Auslogics Speed to clean up the old laptop before transferring data to new. We will be subscribing to the paid version for the newer laptop after I get the transfer done.
In the past, I've had to have someone transfer data using specific cables. Is there an Auslogics or other software that can be used to do the transfer without hardwiring? Novice here techwise. And, it's always been my experience that no matter how successful the data transfer, the folder and files have to be manually reconstructed. A work-around would be great.
I need t leave home now but will return about 4:30 Pacific. Yes, I know that's asking a lot, so I appreciate whatever you can share about the challenges I'm facing.
Onward,
Will Anderson
greenvegans.org
Empty Folder Cleaner and Windows
Does the Empty Folders Cleaner differentiate which folders should and should not be deleted in the Windows OC? The tool identifies hundreds in my C drive, and I assume those in the Windows' System, Program Files, Windows32, etc. should NOT be deleted, but I can't tell.
aidez-moi à installer Windows11 à partir de Winsdows10
Nom de l'appareil Asus-N732V
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
My BoostSpeed app will not recognise my Pro status
Examples of this issue in the atchd doc.
My BoostSpeed is the Pro level app and it is good for another 300+ days. However, the app does not know this fact. It will not allow me access to the Pro features. It requires me to buy the Pro level features. I do not understand how the app indicates I have Pro yet at the same time the app thinks I only have the free version.
I do have and have paid for Pro for the 300 days.
When I tired to re-register the Pro license key, it indicates I'm already Pro registered. Yeah, that's obvious. Why doesn't the app know this?
Thank you for your support and education. Shane Ostrom,
Content hidden to protect privacy
Deleted files
When removing files to speed up the computer, BoostSpeed deleted *.wsw files essential to my business. These are a part of a software application called Website-Watcher and include several hundred "bookmarks" that took years to develop. Can you tell me where they went and how I might recover them?
"Location servises managed by your organization"
I need to fix this. Want to be able locate my laptop in case it gets loss
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7